100 bp DNA Ladder in 2% of agarose gel.
• For sizing and quantification of double strand DNA fragments.
• Composed of nine bands as shown on right.
• The 500-bp band with higher concentration is easily distinguishable from the others.
• Premixed with 6X DNA loading buffer for direct gel loading.
100 bp DNA Ladder in 2% of agarose gel.
• For sizing and quantification of double strand DNA fragments.
• Composed of nine bands as shown on right.
• The 500-bp band with higher concentration is easily distinguishable from the others.
• Premixed with 6X DNA loading buffer for direct gel loading.
K-LMALAF
SKU: 700004312
245.5 mL of prepared reagent (e.g. 1116 assays of 0.22 mL)
| Content: | 245.5 mL of prepared reagent (e.g. 1116 assays of 0.22 mL) |
| Shipping Temperature: | Ambient |
| Storage Temperature: | Short term stability: 2-8oC, Long term stability: See individual component labels |
| Stability: | > 2 years under recommended storage conditions |
| Analyte: | L-Malic Acid |
| Assay Format: | Auto-analyser |
| Detection Method: | Absorbance |
| Wavelength (nm): | 340 |
| Signal Response: | Increase |
| Linear Range: | up to 80 μg/mL of L-malic acid in final reaction solution |
| Limit of Detection: | 20 mg/L |
| Reaction Time (min): | ~ 3 min |
| Application examples: | Wine, beer, fruit juices, soft drinks, candies, fruit and vegetables, bread, cosmetics, pharmaceuticals and other materials (e.g. biological cultures, samples, etc.). |
| Method recognition: | Methods based on this principle have been accepted by AOAC, EEC, EN, NF, NEN, DIN, GOST, OIV, IFU, AIJN, NBN, ISO and MEBAK |
The L-Malic Acid (Analyser Format) test kit is an analyser format for the specific measurement and analysis of L-malic acid (L-malate) in beverages and food products. On calibration, the prepared reagent is linear to > 80 micrograms of L-malic acid per mL of assay solution.
View more assay kits on our organic acid list.
Advantages
The L-Malic Acid (Analyser Format) test kit is an analyser format for the specific measurement and analysis of L-malic acid (L-malate) in beverages and food products. On calibration, the prepared reagent is linear to > 80 micrograms of L-malic acid per mL of assay solution.
These kits provide a rapid method for the isolation and purification of total DNA from a wide range of plant and fungal species. Total DNA, including genomic DNA, mitochondrial DNA and chloroplast DNA can be purified from fresh or frozen plant tissues, plant cells or fungi samples using this kit. Purified DNA samples can be used for the detection of viral pathogens, as viral DNA is isolated with the plant/fungi DNA. The purified DNA is of the highest integrity, and can be used in a number of downstream applications including PCR, qPCR, SNP, Southern blotting and sequencing.
Plant/Fungi DNA Isolation Kit (Spin Column)
Complete 10 purifications in 45 minutes. This kit offers a maximum loading volume of 650 μL per column, and a maximum binding capacity of 50 μg per column.
Plant/Fungi DNA Isolation 96-Well Kit (High Throughput)
For high throughput applications. Purification with the 96-well plates can be integrated with a robotic automation system. Complete 96 purifications in 50 minutes. This kit offers a maximum loading volume of 500 μL per well, and a maximum binding capacity of 50 μg per well.
Plant/Fungi DNA Isolation Kit (Magnetic Bead System)
The DNA is bound to the surface of the magnetic beads under optimized buffer conditions and released using a low salt buffer system. The Plant DNA Isolation Kit (Magnetic Bead System) can be easily adapted to automated magnetic bead separation instruments and work stations.
Plant/Fungi DNA Isolation 96-Well Kit (High Throughput Magnetic Bead System)
For high throughput applications. Purification with the 96-well plates can be integrated with a robotic automation system.
Figure 1 / 7
Click for expanded view
| Kit Specifications – Spin Column | |
| Column Binding Capacity | 50 μg |
| Maximum Column Loading Volume | 650 μL |
| Maximum Amount of Starting Material:Plant TissuesFungi (wet weight) | 100 mg 100 mg |
| Average Yields* 50 mg Tomato Leaves 50 mg Grape Leaves 50 mg Peach Leaves 50 mg Plum Leaves 50 mg Pine Needles Botrytis cinerea (50 mg wet weight) Fusarium sp. (50 mg wet weight) Aspergillus niger (50 mg wet weight) | 18 µg 10 µg 10 µg 10 µg 5 µg 1.5 µg 2 µg 4 µg |
| Time to Complete 10 Purifications | 45 minutes |
* Average yields will vary depending upon a number of factors including species, growth conditions used and developmental stage.
* Average yields will vary depending upon a number of factors including species, growth conditions used and developmental stage.
Storage Conditions and Product Stability
All solutions should be kept tightly sealed and stored at room temperature, except for the RNAse which should be stored at -20°C. This kit is stable for 1 year after the date of shipment.
Select Plants and Fungi that can be used with the Plant/Fungi DNA Purification Kits
| Plants | Plants (Cont’d) | Fungi |
| Tomato | Turnip | Aspergillus niger |
| Grape | Chinese Cabbage | Mucor racemosus |
| Peach | Radish | Cladosporium cladosporioides |
| Plum | Komatsuna | Fusarium oxysporum |
| Pine Needles | Apricot | Penicillium sp. |
| Raspberry | Sweet Potato | Botrytis cinerea (Botryotinia fuckeliana) |
| Strawberry | Hydrangea | Pichia sp. |
| Legumes | Fig | Rhizopus oryzae |
| Prosopis cineraria (Ghaf) | Turf | Alternaria tenuissima |
| Sorghum grass | Cherry | Fusarium sp. |
| Tobacco | Saintpaulia | |
| Arabidopsis | Lotus | |
| Lichen | Carrot | |
| Corn seed | Hansen | |
| Sunflower seed | Pistachio | |
| Olive seed | ||
| Soybean seed |
| Component | Cat. 26200 (50 preps) | Cat. 26250 (250 preps) | Cat. 26900 (192 preps) | Cat. 58200 (50 preps) | Cat. 62400 (192 preps) |
|---|---|---|---|---|---|
| Lysis Buffer L | 30 mL | 1 x 30 mL 2 x 60 mL | 2 x 60 mL | 60 mL | 2 x 60 mL |
| Binding Buffer I | 7 mL | 1 x 7 mL 1 x 25 mL | 25 mL | 7 mL | 25 mL |
| Solution WN | 18 mL | 1 x 18 mL 1 x 55 mL | 55 mL | 18 mL | 55 mL |
| Wash Solution A | 38 mL | 2 x 38 mL | 2 x 38 mL | – | – |
| Elution Buffer B | 15 mL | 30 mL | 30 mL | 8 mL | 30 mL |
| RNAse A | 1 vial (80 μL) | 5 vials (5 x 80 μL) | 1 vial | 1 vial | 1 vial |
| Magnetic Bead Suspension | – | – | – | 4 x 1.1 mL | 2 x 8.5 mL |
| Filter Columns | 50 | 250 | – | – | – |
| Spin Columns | 50 | 250 | – | – | – |
| Collection Tubes | 100 | 500 | – | – | – |
| 96-Well Plate | – | – | 2 | – | 2 |
| 96-Well Collection Plate | – | – | 2 | – | – |
| Adhesive Tape | – | – | 4 | – | 2 |
| Elution Tubes (1.7 mL) | 50 | 250 | – | 50 | – |
| 96-Well Elution Plate | – | – | 2 | – | 2 |
| Product Insert | 1 | 1 | 1 | 1 | 1 |
83, On-nut 88/2 Prawet Sub-district, Prawet District, Bangkok, 10250, Thailand
Tel : 081-875-1869 , 02-328-7179
Email : hej@a3p-scientific.com
Copyright © 2024 A3P Scientific Co., Ltd. All rights reserved. Web by Mountain Studio
Privacy Policy | Terms of Use | Site Map
