resDNASEQ CHO Residual DNA Quantitation kit (Without DNA Control )

Permagen’s XLE PCR-96 low volume bar magnet plate for PCR applications features an individual bar magnet for each row of wells, making it the perfect solution for hand pipetting as all of the pelleted beads will be to the same side in each row. With its SBS footprint and integrated cushion base, scaling up to the robot is a snap. Available in kit form as well, which includes our X39602 top plate for 0.2 mL tubes & strips  

Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads

SKU #

A012424 (magnet plate only)

A012424KT (Includes top plate kit for 0.2 mL strips and tubes)

Features

• SBS/ SLAS footprint for automation
• Solid Aluminum alloy design
• Precision manufactured for more consistent results
• Fast magnetic bead separations
• Beads are pulled to tube walls on same side for easy pipetting
• Integrated cushion base allowing for accidental contact between tips and well bottoms
• Made in USA 
• For Research use only

Compatibility

• Full – Skirt PCR plates (manual or on liquid handler)
• Low Profile Semi-Skirt Plate 
• Semi- Skirted PCR plates (manual only*) 
• Non- Skirted PCR plates (manual only*)
• 0.2 mL PCR Strips and tubes  (with kit, manual or on liquid handler)
• Any magnetic beads
• Any common liquid handlers i.e. Tecan®, SPT Labtech, Opentrons®, Hamilton®, Agilent®, Beckman®, etc.

*only recommended for manual use as semi-, and non-skirted plates will not locate correctly into the nest but can be positioned against the magnet

Volumes

Minimum – 5 µL 

Maximum – 120 mL

Permagen’s XLE PCR-96 low volume bar magnet plate for PCR applications features an individual bar magnet for each row of wells, making it the perfect solution for hand pipetting as all of the pelleted beads will be to the same side in each row. With its SBS footprint and integrated cushion base, scaling up to the robot is a snap. Available in kit form as well, which includes our X39602 top plate for 0.2 mL tubes & strips

Overview

• Columns bind proteins of interest while endotoxins flow through
• Reduce endotoxin levels to less than 0.01 EU/µg of protein
• Proteins are desalted
• Greater than 95% protein recovery
• Concentrate protein samples and remove detergents at the same time
• Effectively remove a wide range of detergents including SDS, Triton® X-100, CHAPS, NP-40, and Tween 20
• Purification is based on spin column chromatography that uses Norgen’s resin separation matrix

The ProteoSpin™ Total Protein Concentration, Detergent Clean-Up and Endotoxin Removal Kits are designed for the rapid removal of endotoxins from previously purified proteins or peptides, with protein recoveries of > 95% being achieved. Endotoxins, also known as lipopolysaccharides, are cell-membrane components of Gram-negative bacteria such as E. coli. Endotoxins liberated by Gram-negative bacteria are frequent contaminations of protein solutions derived from bioprocesses. Due to the high toxicity of endotoxins in vivo and in vitro, their removal from protein preparations is often necessary prior to the use of the protein in downstream applications. These kits efficiently reduce endotoxin levels to ≤ 0.01 EU/mg of protein, using spin column chromatography based on Norgen’s proprietary resin as the separation matrix. These kits are highly efficient in removing many different salts commonly used in the laboratory including, but not limited to, MgCl₂, NaCl, KCl, CaCl₂, LiCl and CsCl. The purified protein samples can be used in a number of downstream applications including sequencing, cloning, and in vitro and in vivo introduction into cells and organisms for various purposes. The simultaneous removal of salts while concentrating a dilute protein solution makes the kit a convenient method for preparing proteins before running many downstream applications such as SDS-PAGE, isoelectric focusing, X-ray crystallography, NMR spectroscopy, mass spectroscopy and other applications.

Mini Kit

The ProteoSpin™ Total Protein Concentration, Detergent Clean-Up and Endotoxin Removal Mini Kit is designed for the rapid removal of endotoxins from up to 200 μg of previously purified proteins or peptides, with protein recoveries of > 95% being achieved.

Maxi Kit

The ProteoSpin™ Total Protein Concentration, Detergent Clean-Up and Endotoxin Removal Maxi Kit is designed for the rapid removal of endotoxins from up to 4 mg of previously purified proteins or peptides, with protein recoveries of > 95% being achieved.

Details

Supporting Data

Figure 1 / 15

Previous

Next

Click for expanded view

Kit Specifications
Maximum Protein Input	200 μg
Maximum Column Volume Input	600 μL
Molecular Weight of Recovered Proteins	No Molecular Weight cut-off
Final Endotoxin Levels	≤ 0.01 EU/μg protein
Protein Recovery	90-95%
% Detergent Removal	90-95%
Detergents that can be Removed	Including Triton® X-100, CHAPS, NP-40 and Tween 20
Minimum Elution Volume	50 μL
Time to Complete 10 Purifications	20 minutes

Storage Conditions
All solutions should be kept tightly sealed and stored at room temperature. This kit is stable for 2 years from the date of shipment.

Component	Cat. 22800 (25 preps)	Cat. 22200 (4 preps)
Binding Buffer J	8 mL	8 mL
Binding Buffer N	4 mL	20 mL
Wash Solution M	50 mL	130 mL
Wash Solution CIP	20 mL	60 mL
Wash Solution N	30 mL	130 mL
Wash Solution NIP	20 mL	60 mL
Elution Buffer G	6 mL	20 mL
Endotoxin Removal Solution	1.5 mL	1.5 mL
Protein Neutralizer EF	2 mL	2 mL
Maxi Spin Columns (assembled with Collection Tubes)	–	4
Mini Spin Columns	25	–
Collection Tubes	25	–
Maxi Spin Columns (assembled with Collection Tubes)	4
Elution Tubes (1.7 mL)	25	–
Elution Tubes (50 mL)	4	–
Product Insert	1	1

Overview

• Free of all DNases, RNases and nucleic acids
• Prepared without the use of DEPC
• Room temperature storage

Norgen’s Nuclease-Free Water is free of all DNases, RNases and nucleic acids and is suitable for all molecular biology applications requiring nuclease-free water including PCR, RT-PCR and real-time PCR.  Our water is prepared without the use of DEPC, and is ready to use without further treatment.

Available Sizes

• 4 x 1.25 mL
• 100 x 1.25 mL
• 100 mL
• 500 mL
• 1000 mL

Details

Applications
For use in any molecular biology application

Storage Conditions
This kit is stable for 2 years after the date of shipment.

Precautions and Disclaimers
This product is designed for research purposes only.  It is not intended for human or diagnostic use.