N-(Aminooxy-PEG2)-N-bis(PEG3-propargyl) consists of two terminal propargyl groups and an aminooxy group. The propargyl groups reacts with azide-bearing compounds or biomolecules via copper catalyzed Click Chemistry. The aminooxy group is reactive towards aldehydes to form oxime bonds. If a reductant is used, it will form a hydroxylamine linkage. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries. Aminooxy compounds are very reactive and sensitive; they cannot be stored for long term. Immediate use (within 1 week) is highly recommended.

N-(Aminooxy-PEG2)-N-bis(PEG3-propargyl) consists of two terminal propargyl groups and an aminooxy group. The propargyl groups reacts with azide-bearing compounds or biomolecules via copper catalyzed Click Chemistry. The aminooxy group is reactive towards aldehydes to form oxime bonds. If a reductant is used, it will form a hydroxylamine linkage. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries. Aminooxy compounds are very reactive and sensitive; they cannot be stored for long term. Immediate use (within 1 week) is highly recommended.

Introduction

Blood samples contain rich DNA, including mitochondrial DNA, genomic DNA, circulating DNA (mostly released into blood after tumor cell apoptosis) in white blood cells, as well as parasitic viral or microbial DNA. These DNA are important parameters in clinical testing or diagnosis, which are also valuable materials for medical research. There are three main issues with extracting DNA from blood samples:

1. The sample is highly infectious, posing great harm to operators and the environment.

2. The source of DNA is complex and aportion of the nucleic acid, such as viral DNA or free DNA, may be lost during the operation, leading to downstream detection failure;

3. Blood sample contains a large amount of impurities and inhibitory factors.

Currently there are many methods available for extracting DNA from whole blood samples, such as phenol chloroform extraction, salting out method, etc. However, these methods require pre-treatment of blood sample, which removes red blood cells and isolate white blood cells in the first step. Due to the requirement that it cannot inactivate or kill pathogens during the process of removing red blood cells, the waste liquid (red blood cell lysate) and consumables may be contaminated by pathogens and become infectious, posing a danger to the entire laboratory environment and operators. In addition, during the process of removing red blood cells, useful nucleic acid information such as viruses, microorganisms, or circulating DNA is also lost, leading to experiment or detection failures.

The HiPure Blood DNA Kits series provided by Magen Company uses silica gel column purification technology, which can directly lyse whole blood samples without the need for white blood cell separation. Whole blood samples are directly mixed with lysates and proteases, resulting in the inactivation of pathogens, greatly reducing the infectivity, environmental pollution, and the chance of operators being infected. Due to the direct lysis and digestion of samples, except lymphocyte DNA, other circulating DNA as well as DNA from viruses and microorganisms, can also be recovered.

This product provides fast and easy methods for purification of total DNA for reliable PCR and Southern blotting. Total DNA (e.g., genomic, viral, mitochondrial) can be purified from whole blood, tissue and culture cells.

Details

Specifications

Features	Specifications
Main Functions	Isolation total DNA from 10ml blood and 1g tissue using Maxi column
Applications	PCR, southern bolt and virus detection, etc
Purification method	Maxi spin column
Purification technology	Silica technology
Process method	Manual (centrifugation or vacuum)
Sample type	Tissue, cell, blood, saliva, swab, blood spot, semen and other clinical samples
Sample amount	3-10ml
Elution volume	≥700μl
Time per run	≤90 minutes
Liquid carrying volume per column	4ml
Binding yield of column	5mg

Principle

This product is based on silica column purification. The sample is lysed and digested with lysate and protease, DNA is released into the lysate. Transfer to an adsorption column. Nucleic acid is adsorbed on the membrane, while protein is not adsorbed and is removed with filtration. After washing proteins and other impurities, Nucleic acid was finally eluted with low-salt buffer (10mm Tris, pH9.0, 0.5mm EDTA).

Advantages

• High quality DNA – meet a variety of downstream applications, including PCR, qPCR, enzyme digestion, hybridization, etc.
• Fast – without separation of leukocytes, organic extraction or ethanol precipitation
• Simple – all nucleic acids can be obtained by direct digestion
• Pertinence – specially designed for isolating DNA from 3-10ml blood and related body fluids
• Wide applicability – handle a variety of liquid samples
• Economy – excellent cost effectiveness performance

Kit Contents

Contents	D311502	D311503
Purification Times	10	50
HiPure gDNA Maxi Columns	10	50
50ml Collection Tubes	20	100
Buffer ATL	120 ml	550 ml
Buffer AL	120 ml	2 x 300 ml
Buffer GW1*	53 ml	220 ml
Buffer GW2*	25 ml	110 ml
RNase A	40 mg	180 ml
Proteinase K	120 mg	540 mg
Protease Dissolve Buffer	12 ml	50 ml
Buffer AE	30 ml	120 ml

Storage and Stability

Proteinase K, RNase A should be stored at 2-8°C upon arrival. However, short-term storage (up to 12 weeks) at room temperature (15-25°C) does not affect their performance. The remaining kit components can be stored at room temperature (15-25°C) and are stable for at least 18 months under these conditions.

Purchase Guide

Name	CAT NO	Sample amount	Leukocyte protocol*	Colum type	Elutio volume	Average yield	Time per run
HiPure Blood DNA Mini Kit	D3111	10-200μl	1ml	2ml column	≥20μl	5-9μg/200μl	≤30 minutes
HiPure Tissue&Blood DNA Midi Kit	D3113	0.2-2ml	10ml	1.5ml column	≥300μl	20-40μg/1m	≤80 minutes
HiPure Tissue&Blood DNA Maxi Kit	D3115	3 -10ml	10ml	15ml column	≥700μl	20-40μg/1m	≤90 minutes
HiPure Tissue&Blood DNA 96 Kit	D3117	1-200μl	1ml	96 well plate		3-8μg/200μl

*Note：Leukocyte protocol can be used when large volume whole blood samples need to be processed. Whole blood was treated with red blood cell lysate, and white blood cells were obtained by centrifugation before extraction

Blood samples contain rich DNA, including mitochondrial DNA, genomic DNA, circulating DNA (mostly released into blood after tumor cell apoptosis) in white blood cells, as well as parasitic viral or microbial DNA. These DNA are important parameters in clinical testing or diagnosis, which are also valuable materials for medical research. There are three main issues with extracting DNA from blood samples:

 K-LMALQR

SKU: 700004313

1100 assays (microplate) / 1100 assays (auto-analyser)

Content:	1100 assays (microplate) / 1100 assays (auto-analyser)
Shipping Temperature:	Ambient
Storage Temperature:	Short term stability: 2-8oC, Long term stability: See individual component labels
Stability:	> 6 months under recommended storage conditions

Analyte:	L-Malic Acid
Assay Format:	Spectrophotometer, Auto-analyser
Detection Method:	Absorbance
Wavelength (nm):	340
Signal Response:	Increase
Linear Range:	0.5 to 18 μg of L-malic acid per assay
Limit of Detection:	166 mg/L
Reaction Time (min):	~ 3 min
Application examples:	Wine, beer, fruit juices, soft drinks, candies, fruit and vegetables, bread, cosmetics, pharmaceuticals and other materials (e.g. biological cultures, samples, etc.).
Method recognition:	Methods based on this principle have been accepted by AOAC, EEC, EN, NF, NEN, DIN, GOST, OIV, IFU, AIJN, NBN, ISO and MEBAK

This product has been discontinued, you may be interested in the following replacement product K-LMLQR; 700007622)

The L-Malic Acid (Liquid Ready) test kit is a rapid, simple, reliable and accurate method for the specific measurement and analysis of L-malic acid in wine, beverages, foodstuffs and other materials. Supplied as a “ready to use” liquid stable formulation that is suitable for auto-analyser and microplate formats.

Browse more test kit products in our organic acid assay kits list.

Advantages

• PVP incorporated to prevent tannin inhibition 
• “Ready to use” liquid stable formulation 
• Very competitive price (cost per test) 
• All reagents stable for > 18 Months 
• Very rapid reaction (~ 3 min) 
• Standard included 
• Suitable for microplate and auto-analyser formats

This product has been discontinued, you may be interested in the following replacement product K-LMLQR; 700007622)