Human Papillomavirus (HPV) (High and Low Risk) TaqMan PCR Lyophilized Kits
Facebook
X
Pinterest
Email
Detail
Overview
Detection kits for HPV (High and Low Risk)
Lyophilized format designed for room temperature shipping
Available in TaqMan format for analysis
Norgen’s HPV (High and Low Risk) TaqMan PCR Lyophilized Kit is designed for the detection of HPV High and Low Risk specific DNA in a real-time PCR based on the use of TaqMan® technology. The lyophilized format is designed to ship the kit at ambient temperature.
Norgen’s HPV (High and Low Risk) TaqMan Lyophilized Probe/Primer and Control Set is designed for the detection of HPV High and Low Risk specific DNA in a real-time PCR based on the use of TaqMan® technology. The lyophilized format is designed to ship the kit at ambient temperature.
All kit components should be stored at -20°C upon arrival.
Once reconstituted, repeated thawing and freezing (>2 times) of the Master Mix and Positive Control should be avoided, as this may affect the performance of the assay. If the reagents are to be used only intermittently, they should be frozen in aliquots.
Each kit is provided with 4 tubes of 2X PCR Master Mix and each tube is enough to run 25 reactions. It is not necessary to reconstitute all Master Mix tubes at once. The Master Mix tubes can be reconstituted as and when needed.
All kit components can be stored for 2 years after the date of production without showing any reduction in performance.
Component
Cat. TM31550L (100 preps)
Cat. TM31510L (100 preps)
MDx TaqMan 2X PCR Master Mix (Lyo)
4 x 350 μL
–
Mycoplasma Primer & Probe Mix (Lyo)
280 μL
280 μL
Mycoplasma Positive Control (Lyo)
150 μL
150 μL
Nuclease-Free Water (Negative Control)
3 x 1.25 mL
1 x 1.25 mL
Product Insert
1
1
Other Products
IST-108 ThermASeal FoilTM Heat Sealing Film
Product Info
Document
Product Info
Overview
Heavy duty heat sealing foil which is peelable; suitable for long term storage and transportation.
Heat sealing offers a 100% effective method of plate sealing, for complete seal integrity, as well as being quick and cost effective
Our ThermASeal Heat Seal is a heavy duty laminate foil seal suitable for providing a very strong, but peelable seal
The seal is compatible with polypropylene plates to provide a high degree of sample protection
It demonstrates very good solvent resistance and can be used for very low temperature compound storage, in DMSO and organic solvents, and long term room temperature storage such that it is recommended as suitable for sample transportation
The seal can be pierced only by using a blade
The seal is available as sheets, for use with manual and semi-automated sealers, such as our HeatASeal 500 Sealing Machine
Also available in multiple roll formats compatible with specified automated heat sealers, such as our Wasp or Chameleon XT
Document
Heavy duty heat sealing foil which is peelable; suitable for long term storage and transportation.
Plasmid DNA is ready for various downstream applications including restriction digestion, bacterial transformation, sequencing and more
Available in 4 formats: MiniPrep, MiniPrep (Magnetic Bead System), 96-Well MiniPrep (Magnetic Bead System), and MaxiPrep
These kits are designed for the rapid preparation of plasmid DNA from Escherichia coli.
Plasmid MiniPrep Kit
This kit is designed for the rapid preparation of plasmid DNA from small cultures of Escherichia coli using convenient spin columns. The plasmid DNA is preferentially purified from other cellular components such as genomic DNA and RNA. This kit is able to purify plasmids up to 13,000 bp in size, and the typical purification yield is up to 20 μg from 1.5 mL of bacterial culture. Purified DNA is of excellent quality for transformation, restriction enzyme digestion, sequencing and more. Also available in a 96-well format.
Plasmid MiniPrep Kit (Magnetic Bead System and High Throughput Magnetic Bead System)
Norgen’s Plasmid MiniPrep Kit (Magnetic Bead System) is designed for the rapid preparation of plasmid DNA from small batch cultures of Escherichia coli. Norgen’s magnetic beads bind DNA under optimized salt concentrations and release the bound DNA under low salt and slightly alkali conditions. The plasmid DNA is preferentially purified from other cellular components such as genomic DNA and RNA. The purified plasmids are fully digestible with all restriction enzymes tested, and are completely compatible with real-time PCR and NGS.
Norgen’s Plasmid MiniPrep Kit (Magnetic Bead System) is also available in a 96-well (HT) format for high throughput applications. Purification with the 96-well plates can be integrated with a robotic automation system.
Plasmid MaxiPrep Kit
This kit is designed for the rapid spin column preparation of plasmid DNA from up to 100 mL of Escherichia coli cultures. The kit allows for the isolation of plasmid DNA with final endotoxin levels of 0.1 EU/µg of DNA or less. The kit is able to purify plasmids up to 13,000 bp in size, and typical yields from a 100 mL culture for a high copy number plasmid are between 0.4 and 1.0 mg. The purified DNA is fully digestible with all restriction enzymes tested, and is completely compatible with manual or automated sequencing to achieve 95-100% accuracy.
Storage Conditions and Product Stability All solutions should be kept tightly sealed and stored at room temperature. This kit is stable for 1 year from the date of shipment. The RNase should be stored at -20°C upon arrival. The Resuspension Solution A should be stored at 4°C upon addition of RNase enzyme.
Component
Cat. 13300 (50 preps)
Cat. 46400 (250 preps)
Cat. 46500 (4 preps)
Cat. 46600 (20 preps)
Cat. 60300 (50 preps)
Cat. 63000 (192 preps)
Resuspension Solution AZ
12 mL
60 mL
20 mL
100 mL
12 mL
2 x 20 mL
Lysis Buffer N
40 mL
80 mL
40 mL
2 x 80 mL
40 mL
2 x 40 mL
Buffer TN
20 mL
130 mL
55 mL
2 x 130 mL
20 mL
1 x 55 mL 1 x 20 mL
Wash Solution E
12 mL
2 x 18 mL
–
–
–
–
Elution Buffer K
8 mL
30 mL
–
–
8 mL
2 x 8 mL
Wash Solution J
–
–
25 mL
3 x 25 mL
–
–
Elution Buffer J
–
–
24 mL
120 mL
–
–
RNase A
1 vial
1 vial
1 vial
1 vial
1 vial
1 vial
Magnetic Bead Suspension
–
–
–
–
1 x 1.1 mL
4 x 1.1 mL
Spin Columns
50
250
–
–
–
–
Collection Tubes
50
250
–
–
–
–
DNA Maxi Spin Columns with Collection Tubes (Clear ring in column)
–
–
4
20
–
–
Maxi Spin Filter Columns with Collection Tubes (Grey ring in column)
The Flex caddy allows the Heater-Shaker GEN1 to be installed on the Opentrons Flex deck and sit below the deck, enabling below-deck cable routing and labware placed on top of modules to remain closer to the deck surface. The calibration adapter is used to calibrate the location of the Heater-Shaker. Caddies and calibration adapters are specific to the type of module.
Note: This item does not include the Heater-Shaker. The module is available with or without the Flex Caddy and Calibration tool: Heater-Shaker Module GEN1
Document
The Flex caddy allows the Heater-Shaker GEN1 to be installed on the Opentrons Flex deck and sit below the deck, enabling below-deck cable routing and labware placed on top of modules to remain closer to the deck surface. The calibration adapter is used to calibrate the location of the Heater-Shaker. Caddies and calibration adapters are specific to the type of module.
Note: This item does not include the Heater-Shaker. The module is available with or without the Flex Caddy and Calibration tool: Heater-Shaker Module GEN1
