Opentrons OT-2 Tips, 1000µL. Optimized for volumes 100µL to 1000µL Clear Tips, Polypropylene. These tips are DNAse/RNAse, pyrogen and protease free – they are sterilized from ebeam irradiation. Not autoclavable.
Compatible with: Opentrons Single-Channel GEN1 P1000 Electronic Pipettes, Opentrons Single-Channel GEN2 P1000 Electronic Pipettes
Opentrons OT-2 Tips, 1000µL. Optimized for volumes 100µL to 1000µL Clear Tips, Polypropylene. These tips are DNAse/RNAse, pyrogen and protease free – they are sterilized from ebeam irradiation. Not autoclavable.
Compatible with: Opentrons Single-Channel GEN1 P1000 Electronic Pipettes, Opentrons Single-Channel GEN2 P1000 Electronic Pipettes
Description
The PM1600 ExcelBand™ All Blue Regular Range Plus Protein Marker is a blue protein standard with 11 pre-stained proteins covering a wide range of molecular weights from 10 to 180 kDa in Tris-Glycine buffer (9 to 170 kDa in Bis-Tris (MOPS) buffer and Bis-Tris (MES) buffer). Proteins are covalently coupled with a blue chromophore, and two reference bands (at 25 kDa and 72 kDa, respectively) are enhanced in intensity when separated on SDS-PAGE (Tris-Glycine buffer).
The PM1600 ExcelBand™ All Blue Regular Range Plus Protein Marker is designed for monitoring protein separation during SDS-polyacrylamide gel electrophoresis, verification of Western transfer efficiency on membranes (PVDF, nylon, or nitrocellulose) and for approximating the size of proteins.
Features
Contents
Approximately 0.1~0.5 mg/ml of each protein in the buffer (20 mM Tris-phosphate (pH 7.5 at 25°C), 2% SDS, 0.2 mM DTT, 3.6 M urea, and 15% (v/v) glycerol).
Quality Control
Under suggested conditions, PM1600 ExcelBand™ All Blue Regular Range Plus Protein Marker resolves 11 major bands in 15% SDS-PAGE (Tris-Glycine buffer, MOPS, and MES buffer) and after Western blotting to nitrocellulose membrane.
Storage
4°C for 3 months
-20°C for long term storage
The PM1600 ExcelBand™ All Blue Regular Range Plus Protein Marker is a blue protein standard with 11 pre-stained proteins covering a wide range of molecular weights from 10 to 180 kDa in Tris-Glycine buffer (9 to 170 kDa in Bis-Tris (MOPS) buffer and Bis-Tris (MES) buffer). Proteins are covalently coupled with a blue chromophore, and two reference bands (at 25 kDa and 72 kDa, respectively) are enhanced in intensity when separated on SDS-PAGE (Tris-Glycine buffer).
The PM1600 ExcelBand™ All Blue Regular Range Plus Protein Marker is designed for monitoring protein separation during SDS-polyacrylamide gel electrophoresis, verification of Western transfer efficiency on membranes (PVDF, nylon, or nitrocellulose) and for approximating the size of proteins.
SKU: CB024
Permagen’s SBS/ANSI footprint 24-Tube thermal block allows the use of up to twenty four 1.5 mL -2 mL Microcentrifuge tubes, or screw-cap vials for keeping sample temperatures consistent. Can be used for heating as well
Permagen’s SBS/ANSI footprint 24-Tube thermal block allows the use of up to twenty four 1.5 mL -2 mL Microcentrifuge tubes, or screw-cap vials for keeping sample temperatures consistent. Can be used for heating as well
Usages:
For the rapid detection and of coliforms and E. coli.
Principle:
Peptone and yeast extract powder provides carbon and nitrogen sources and trace elements; sodium chloride maintains osmotic equilibrium; agar as medium coagulant; dodecyl sulfate inhibit Gram-positive bacteria; chromogenic substrate were mixed occurrence of coliforms and E. coli enzyme corresponding specific reactions, hydrolysis of the substrate, the release of the color groups, in a pale yellow plates coliforms appears orange-red colonies while E.coli appears blue-green colonies.
Formulation (per liter):
Peptone 15.0g
Yeast extract powder 3.0g
Sodium chloride: 5.0g
Sodium lauryl sulfate: 0.1g
Agar: 12.0g
Mixed chromogenic substrate: 6.77g
Final pH 7.0 ± 0.2
How to use:
1. Weigh 41.9g of the product, adding , 1.0 L of distilled or deionized water, heated to boiling stir until completely dissolved, dispensing into flask, 115 autoclaved 10minutes.
2, Take 25.0g or 25.0mL of sample with sterile procedures, added to the flask containing 225.0mL of sterile phosphate buffered saline (or saline) ,shaken thoroughly homogenized with a homogenizer or a 1:10 dilution of 1min solution, diluted 1:10 and then continue to select the appropriate serial dilutions of three, the two plates inoculated with each dilution, poured dissolved by heating and cooled to about 45 medium.
3, observe the results.
Quality control:
This product appears light yellow after pouring on plate, these strains were inoculated after 36 ± 1 18 ~ 24h culture growth in the following table.
Bacteria name bacteria NO. growth situation feature
Escherichia coli ATCC25922 good blue-green colonies
Citrobacter ATCC8090 good orange-red colonies
Salmonella typhimurium CMCC50115 good colorless colonies
Enterococcus faecalis ATCC29212 suppressed —–
Storage: Store in a dark, cool and dry place, tighten the caps immediately after use. Storage period of two years.
1000mL
