Hepatitis B virus (HBV) TaqMan PCR Detection Kits

Permagen’s 0.2 mL PCR / 1.5 mL Microcentrifuge tube separation rack is designed for labs with both PCR strip and 1.5 mL separation protocols. On the top, hold up to two of either 8 or 12 strips, or up to 24 individual tubes. Flip over and hold up to twelve 1.5 mL Microcentrifuge Tubes

Features include solid aluminum alloy design with hard coat finish for years of trouble-free use, rubber feet on both sides to help prevent slipping on work bench, less tippy than common plastic products, and fast separations using any magnetic beads

SKU #

MSR1224B

Features

• Aluminum alloy design for years of trouble-free use
• Fast magnetic bead separations
• Held to tighter tolerances for more consistent results
• Pulls beads to side of wells for easy tip tracking down opposite side
• Rubber feet to help prevent slippage
• Stable design
• Angled tube holes which allow the tubes to come close to magnets

Compatibility

• Most 1.5 mL Microcentrifuge tubes
• Some 2.0 mL Microcentrifuge tubes
• 8-strip PCR tubes
• 12-strip PCR tubes
• Individual PCR tubes 
• Any Magnetic Beads

Volumes

Minimum Volume 0.2 mL PCR Tube – 10 µL

Maximum Volume 0.2 mL PCR Tube – 0.2 mL

____________________________________________

Minimum Volume 1.5 mL Microcentrifuge Tube – .5 mL

Maximum Volume 1.5 mL Microcentrifuge Tube – 1.5 mL

Permagen’s 0.2 mL PCR / 1.5 mL Microcentrifuge tube separation rack is designed for labs with both PCR strip and 1.5 mL separation protocols. On the top, hold up to two of either 8 or 12 strips, or up to 24 individual tubes. Flip over and hold up to twelve 1.5 mL Microcentrifuge Tubes

Permagen’s  15 mL/ 50 mL Centrifuge Tube Magnetic Combo rack is designed for magnetic bead separations from up to three each, 15 mL or 50 mL Centrifuge tubes

Accommodates any common 15 mL Centrifuge Tubes and or 50 mL Centrifuge Tubes

Beads will be pulled to back wall allowing easy aspiration and tip tracking down the front wall of the tubes without disturbing bead pellet

Features include solid aluminum alloy design with hard coat finish for years of trouble-free use, rubber feet to help prevent slipping on work bench, less tippy than common plastic products, and fast separations using any magnetic beads

SKU #

MSR1550

Features

• Aluminum alloy design for years of trouble-free use
• Fast magnetic bead separations
• Held to tighter tolerances for more consistent results
• Pulls beads to side of wells for easy aspiration without disturbing bead pellet 
• Rubber feet to help prevent slippage
• Stable design
• Four magnets per tube 

Compatibility

• Up to three each of 15 mL and or 50 mL Centrifuge Tubes
• Any Magnetic Beads

Volumes

Maximum Volume – 50 mL (50 mL Tube)

Minimum Volume – 7 mL (15 mL Tube)

Permagen’s 15 mL/ 50 mL Centrifuge Tube Magnetic Combo rack is designed for magnetic bead separations from up to three each, 15 mL or 50 mL Centrifuge tubes

Overview

• Detection kits for NoV
• CE-IVD marked version available for in vitro diagnostic use
• Available in TaqMan format for analysis

Norovirus is a single-stranded, non-enveloped RNA virus belonging to the Caliciviridae family. Norovirus is considered the major causative agent of non-bacterial gastroenteritis in the world. The main channel of transmittance is via contaminated food or water, as well as human-to-human contact. Most Noroviruses infecting humans belong to genogroup I and II (particularly genotype 4). Norovirus is very stable in the environment and is resistant to some surface disinfectants such as alcohols and detergents. Moreover, it is very difficult to culture Norovirus in vitro, making its identification by standard microbiological assays challenging.

NoV TaqMan RT-PCR Kit, 100 reactions

• Ready to use format, including Master Mix for the target and PCR control to monitor for PCR inhibition and validate the quality
• Specific Primer and Probe mix for the pathogen/virus/viroid of interest
• Primer and Probe mix
• Positive and negative control to confirm the integrity of the kit reagents

NoV TaqMan RT-PCR Probe/Primer Set and Controls, 100 reactions

• Specific Primer/Probe mix and Positive Control for the pathogen/virus/viroid of interest
• Nuclease-free water
• Can be used together with Norgen’s RT-PCR Master Mix (#28113) or customer supplied master mix

Details

Supporting Data

Figure 1 / 3

Previous

Next

Click for expanded view

Storage Conditions and Product Stability
All kit components can be stored for 1 year after the date of production without showing any reduction in performance.

All kit components should be stored at -20°C upon arrival.