N-(Propargyl-PEG2)-N-bis(PEG1-alcohol) is a multi-arm linker that can form triazole linkage with azide-bearing compounds or biomolecules via copper catalyzed Click Chemistry. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.
N-(Propargyl-PEG2)-N-bis(PEG1-alcohol) is a multi-arm linker that can form triazole linkage with azide-bearing compounds or biomolecules via copper catalyzed Click Chemistry. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.
Permagen’s 0.2 mL PCR Strip Magnetic rack is designed for magnetic bead separations from Individual tubes, 8-strip, or 12-strip PCR tubes
Accommodates any common PCR strips or individual PCR tubes
Tubes are angled and beads will be pulled to back wall allowing easy aspiration and tip tracking down the front wall of the tubes without disturbing bead pellet
MSR812
Maximum – .2 mL
Minimum – 30 µL
Permagen’s 0.2 mL PCR Strip Magnetic rack is designed for magnetic bead separations from Individual tubes, 8-strip, or 12-strip PCR tubes
This kit is designed for the rapid preparation of genomic DNA from various tissue samples, cultured cells, viruses, bodily fluids and swabs using a rapid spin column protocol. Purified DNA is of an excellent yield and quality, and is immediately ready for any downstream application including PCR, qPCR, genotyping, sequencing and more. The protocol can be completed in approximately 80 minutes (including incubation time).
Figure 1 / 2
Click for expanded view
| Kit Specifications | |
| Column Binding Capacity | 25 µg |
| Average Yield:* HeLa Cells (1 x 106) Tissue (from 10 mg kidney) | 8 µg 10 µg |
| Maximum Amount of Starting Material: Animal Tissues Cultured Cells Bodily Fluids (blood, saliva) Viral Suspension | 20 mg 3 x 106 cells 150 µL 150 µL |
| Time to Complete 10 Purifications | 80 minutes |
* Yield will vary depending on the type of sample processed
Storage Conditions and Product Stability
The Proteinase K should be stored at -20°C upon arrival and after reconstitution. All other solutions should be kept tightly sealed and stored at room temperature. This kit is stable for 2 years after the date of shipment.
| Component | Cat. 24700 (50 preps) | Cat. 24750 (100 preps) | Cat. 24770 (250 preps) |
|---|---|---|---|
| Digestion Buffer A | 25 mL | 2 x 25 mL | 5 x 25 mL |
| Buffer SK | 30 mL | 2 x 30 mL | 5 x 30 mL |
| Wash Solution A | 18 mL | 2 x 18 mL | 5 x 18 mL |
| Elution Buffer B | 30 mL | 2 x 30 mL | 5 x 30 mL |
| Proteinase K | 12 mg | 2 x 12 mg | 5 x 12 mg |
| Spin Columns | 50 | 100 | 250 |
| Collection Tubes | 50 | 100 | 250 |
| Elution Tubes (1.7 mL) | 50 | 100 | 250 |
| Product Insert | 1 | 1 | 1 |
The Flex caddy allows the Thermocycler GEN2 to be installed on the Opentrons Flex deck and sit below the deck, enabling below-deck cable routing and labware placed on top of modules to remain closer to the deck surface. The calibration adapter is used to calibrate the location of the Thermocycler. Caddies and calibration adapters are specific to the type of module.
Note: This item does not include the Thermocycler Module. The module is available with or without the Flex Caddy and Calibration tool: Thermocycler Module GEN2
The Flex caddy allows the Thermocycler GEN2 to be installed on the Opentrons Flex deck and sit below the deck, enabling below-deck cable routing and labware placed on top of modules to remain closer to the deck surface. The calibration adapter is used to calibrate the location of the Thermocycler. Caddies and calibration adapters are specific to the type of module.
Note: This item does not include the Thermocycler Module. The module is available with or without the Flex Caddy and Calibration tool: Thermocycler Module GEN2
83, On-nut 88/2 Prawet Sub-district, Prawet District, Bangkok, 10250, Thailand
Tel : 081-875-1869 , 02-328-7179
Email : [email protected]
Copyright © 2024 A3P Scientific Co., Ltd. All rights reserved. Web by Mountain Studio
Privacy Policy | Terms of Use | Site Map