DBCO-PEG4-C3-sulfonic acid serves as a bifunctional PEG linker. The DBCO click chemistry handle conjugates with azides on target molecules to form stable triazole linkages. The sulfonic acid can participate in esterification, halogenation and displacement reactions.
DBCO-PEG4-C3-sulfonic acid serves as a bifunctional PEG linker. The DBCO click chemistry handle conjugates with azides on target molecules to form stable triazole linkages. The sulfonic acid can participate in esterification, halogenation and displacement reactions.
Norgen’s EXTRAClean Urine Cell-Free Circulating RNA Purification Kits provide a fast, reliable, reproducible, and simple procedure for isolating circulating RNA and exosomal RNA from various urine inputs ranging from 250 μL and up to 30 mL. The purified RNA is of the highest integrity, and can be used in a number of downstream applications including real-time PCR, reverse transcription PCR, Northern blotting, RNase protection and primer extensions, and expression array assays.
EXTRAClean Cell-Free Circulating RNA Purification Mini Kit:
For sample volumes ranging from 250 μL to 2 mL
EXTRAClean Cell-Free Circulating RNA Purification Midi Kit:
For sample volumes ranging from 2mL to 10mL. The first column will handle the large volume input of urine that is followed by a concentration on a mini column for a final elution of 50 μL to 100 μL
EXTRAClean Cell-Free Circulating RNA Purification Maxi Kit:
For sample volumes ranging from 10 mL to 30 mL. The first column will handle the large volume input of urine that is followed by a concentration on a mini column for a final elution of 50 μL to 100 μL.
Figure 1 / 3
Click for expanded view
| Kit Specifications | |
|---|---|
| Sample Type | Fresh or frozen urine |
| Sample Volume Range | 10 to 30 mL |
| Minimum Elution Volume | 50 μL |
| Maximum Elution Volume | 100 μL |
| Time to Complete 10 Purifications | 40–50 minutes |
| Size of RNA Purified | All sizes, including miRNA and small RNA (<200 nt) |
| Average Yields ¥ | Variable depending on specimen |
¥Please check page 5 of the protocol for average urine yields and common RNA quantification methods.
All buffers should be kept tightly sealed and stored at room temperature. These kits are stable for 2 years after the date of shipment. It is recommended to warm Lysis Buffer A for 20 minutes at 60°C if any salt precipitation is observed.
| Component | Mini (Cat. 72900) | Midi (Cat. 72910) | Maxi (Cat. 72920) |
|---|---|---|---|
| Binding Solution K | 25 mL | 75 mL | 1 x 75 mL 1 x 25 mL |
| Lysis Buffer A | 30 mL | 20 mL | 20 mL |
| Wash Solution A | 18 mL | 18 mL | 18 mL |
| Elution Solution A | 6 mL | 6 mL | 6 mL |
| Collection Tubes | 50 | 20 | 10 |
| Elution Tubes (1.7 mL) | 50 | 20 | 10 |
| EXTRAClean Mini Spin Columns | 50 | 20 | 10 |
| EXTRAClean Midi Spin Columns | – | 20 | – |
| EXTRAClean Maxi Spin Columns | – | – | 10 |
| Product Insert | 1 | 1 | 1 |
For the selective isolation and culture of Listeria monocytogenes.
Peptone provides the carbon and nitrogen sources necessary for growth; yeast extract powder and starch provide carbon and nitrogen sources, vitamins and growth factors; sodium chloride can maintain a balanced osmotic pressure; glucose provides a carbon source; Listeria hydrolyzes esculin and reacts with iron ions to form black 6,7-dihydroxycoumarin; mannitol is a fermentable sugar, and phenol red is a pH indicator; lithium chloride and other antibiotics can inhibit Gram-negative bacteria and most Gram-positive bacteria; agar is the coagulant of the culture medium.
| Ingredients | /liter |
| Peptone | 23 g |
| Starch | 1 g |
| NaCl | 5 g |
| Columbia agar | 13 g |
| Mannitol | 10 g |
| Ferric ammonium citrate | 0.5 g |
| Esculin (aesculin) | 0.8 g |
| Dextrose (glucose) | 0.5 g |
| Lithium chloride | 15.0 g |
| Phenol red | 0.08 g |
| pH7.2±0.2 at 25°C | |
Weigh 68.9g of dry powder of this product, add 1L of distilled water or deionized water, stir, heat and boil until completely dissolved, divide into Erlenmeyer bottles, sterilize at 121℃ for 15min, cool to room temperature and set aside. Heat to dissolve agar before use, cool to 50℃, add 1 tube of supporting reagent (SR0140) per 100mL of basal culture medium, shake well and pour into sterilized culture dish.
The following quality control strains were inoculated and cultured at 35-37℃ for 24h. The results are as follows:
| Quality control strains | Growth |
| Listeria monocytogenes ATCC19115 | Gray-green colonies with a black depression in the center and black surrounding |
| Enterococcus faecalis ATCC29212 | – |
| Escherichia coli ATCC25922 | – |
2-30℃，Keep container tightly closed, avoid direct sunlight.
Use before expiry date on the label.
1. When weighing the dehydrated medium, please wear masks to avoid causing respiratory system discomfort
2. Keep container tightly closed after using to prevent clumping.
Microbiological contamination was disposed by autoclaving at 121°C for 30 minutes.
Intended Use For the selective isolation and culture of Listeria monocytogenes. Principle and Interpretation Peptone provides the carbon and nitrogen sources necessary for growth; yeast ex……
K-FRGLQR
SKU: 700004283
1100 assays (microplate) / 1100 assays (auto-analyser)
| Content: | 1100 assays (microplate) / 1100 assays (auto-analyser) |
| Shipping Temperature: | Ambient |
| Storage Temperature: | Short term stability: 2-8oC, Long term stability: See individual component labels |
| Stability: | > 6 months under recommended storage conditions |
| Analyte: | D-Fructose, D-Glucose |
| Assay Format: | Microplate, Auto-analyser |
| Detection Method: | Absorbance |
| Wavelength (nm): | 340 |
| Signal Response: | Increase |
| Linear Range: | 0.4 to 20 µg of D-glucose plus D-fructose per assay |
| Limit of Detection: | 133 mg/L |
| Reaction Time (min): | ~ 13 min |
| Application examples: | Wine, beer, fruit juices, soft drinks, milk, jam, honey, dietetic foods, bread, bakery products, candies, desserts, confectionery, ice-cream, fruit and vegetables, condiments, tobacco, cosmetics, pharmaceuticals, paper and other materials (e.g. biological cultures, samples, etc.). |
| Method recognition: | Methods based on this principle have been accepted by AOAC, EN, NEN, NF, DIN, GOST, OIV, IFU, AIJN, MEBAK and IOCCC |
This product has been discontinued, you may be interested in the following replacement product K-FGLQR; 700007621)
The D-Fructose/D-Glucose (Liquid Ready) test kit is a rapid, reliable and accurate method for the specific measurement and analysis of D-fructose and D-glucose in wine, beverages, foodstuffs and other materials. Supplied as a “ready to use” liquid stable formulation that is suitable for auto-analyser and microplate formats.
Find more of our monosaccharide and oligosaccharide assay kits.
Advantages
This product has been discontinued, you may be interested in the following replacement product K-FGLQR; 700007621)
83, On-nut 88/2 Prawet Sub-district, Prawet District, Bangkok, 10250, Thailand
Tel : 081-875-1869 , 02-328-7179
Email : hej@a3p-scientific.com
Copyright © 2024 A3P Scientific Co., Ltd. All rights reserved. Web by Mountain Studio
Privacy Policy | Terms of Use | Site Map