Tetra(3-methoxy-N-(PEG5-prop-2-ynyl)propanamide) Methane is a branched crosslinker with four terminal propargyl groups. The propargyl groups can react with azide compounds or biomolecules via copper catalyzed Click Chemistry to form a stable triazole linkage.
Tetra(3-methoxy-N-(PEG5-prop-2-ynyl)propanamide) Methane is a branched crosslinker with four terminal propargyl groups. The propargyl groups can react with azide compounds or biomolecules via copper catalyzed Click Chemistry to form a stable triazole linkage.
Features:
1. Programmable microprocessor control system, touch screen indicates rotor No., speed, time, temperature, RCF, rate of speed as well as fault information.
2. Adopts band heater, fast heating speed, temperature uniform, with the function of temperature-control and constant.
3. Centrifugal tube made in special skill, anti-broken when work.
4. Great toque brushless motor, maintenance-free, no powder, fast acceleration and deceleration, low noise, which improve the stability a lot.
5. Electric lid lock, over-speed and over-temperature protection
6.3 phase to keep the best performance.
7. Stainless steel chamber, safe and reliable
TD5B Technical Parameter：
| Max. Speed | 4000rpm |
| Max. RCF | 2498×g |
| Max. Capacity | 4×100ml |
| Time Range | 0~99min |
| Rotor | Swing Out Rotor |
| Noise (dB) | ≤ 58 |
| Temperature | Room temperature:+10~80℃ |
| Acc/Dcc | 10 Kinds |
| Speed Accuracy | ±20r/min |
| Temperature Accuracy | ±1℃ |
| Oil tube size | 37×200mm |
| Size (W x D x Hmm) | 685×500×385mm |
| Net Weight(Kg) | 67KG |
Oil test centrifuge， Heating oil test centrifuge, special tube oil test centrifuge
Norgen’s Legionella sp. TaqMan PCR Kit is designed for the detection of Legionella sp. specific DNA in a real-time PCR based on the use of TaqMan technology. This kit is designed for research use only and not for use in diagnostic procedures. The detection of Legionella sp. specific DNA is based on TaqMan PCR providing a simple, reliable and rapid result for the detection of Legionella sp. infection. Norgen’s Legionella sp. TaqMan PCR Kit includes a PCR control to monitor for PCR inhibition, and to validate the quality of the sample and the detection result. The Legionella sp. TaqMan PCR Kit comprises Master Mix for the target and PCR control detection, Primer & Probe Mix, as well as a positive control and a negative control (nuclease-free water) to confirm the integrity of the kit reagents.
Legionella sp. TaqMan PCR Kit, 100 reactions
Legionella sp. TaqMan PCR Probe/Primer Set and Controls, 100 reactions
For research use only and NOT intended for in vitro diagnostics.
Figure 1 / 3
Click for expanded view
Storage Conditions and Product Stability
All kit components can be stored for 2 years after the date of production without showing any reduction in performance.
All kit components should be stored at -20°C upon arrival.
| Component | Cat. TM64450 (100 rxns) | Cat. TM64410 (100 rxns) |
|---|---|---|
| MDx TaqMan 2X PCR Master Mix | 2 x 700 mμL | – |
| Legionella sp. Primer & Probe Mix | 280 μL | 3 x 70 μL |
| Legionella sp. Positive Control | 150 μL | 3 x 50 μL |
| Nuclease-Free Water (Negative Control) | 1.25 mL | 1.25 mL |
| Product Insert | 1 | 1 |
HiPure DNA Clean Up Kit usesproprietary chemistry and HiPure technology to recover DNA Fragments between20bp-20kbp with yields exceeding 80%. DNA is suitable for ligations, PCR, sequencing,restriction digestion, or various labeling reactions. In addition, this kit canbe also used to recover DNA directly from enzymatic reactions such as PCR andenzyme digestion reactions.
Specifications
| Features | Specifications |
| Main Functions | Recover DNA fragments between 20bp-20kbp from crude DNA and enzymatic reaction solution |
| Applications | PCR, sequencing, labeling reactions, ligations and restriction digestion, etc. |
| Purification method | Mini spin column |
| Purification technology | Silica technology |
| Process method | Manual (centrifugation or vacuum) |
| Sample type | Crude DNA, enzymatic reaction solution |
| Sample amount | <150μl |
| Recovery | 80% |
| Elution volume | ≥15μl |
| Time per run | ≤10 minutes |
| Liquid carrying volume per column | 800µl |
| Binding yield of column | 20µg |
The HiPure system uses a simple bind-wash-elute procedure. Gelslices are dissolved in a buffer containing a pH indicator, allowing easy determination of the optimal pH for DNA binding, and the mixture is applied to the column. Nucleic acids adsorb to the silica-gel membrane in the high-salt conditions provided by the buffer. Impurities are washed away and pure DNA is eluted with a small volume of low-salt buffer provided or water, ready to use in subsequent applications.
Advantages
Kit Contents
| Contents | D214102 | D214103 |
| Purification Times | 100 Preps | 250 Preps |
| Buffer GWP | 30 ml | 60 ml |
| Buffer DW2 | 20 ml | 50 ml |
| Elution Buffer | 30 ml | 60 ml |
| HiPure DNA Mini Columns I | 50 | 250 |
| 2 ml Collection Tubes | 50 | 250 |
Storage and Stability
HiPure DNA Clean Up Kit components are guaranteed for at least one year when stored at room temperature. If any precipitates form in the buffers, warm at 37℃ to dissolve.
HiPure DNA Clean Up Kit usesproprietary chemistry and HiPure technology to recover DNA Fragments between20bp-20kbp with yields exceeding 80%. DNA is suitable for ligations, PCR, sequencing,restriction digestion, or various labeling reactions. In addition, this kit canbe also used to recover DNA directly from enzymatic reactions such as PCR andenzyme digestion reactions.
