
An adapter for Cerillo’s Alto plate reader. This adapter allows the Alto plate reader to fit perfectly on the deck of the Opentrons Flex or OT-2 to allow for pipetting directly into the reader.
An adapter for Cerillo’s Alto plate reader. This adapter allows the Alto plate reader to fit perfectly on the deck of the Opentrons Flex or OT-2 to allow for pipetting directly into the reader.

An adapter for Cerillo’s Alto plate reader. This adapter allows the Alto plate reader to fit perfectly on the deck of the Opentrons Flex or OT-2 to allow for pipetting directly into the reader.
Features:
Large capacity water capture freeze dryer
Tabletop medium-sized freeze dryer
Suitable for drying medium-sized samples
Apply to drying in laboratories such as cosmetics, fermentation broth, soil, materials, etc.
product description:
9kg-12kgs water capture capacity, which can meet the needs of laboratories with large freeze-drying requirements for water capture capacity
-70°C/-90°C ultra-low temperature cold trap, which can capture lower temperature organic solvents
Unique refrigeration technology, the cooling time of the cold trap from the start of the low-temperature refrigeration system to the target value is ≤3 minutes
Direct-capture large coil cold trap, higher efficiency, better ice capture effect
Hemispherical cold trap bottom surface is more conducive to the discharge of condensed water
The cold trap and condenser coil are all Teflon anti-corrosion treatment, which can freeze-dry a large amount of ultra-low temperature organic solvents
One-click hot gas defrost, with defrost compressor protection program.
Large flat flange silicone seal, permanently no need to apply any auxiliary sealing silicone grease
High-precision ultra-wide width detection, vacuum sensor with full-range automatic temperature compensation, making vacuum display more accurate
The cavity vacuum can be read and controlled accurately, and the vacuum control accuracy is ≤0.1mbar
Removable sample shelf with dedicated holes for centrifuge tube placement, making placement and height adjustment easier
Configuration of various types of chambers and T-frames can fully satisfy users’ sample placement
Optional configuration of eutectic point detection system and data export system.
The vacuum pump and sample placement chamber can be combined at will according to user needs, making the configuration more flexible and convenient
Techinical parameter
9-12L Floor tabletop and floor standing one for lab usage
| Tabletop | BD1-9 | BD2-9 | BD1-12 | BD2-12 |
| Floor standing | BH1-9 | BH2-9 | BH1-12 | BH2-12 |
| Water Capture capacity | 9L | 12L | ||
| Cold trap temperature | -70 C | -90℃ | -70C° | -90℃ |
| Cold trap volume | 15L | 20L | ||
| Freeze dried chamber | High permeability organic glass/multi manifold external valve/stainless steel chamber | |||
| Sample shelf | Stainless steel φ 260mm/485mm. 3-10 layers/optional●Electric heating/manual capping/optional | |||
| Vacuum pump | Extreme vacuum 4 * 10-4mbar, pumping capacity ≥ 200L/can be equipped with various types of pumps | |||
| Oil mist filter | Standard configuration | |||
| Vacuum pump connection pipe | Single forming stainless steel flexible pipe DN16 ISO-KF L-1.5m | |||
| anti-corrosive treatment | Cold trap, condensing coil/all equipped with PTFE anti-corrosion treatment as standard. Freeze-drying organic solvents | |||
| External valve | 1-48 ports/optional | |||
| Eutectic point judgment | Support/Optional | |||
| Data audit trail | Support/Optional | |||
| Power | 0.9kw | 1.5kw | 1kw | 1.6KW |
| Size | 390*468*448mm | 480*498*487mm | ||
This kit provides a convenient and rapid method to isolate total DNA from fresh, frozen and preserved stool samples, including those preserved using Norgen’s Stool Nucleic Acid Collection and Preservation Devices Dx (Cat. Dx45660). The universal protocol conveniently allows for the isolation of total genomic DNA from all the various microorganisms and host cells found in the stool sample simultaneously. The kit removes all traces of humic acids and other inhibitors using Bead Tubes and a combination of chemical and physical homogenization and lysis, without the need of any phenol-chloroform extractions. A simple and rapid spin column procedure is then used to further purify the DNA with high yields and molecular weights of up to 50 kb plus. The purified DNA is of the highest quality and is fully compatible with all downstream applications such as PCR, qPCR, NGS and microarrays since all humic acid substances and other PCR inhibitors are removed during the isolation process.
NOTE: This product is not available for sale in the United States.
Figure 1 / 4
Click for expanded view
| Kit Specifications | |
| Maximum Stool Input | 200 mg (fresh/frozen stool) or 400 μL (preserved stool) |
| Type of Stool Processed | Frozen, fresh or preserved stool |
| Format | Spin Column |
| Maximum Column Binding Capacity | 50 μg |
| Maximum Column Loading Volume | 650 μL |
| Elution Volume | 50 μL |
| Time to Complete 10 Purifications | 30 minutes |
| Applications | PCR, qPCR, Southern Blot Analysis, Sequencing, Microarray Analysis. |
Storage Conditions and Product Stability
All solutions should be kept tightly sealed and stored at room temperature. This kit is stable for 2 years after the date of shipment.
| Component | Cat. Dx27600 (50 preps) |
|---|---|
| Lysis Solution | 60 mL |
| Lysis Additive | 6 mL |
| Binding Solution | 7 mL |
| Wash Solution I | 30 mL |
| Wash Solution II | 22 mL |
| Elution Buffer | 3 mL x 2 |
| Bead Tube | 50 |
| Mini Spin Columns | 50 |
| Collection Tubes | 50 |
| Elution Tubes (1.7 mL) | 50 |
| Product Insert | 1 |
029040 Methyl Red Reagent
Usage:For Methyl Red Test.
Specification:10ml
10ml