Description

Nucleic acid testing (NAT) is the method of choice for detection and quantification of a wide range of micro organisms. Primerdesign manufactures and supplies high quality quantitative real-time PCR kits for the detection and simultaneous quantification of numerous significant pathogens . A copy number standard curve is provided for quantification and an the internal extraction template (DNA or RNA), controls for the quality of the nucleic acid extraction and eliminates false negative results.

The kit is designed with the broadest possible detection profile to ensure that all clinically relevant strains and subtypes are detected. Target sequences are selected by working with data from key opinion leaders in the field. Multiple sequence alignments and unprecedented real-time PCR expertise in design and validation ensure the best possible kit. Details of the target and priming specificity are included in the individual handbooks above.

Packaged, optimised and ready to use. Expect Better Data.

Primer and probe mix (150 reactions)
Reverse Transcription, target specific primers (RNA genome viruses only)
Copy number standard curve (sufficient for multiple standard curves)
Internal extraction control – Read through VIC channel*
Endogenous control (150 tests)
RNAse/DNAse free water
*alternative fluorophores available on request

Introduction

HiPure HP Plant RNA Mini Kit combines guanidine isothiocyanate lysing and silica gel membrane purification technology to simplify total RNA extraction. Ultracentrifugation in CsCl purification and LiCl / ethanol precipitation are not required. The kit uses DNase digestion to completely remove DNA. It is suitable for extracting up to 100μg of total RNA (including miRNA) from plant samples less than 200mg. Several samples can be extracted within 40 minutes. The purified RNA can be directly used for RT-PCR, fluorescent quantitative RT-PCR, Northern hybridization, second generation sequencing, etc.

Details

Specifications

Features	Specifications
Main Functions	Isolation total RNA (include miRNA)  from <200mg difficult-to-extract plant samples (use low toxicity chloroform substitutes)
Applications	RT-PCR, qPCR, Northern hybridization, second generation sequencing, nucleic acid protection, in vitro translation
Purification method	Mini spin column
Purification technology	Silica technology
Process method	Manual (centrifugation or vacuum)
Sample type	Hard-to-extraction plant samples such as fruit and seed, grape leaves, tea
Sample amount	≤200 mg
Elution volume	≥30μl
Time per run	1-24 samples within 30 minutes
Liquid carrying volume per column	800µl
Binding yield of column	100µg

Principle

This kit uses glass fiber filter membrane purification technique, and only requires simple combination-washing-elution steps. The sample is lysed and homogenized in the solution containing guanidine salt, ethanol is added to provide appropriate binding conditions, and transferred to the purification column for centrifugation. Up to 100µg of RNA can be selectively bound to the membrane, pollutants are efficiently washed off after three times of washing, and finally the purified RNA is eluted by RNase Free Water.

Advantages

• Completely remove DNA by using of DNase
• High quality – one-step RNA extraction reagent combined with silica gel column can obtain the highest concentration
• Fast – several samples can be extracted in 40 minutes by column method
• Sensitive – RNA can be recovered at the level of PG
• Broad spectrum – various types of plant samples can be processed by diversity of operating procedures

Kit Contents

Contents	R416502	D416503
Purification Times	50 Preps	250 Preps
HiPure RNA Mini Columns	50	250
2ml Collection Tubes	100	250
DNase I	600 μl	5 x 600 μl
DNase Buffer	6 ml	30 ml
Buffer PAL	60 ml	270 ml
Buffer GXP2*	20 ml	100 ml
Buffer BDP	60 ml	270 ml
Buffer RW1	50 ml	250 ml
Buffer RW2*	20 ml	2 x 50 ml
RNase Free Water	10 ml	30 ml

Storage and Stability

DNase I should be stored at -20-8°C upon arrival. The remaining kit components can be stored at room temperature (15-25°C) and are stable for at least 18 months under these conditions. The entire kit can be stored at 2-8°C, but in this case buffers should be redissolved before use. Make sure that all buffers are at room temperature when used.

Purchase Guide

1. When dealing with woody or uncommon samples, R4150 is recommended first. R4150 contains two polysaccharide/polyphenol lysis buffer, which is the most universal product.

2. R4151 is recommended for handling common economic crop samples for the first time. Strong lysis solution can be used to process easy-extraction samples. The amount of corn or rice leaves samples can reach up to 300mg.

3. R4165 adopts CTAB/chloroform method, which can also handle a large number of difficult-to-extraction plants, but requires contact with chloroform substitutes, which is less safe than other kits. This kit uses DNase Ⅰ to remove DNA, which is also a good choice for extracting polysaccharide/polyphenol-rich plant samples.

4. R4014 is recommended for fruit/starch plant samples, which uses improved trizol pre-treatment, single column operation and is more economical.

Select the right purification kit to get impactful results：

Ⅰ. Purchase guide of Magen kits based on sample

Ⅱ. Cross purchase guide for Magen kits vs Other brands

For any customized product or OEM service, please contact us.

HiPure HP Plant RNA Mini Kit combines guanidine isothiocyanate lysing and silica gel membrane purification technology to simplify total RNA extraction. Ultracentrifugation in CsCl purification and LiCl / ethanol precipitation are not required. The kit uses DNase digestion to completely remove DNA. It is suitable for extracting up to 100μg of total RNA (including miRNA) from plant samples less than 200mg. Several samples can be extracted within 40 minutes. The purified RNA can be directly used for RT-PCR, fluorescent quantitative RT-PCR, Northern hybridization, second generation sequencing, etc.

Compact and stylish designed, the BioShake iQ high-end thermoshaker lets you perform all your standard mixing runs with a minimum of adjustments.
The BioShake iQ offers outstanding performance to handle a wide range of applications across biotechnology, pharmaceutical and academic research.

Small. Light. Efficient. Quiet.

• For microplates, tubes and glass vials
• Fast & high-precision heating
• Temperature range: ambient to 99°C
• Precise mixing from 200 – 3,000 rpm
• Wide range of thermo adapters
• Stylish aluminium housing

---

ADVANCED TECHNOLOGY

Save time.

By combining the mixing operation with the incubation phase, reaction process times and operator workload are reduced and efficiency of many procedures is increased, resulting in a higher throughput.

The first-class finished aluminium housing gives the BioShake iQ its essential functionality. It provides a high amount of security, device stability and ensures a long service life.

GENTLE MIXING OF SAMPLES

By planar orbital motion

German designed and manufactured, BioShake iQ thermoshaker offer an ultra-efficient, 2-dimensional shaking axis so that samples mix completely in a fraction of the time of competing systems.

The mixing orbit of 2.0 mm is always constant. The orbital shaking is precisely controlled, in fact, that you need never spin down your plates after mixing. Even tubes, vials, high density plates, or low sample volumes, offer no obstacle for these precision tools.

Fully adjustable between 200 rpm and 3,000 rpm, well beyond the speeds of most other brands, guarantees fast, splatter-free, mixing for tubes, glass vials or across an entire 384-well microplate.

HOMOGENEOUS HEATING

Using large-area heating source in combination with digital sensor electronic

The BioShake iQ heats from ambient to 99°C in a short time, provides ease of use features, amazing comfort and maximum safety.

Within the BioShake iQ thinnest large-area heating elements and sensors are integrated. During the heat up time the special electronic control system guarantees the same temperature for all vessels with minimal deviations.
Temperatures are selectable from ambient temperature to 99°C in steps of 1.0°C. The nominal regulation accuracy is better than ±0.1°C with a uniformity of temperature distribution better than ±0.5°C at 45°C across the heating surface.

Exchangeable thermo adapter plates and thermal blocks enable a perfect adaptation to microplates, tubes or glass vials.

UNIVERSAL SPRING CLAMPS

Suitable for all microplates

In the corners eight spring clamps are inserted for easy fixation of skirted microplates and deep well plates in SBS format 127.7 x 85.5 mm without an attached adapter. These spring clamps lock the microplate quickly and safely, even at the highest mixing frequencies.

For flexible and deformable PCR plates we recommend using of the related PCR adapter.

Fast mixing processes with frequent plate changes can be performed in the routine as easy and safe.

COMFORT

Simple intuitive operation and programming

The BioShake iQ is operated from the front face of the enclosure which includes touch buttons and a display. 

Special buttons for start, stop and storage of time and mixing modes enable the instrument to run complex applications. This opens new points of view on the daily laboratory work and optimizes routine application enormously.

The short mix button allows short and fast mixing in between.

The two line LCD display guarantees simultaneous and safe reading of all programmed and measured parameters as time, mixing frequency and temperature.

EXCHANGABLE THERMO ADAPTERS

For a wide range of applications

The BioShake iQ comes with a variety of standardized and specific adapter plates. The replacement of the adapters are very simple.

Perfect shaped adapters allow an optimal fit for standard tubes, lysis tubes, microplates, glass vials and other sample vessels. An excellent temperature uniformity and homogeneity is guaranteed for all samples.

UNIQUE DESIGN MEETS HIGH-END TECHNOLOGY

First-class finished aluminium housing

Unique and efficient design combined with the most compact housing result in beautiful and well-defined laboratory equipment. Therefore, the first-class finished aluminium housing gives the BioShake iQ its essential functionality. It provides a high amount of security, device stability and ensures a long service life.

Safety of the user and ease of use are clearly a priority.

MADE IN GERMANY

High-end instruments for daily routine

A perfectly harmonious blend of high-tech and handmade. “Made in Germany” has always been a recipe for success for QInstruments. 100% of QInstruments production takes place in Germany.

The focus is on human diligence and on being environmentally friendly. The company upholds its quality guarantee by means of consistent quality management. For more than 15 years these lab automation professionals from Jena have used only high-quality materials to ensure sustainable production, applied innovative thinking and undertaken research in a future-oriented way – all as a matter of course.

For microplates, tubes and glass vials
Fast & high-precision heating
Temperature range: ambient to 99°C
Precise mixing from 200 – 3,000 rpm
Wide range of thermo adapters
Stylish aluminium housing