Introduction

Usage:

For selective isolation and culture of Staphylococcus aureus.

Principle:

Peptone and beef extract powder provides carbon, nitrogen, vitamins and minerals; D- mannitol to fermentable sugars; higher levels of sodium chloride to provide a higher osmotic pressure, suppress most non-staphylococcal microorganisms ; phenolsulfonphthalein as pH indicator; agar is medium coagulant. Typical pathogenic staphylococci (coagulase positive) D- mannitol produce acid fermentation and produce yellow colonies with a yellow halo, typically non-pathogenic Staphylococcus unfermented D- mannitol to form red colonies.

Formulation(per liter):
Pancreatic digest of casein 5.0g
Pancreatic digest of animal tissue 5.0g
Beef Extract 1.0g
Sodium Chloride 75.0g
Mannitol 10.0g
Phenol Red 0.025g
Agar 15.0g
Final PH 7.4±0.2

How to use：
1.Suspend 111g in 1L of distilled water , stirring heated to boiling to completely dissolve ,autoclave at 121℃ for 15 minutes.
2.Diluted and treated samples.

Quality control：
          　　

Storage: Keep container tightly closed, store in a cool, dry place, away from bright light. Storage period of 3 years.

Specifications: 250g/bottle

250g

Introduction

The HiPure Plasmid EF Maxi Kit combines the power of HiPure technology with Magen’s innovative endotoxin removal technology (ETR) to deliver high-quality plasmid DNA with low endotoxin levels for use in eukaryotic transfection, and in vitro experiments. Up to 1000 µg high copy number plasmid DNA or 200 µg low copy number plasmid DNA can be purified from 150 mL overnight culture.

F&Q about Endotoxin-free Plasmid Extraction Kit — P1156 ←click here

Details

Specifications

Principle

The HiPure Plasmid procedure is based on alkaline lysis of bacterial cells followed by adsorption of DNA onto silica in the presence of high salt. The unique silica membrane used in the kit completely replaces glass or silica slurries for plasmid DNA minipreps. The procedure consists of 3 basic steps: Preparation and clearing of a bacterial lysate by alkaline method，then transfer the supernatant to column to bind DNA. After washing proteins and other impurities, nucleic acid was finally eluted with low-salt buffer (10mm Tris, pH9.0, 0.5mm EDTA).

Advantages

• High purity – purified plasmid can be directly used in sequencing, enzyme digestion and PCR, etc.
• Fast – silica gel column purification is much faster than ion exchange
• High yield – up to 1.5mg plasmid can be binded in one column
• Ultra low endotoxin – content of endotoxin is less than 0.1 EU/μg, which can be directly used for cell transfection and animal injection, etc.

Kit Contents

Storage and Stability

The kit components can be stored dry at room temperature (15–25°C) and are stable for at least 18 months under these conditions. If any precipitates form in the buffers,warm at 37℃ to dissolve. After addition of RNase A，Buffer P1 is stable for 6 months when stored at 2–8°C.

Purchase Guide

For any technical problems or customized products, please contact us.

F&Q about Endotoxin-free Plasmid Extraction Kit — P1156 ←click here

The HiPure Plasmid EF Maxi Kit combines the power of HiPure technology with Magen’s innovative endotoxin removal technology (ETR) to deliver high-quality plasmid DNA with low endotoxin levels for use in eukaryotic transfection, and in vitro experiments. Up to 1000 µg high copy number plasmid DNA or 200 µg low copy number plasmid DNA can be purified from 150 mL overnight culture.

Overview

• Ready-to-use
• Quantitative
• Highly Stable
• Precise
• Nineteen discrete fragments ranging from 100 bp to 10000 bp
• Higher intensity reference bands at 500 bp, 1000 bp and 5000 bp

The Norgen HighRangerPlus 100 bp DNA Ladder is prepared to ensure quality and batch-to-batch consistency. Our HighRangerPlus contains nineteen discrete fragments ranging from 100 bp to 10000 bp with higher intensity reference bands at 500 bp, 1000 bp and 5000 bp. This Ladder is ideal for size determination of digested DNA.

Contents:
1mL of premixed DNA ladder (0.5µg/10µL) in loading buffer (10mM EDTA, 10% glycerol, 0.015% bromophenol blue, and 0.17% SDS).

Details

Supporting Data

Figure 1 / 1

Previous

Next

Click for expanded view

HighRanger Plus 100 bp DNA Ladder (Cat# 12000) – 100 loads

Ladder Properties:

• Nineteen discrete fragments ranging from 100 bp to 10000 bp
• Higher intensity bands at 500 bp, 1000 bp and 5000 bp for easy reference

Recommended Use:
Mix thoroughly. For best results, load 10µL of DNA ladder per well. For precise mass determination with a densitometer, stain gel after electrophoresis using 0.5µg/mL ethidium bromide for 30-40 minutes. The table above shows the size and mass for each band based on 10µL ladder per well.

Storage: 
This kit is stable for 2 years after the date of shipment.

This ladder was standardized using 10µL of DNA per lane on a 0.8 cm thick, 13 x 15 cm, 1.0% agarose gel run in TAE buffer.