Introduction

This product provides fast and easy methods for purification of total DNA for reliable PCR and Southern blotting. Total DNA(e.g., genomic, viral, mitochondrial) can be purified from small volume of blood, tissue and dry blood spots.

Details

Specifications

Features	Specifications
Main Functions	Isolation total DNA from 1-10μl blood, <10mg tissue, urine, blood stain, seminal stain
Applications	PCR, southern bolt and virus detection, etc.
Purification method	Mini spin column
Purification technology	Silica technology
Process method	Manual (centrifugation or vacuum)
Sample type	Animal tissues, blood stain, urine, seminal stain and various forensic samples
Sample amount	Blood:1-100μl, Tissue:<10mg
Elution volume
Time per run
Liquid carrying volume per column
Binding yield of column

Principle

This product is based on silica Column purification. The sample is lysed and digested with lysate and protease, DNA is released into the lysate. Transfer to an adsorption column. Nucleic acid is adsorbed on the membrane, while protein is not adsorbed and is removed with filtration. After washing proteins and other impurities, nucleic acid was finally eluted with low-salt buffer (10mmTris, pH9.0, 0.5mm EDTA).

Advantages

• Fast – several samples can be extracted in 20 minutes (after digestion)
• High purity – purified DNA can be directly used in various downstream applications
• High recovery – DNA can be recovered at the level of PG
• Good repeatability – silica technology can obtain ideal results every time

Kit Contents

Contents	D312502	D312503
Purification Times	50 Preps	250 Preps
Buffer ATL	15 ml	60 ml
Buffer AL	15 ml	60 ml
Buffer GW1*	22 ml	66 ml
Buffer GW2*	20 ml	2 x 50 ml
Carrier RNA	310 μg	2 x 310 µg
Proteinase K	24 mg	120 mg
Protease Dissolve Buffer	1.8 ml	10 ml
Buffer AE	15 ml	60 ml
HiPure DNA Mini Columns I	50	2 x 125
2 ml Collection Tubes	100	5 x 100

Storage and Stability

Carrier RNA and Proteinase K should be stored at 2–8°C upon arrival. However, short-term storage (up to 12 weeks) at room temperature (15–25°C) does not affect its performance. The remaining kit components can be stored dry at room temperature (15–25°C) and are stable for at least 18 months under theseconditions.

Experiment Data

This product provides fast and easy methods for purification of total DNA for reliable PCR and Southern blotting. Total DNA(e.g., genomic, viral, mitochondrial) can be purified from small volume of blood, tissue and dry blood spots.

Overview

• AAV Purification from any input – cell fraction or media fraction
• High AAV recovery, up to 90%
• No specialized equipment needed
• Purification from a variety of AAV serotypes (including AAV6 and AAV9)
• Yields highly active AAV for in vivo and in vitro experiments
• Purification is based on spin column chromatography that uses Norgen’s resin separation matrix

Recombinant adeno-associated virus (AAV) vectors are highly promising tools for both in vitro and in vivo gene transfer. Norgen’s AAV Purification Kits provide fast and simple procedures for concentrating and purifying AAV vectors from cell lysate and cell culture media. Purification is based on precipitation onto Norgen Biotek’s proprietary resin. Contaminating cellular debris is largely removed from the sample via a centrifugation step, while contaminating DNA and RNA is reduced using enzymatic digestion. AAV vector purified in this manner is highly active for use in in vitro and in vivo transduction experiments.

AAV Purification Kit

Norgen’s AAV Purification Kit contains sufficient materials for 15 preparations (33.5 mL per prep of supernatant (SN) or a total of 500 mL of supernatant input). Approximately 1 mL of cell pellet can be purified per prep, up to a maximum of 15 mL of cell pellet in total for the entire kit. Up to 33X sample concentration.

AAV Purification Mini Kit

Each spin column is able to concentrate and purify AAV from 0.5-8 mL of cell pellet, cell culture media, or cells and culture media mixed together. Up to 50X sample concentration. AAV vector purified in this manner is highly active for use in in vitro transduction experiments, and is eluted into a small volume (200 µL). Preparation time for 4 samples is 1.5 hours, with 45 minutes of hands-on time.

AAV Purification Midi Kit

Each spin column is able to concentrate and purify AAV from 8 mL up to 45 mL of input consisting of cell pellet, cell culture media, or cells and culture media mixed together. Up to 50X sample concentration. AAV vector purified in this manner is highly active for use in in vitro transduction experiments, and is eluted into a small volume (1 mL). The kit may be used to purify up to 8 x 25 mL or 4 x 45 mL of samples using the included columns. Preparation time for 4 samples is approximately 2 to 2.5 hours, with 1.5 hours of hands on time.

AAV Purification Maxi Kit (Slurry Format)

Each spin column is able to concentrate and purify AAV from 45 mL to 90 mL of input consisting of cell pellet, cell culture media, or cells and culture media mixed together. Up to 200X sample concentration. AAV vector purified in this manner is highly active for use in in vitro transduction experiments, and is eluted into a small volume (1-10 mL) using the optional concentration step. The kit may be used to purify up to 1 x 900 mL samples or 10 x 45-90 mL samples using the included columns. Preparation time for 1 x 900 mL sample is approximately 2.5 to 3.5 hours, with an optional concentration step requiring an additional 30 min.

Details

Supporting Data

Figure 1 / 10

Previous

Next

Click for expanded view

Kit Specifications
Column Binding Capacity	At least 5 x 109 AAV particles as determined by qPCR
AAV Vector Serotype	Any
Average Recovery	> 80%
Input Type	Cells, media, or mixed
Input Volume	0.5 mL – 8 mL
Minimum Elution Volume	200 µL
Time to Complete Purifications	1 – 2 hours

 
Storage Conditions and Product Stability
DNAse I and RNAse A should be stored at -20°C upon arrival. Elution Buffer O should be stored tightly capped at 4°C upon arrival. All other solutions should be kept tightly sealed and stored at room temperature. Once opened, the solutions should be stored at 4°C. This kit is stable for 1 year after the date of shipment.

Component	Cat. 66100 (15 preps)	Cat. 63200 (20 preps)	Cat. 63300 (4-8 preps)	Cat. 63250 (1-10 preps)
Lysis Buffer S	5.5 mL	5.5 mL	5.5 mL	20 mL
DNAse I	–	2 x 25 uL	2 x 25 uL	210 μL
RNAse A	–	60 μL	60 μL	240 μL
HL-SAN Nuclease	102 μL	–	–	–
Binding Buffer A	20 mL	4 mL	4 mL	2 x 8 mL
Purification Solution C	60 mL	–	–	–
Purification Solution D	130 mL	–	–	–
Wash Solution C	2 x 130 mL	60 mL	60 mL	3 x 60 mL
Slurry E	12.5 mL	–	–	2 x 14.5 mL
Elution Buffer O	66 mL	8.5 mL	8.5 mL	66 mL
Protein Neutralizer	4 mL	4 mL	4 mL	4 mL
Spin Columns	–	20	–	–
Mini Spin Columns	–	20	–	–
Midi Spin Columns (grey contents) with Collection Tubes	–	–	8	10
Midi Spin Columns (white contents) with Collection Tubes	–	–	8	–
Maxi Spin Columns (grey contents) with Collection Tubes	–	–	–	10
Maxi Spin Columns (white contents) with Collection Tubes	–	–	–	10
Collection Tubes	–	40	–	–
Elution tubes (1.7 mL)	50	20	–	–
Midi Elution tubes (15 mL)	–	–	8	10
Maxi Elution tubes (50 mL)	–	–	–	10
Product Insert	1	1	1	1