Usages: For selective isolation of Gram-negative bacteria, especially for Shigella and Salmonella.
Principle: Yeast extract powder provide nitrogen, vitamins, growth factors; sodium chloride to maintain osmotic equilibrium ferric ammonium citrate of iron salts to produce a black iron sulfide; agar as medium coagulant; phenol red as pH indicator.
Formulation（per liter）: Xylose 3.50g L-Lysine 5.00g Lactose 7.50g Sucrose 7.50 g Sodium Chloride 5.00 g Yeast Extract 3.00g Sodium Desoxycholate 2.50g Sodium Thiosulphate 6.80g Fe-Ammonium Citrate 0.80g Phenol Red 0.08g Agar 13.50 Final PH 7.4±0.2
How to use: 1.Suspend 55.2g in 1Lof distilled or deionized water. Heat with frequent agitation and boil to completely dissolve the powder. Do not autoclave ,cool to 50℃ and pour into sterile petri dishes. 2.Dilluted and treated samples.
Quality control: Quality control strains were inoculated ,and cultured at 36 ± 1 ℃ for 24h ,results show as follows: strain name strain code growth feature Arizona bacteria CMCC (B) 47001 good black colonies Salmonella typhimurium CMCC (B) 50115 good black colonies Streptococcus faecalis CMCC32223 prohibited —
Storage: Store in a dark, cool and dry place, tighten the cap immediately after use. Storage period of three years.
Specifications: 250g/bottle
Other Products
ProteoSpin™ Total Protein Concentration, Detergent Clean-Up and Endotoxin Removal Kits
Product Info
Document
Product Info
Overview
Columns bind proteins of interest while endotoxins flow through
Reduce endotoxin levels to less than 0.01 EU/µg of protein
Proteins are desalted
Greater than 95% protein recovery
Concentrate protein samples and remove detergents at the same time
Effectively remove a wide range of detergents including SDS, Triton® X-100, CHAPS, NP-40, and Tween 20
Purification is based on spin column chromatography that uses Norgen’s resin separation matrix
The ProteoSpin™ Total Protein Concentration, Detergent Clean-Up and Endotoxin Removal Kits are designed for the rapid removal of endotoxins from previously purified proteins or peptides, with protein recoveries of > 95% being achieved. Endotoxins, also known as lipopolysaccharides, are cell-membrane components of Gram-negative bacteria such as E. coli. Endotoxins liberated by Gram-negative bacteria are frequent contaminations of protein solutions derived from bioprocesses. Due to the high toxicity of endotoxins in vivo and in vitro, their removal from protein preparations is often necessary prior to the use of the protein in downstream applications. These kits efficiently reduce endotoxin levels to ≤ 0.01 EU/mg of protein, using spin column chromatography based on Norgen’s proprietary resin as the separation matrix. These kits are highly efficient in removing many different salts commonly used in the laboratory including, but not limited to, MgCl2, NaCl, KCl, CaCl2, LiCl and CsCl. The purified protein samples can be used in a number of downstream applications including sequencing, cloning, and in vitro and in vivo introduction into cells and organisms for various purposes. The simultaneous removal of salts while concentrating a dilute protein solution makes the kit a convenient method for preparing proteins before running many downstream applications such as SDS-PAGE, isoelectric focusing, X-ray crystallography, NMR spectroscopy, mass spectroscopy and other applications.
Mini Kit
The ProteoSpin™ Total Protein Concentration, Detergent Clean-Up and Endotoxin Removal Mini Kit is designed for the rapid removal of endotoxins from up to 200 μg of previously purified proteins or peptides, with protein recoveries of > 95% being achieved.
Maxi Kit
The ProteoSpin™ Total Protein Concentration, Detergent Clean-Up and Endotoxin Removal Maxi Kit is designed for the rapid removal of endotoxins from up to 4 mg of previously purified proteins or peptides, with protein recoveries of > 95% being achieved.
Including Triton® X-100, CHAPS, NP-40 and Tween 20
Elution Volume
2-4 mL
Time to Complete 10 Purifications
30-40 minutes
Storage Conditions All solutions should be kept tightly sealed and stored at room temperature. This kit is stable for 2 years after the date of shipment.
Component
Cat. 22800 (25 preps)
Cat. 22200 (4 preps)
Binding Buffer J
8 mL
8 mL
Binding Buffer N
4 mL
20 mL
Wash Solution M
50 mL
130 mL
Wash Solution CIP
20 mL
60 mL
Wash Solution N
30 mL
130 mL
Wash Solution NIP
20 mL
60 mL
Elution Buffer G
6 mL
20 mL
Endotoxin Removal Solution
1.5 mL
1.5 mL
Protein Neutralizer EF
2 mL
2 mL
Maxi Spin Columns (assembled with Collection Tubes)
–
4
Mini Spin Columns
25
–
Collection Tubes
25
–
Maxi Spin Columns (assembled with Collection Tubes)
m-PEG6-DBCO is a monodisperse PEG reagents which can enable copper-free Click Chemistry through the reaction of DBCO with azide. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.
Document
m-PEG6-DBCO is a monodisperse PEG reagents which can enable copper-free Click Chemistry through the reaction of DBCO with azide. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.
DBCO-NHCO-PEG5-NHS ester is a PEG linker containing NHS ester that is able to react specifically and efficiently with primary amines such as the side chain of lysine residues or aminosilane-coated surfaces at neutral or slightly basic condition to form a covalent bond. The hydrophilic PEG spacer arm improves water solubility and can also provide a long and flexible connection that minimizes steric hindrance during ligation. DBCO is commonly used for copper-free Click Chemistry reactions. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.
Document
DBCO-NHCO-PEG5-NHS ester is a PEG linker containing NHS ester that is able to react specifically and efficiently with primary amines such as the side chain of lysine residues or aminosilane-coated surfaces at neutral or slightly basic condition to form a covalent bond. The hydrophilic PEG spacer arm improves water solubility and can also provide a long and flexible connection that minimizes steric hindrance during ligation. DBCO is commonly used for copper-free Click Chemistry reactions. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.
