This product provide fast and easy methods for purification of total DNA from whole blood, plasma, serum, buffy coat, bone marrow, other body fluids, lymphocytes, cultured cells. There is no need to use toxic phenol chloroform extraction or time-consuming alcohol precipitation. The extraction process finish in 40 minutes. Purified DNA includes genomic DNA, mitochondrial DNA, viral DNA (e.g. HBV), or DNA from other parasitic microorganisms. The obtained DNA can be directly used in PCR, viral DNA detection and other experiments.
Detail
Introduction
This product provide fast and easy methods for purification of total DNA from whole blood, plasma, serum, buffy coat, bone marrow, other body fluids, lymphocytes, cultured cells. There is no need to use toxic phenol chloroform extraction or time-consuming alcohol precipitation. The extraction process finish in 40 minutes. Purified DNA includes genomic DNA, mitochondrial DNA, viral DNA (e.g. HBV), or DNA from other parasitic microorganisms. The obtained DNA can be directly used in PCR, viral DNA detection and other experiments.
This kit can use on manual protocol or 16/32/48 channel automated extraction system. No need to pause for the addition of binding solution (not applicable to 96/192 instruments)
Details
Kit Contents
Contents
D631001C
D631002C
D631003C
Purification Times
48
96
480
MagPure Particles
1.7 ml
3.5 ml
16 ml
Proteinase K
24 mg
50 mg
220 mg
Protease Dissolve Buffer
1.8 ml
3 ml
15 ml
Buffer MLA
30 ml
70 ml
300 ml
Buffer DW1
30 ml
70 ml
300 ml
Buffer EW
60 ml
120 ml
2 x 300 ml
Buffer MWX1
30 ml
70 ml
300 ml
Elution Buffer
10 ml
20 ml
60 ml
Prefilled Kit Contents
Product
Contents and volume
D6310-TL-06C
D6310-S-48
Proteinase K
50 mg
24 mg
Protease Dissolve Buffer
3 ml
1.8 ml
TL-Tip
12 pcs
24 pcs
Tip bottom plate/ Tip base reagent strip
Row 1/7：600μl Buffer MLA
6 plates
48 strips
Row 2/8：600μl Buffer MWX1
Row 3/9：600μl Buffer DW1
Row 4/10：30μl MagPure Particles 600μl Buffer EW
Row 5/11：600μl Buffer EW
Row 6/12：100μl Elution Buffer
Storage and Stability
Proteinase K Powder should be stored at 2–8°C upon arrival. However, short-term storage (up to 12 weeks) at room temperature (15–25°C) does not affect their performance. The remaining kit components can be stored at room temperature (15–25°C) and are stable for at least 18 months under these condition.
Other Products
BCS CleanSeq Beads
Product Info
Document
Product Info
Introduction
A rapid, high performance dye-terminator removal process based on the paramagnetic bead technology. The paramagnetic bead format requires no centrifugation or filtration and is easily performedmanually or fully automated for high throughput dye-terminator removal. Compared to similar systems, this product produces sequences with longer Phred 20 read lengths and higher signal intensities than any other purification technology.
Details
Specifications
Features
Specifications
Main Functions
Removal of free fluorescent dye from sequencingsolution (Replace Beckmen or agencourt CleanSeq)
Applications
Automated sequences
Purification technology
Magnetic beads technology
Process method
Manual or automatic
Sample type
DNA doped with fluorescentdye
Sample amount
5μl
Recovery
90%
Elution volume
≥25μl
Operation time
≤50 minutes
Principle
The CleanSeq method contains magnetic particles in an optimized binding buffer to selectively capture sequencing extension products. The protocol can be performed directly in the thermal cycling plate. Unincorporated dyes, nucleotides, salts and contaminants are removed using a simple washing procedure. The purification procedure is amenable to a variety of automation platforms since it requires no centrifugation or vacuum filtration.
Advantages
High recovery – up to 90%
High throughput – using magnetic beads purification technology
CleanSeq Beads should be stored at 2-8°C upon arrival and is stable up to 6 months under the condition. However, short-term storage (up to 12 weeks) at room temperature (15-25°C) does not affect its performance. Mix CleanSeq Beads well before using. The reagent should appear homogenous and consistent in color.
DO NOT FREEZE.
Document
A rapid, high performance dye-terminator removal process based on the paramagnetic bead technology. The paramagnetic bead format requires no centrifugation or filtration and is easily performedmanually or fully automated for high throughput dye-terminator removal. Compared to similar systems, this product produces sequences with longer Phred 20 read lengths and higher signal intensities than any other purification technology.
Features of the resDNASEQ CHO Residual DNA Quantitation kit include:
Simpler and Rapid
Only three steps will be need for Sample Preparation and All components of the Sample Preparation Kit can be stored at room temperature.
Only one Reagent for qPCR;
Only 1.5 hours will be needed for the whole test.
Accurate
Perfect amplification curve, good amplification efficiency and good precision.
Highly sensitive quantitation using proven TaqMan™ real-time qPCR technology.
Limit of Detection (LOD): 0.01 fg/μL; Limit of Quantification (LOQ): 0.3 fg/μL.
The recovery rate of different concentration samples in the linear range is between 70% and 130%.
Kit Performance
Fig 1. Only three steps will be need for Sample Preparation and only 20 minitutes will be taken for Sample Preparation.
Fig 2. Seven concentration samples of 0.3fg/μL, 3fg/μL, 30fg/μL, 300fg/μL, 3pg/μL, 30pg/μL, 300pg/μL were detected. CV of each concentration was < 30%, Regression coefficient associated with standard solutions was 0.99992, and amplification efficiency was 100.370%.
Fig 3. Five concentration samples of 0.1 fg/μL, 0.3 fg/μL, 0.5 fg/μL, 1 fg/μL and 3 fg/μL were detected, and 10 multiple wells were detected for each concentration. The CV of concentrati on values of samples with 0.3 fg/μL and above concentrations were less than 30%.
Fig 4. DNA recovery can be determined by including samples spiked with known DNA amounts which are prepared from the corresponding DNA standards. Typically, the range for this value varies from 70% to 130%.
Fig 5. Only one Reagent for qPCR MIX.
Document
Note: Price not include shipment & duty, contact us to get full quote. The resDNASEQ CHO Residual DNA Quantitation kit is designed for the quantification of residual DNA from CHO, in cell lines which are used for production of biopharmaceutical products. The Ducky Bio residual DNA CHO Assay, based on proven real-time qPCR technology, makes testing of residual DNA from the Chinese hamster ovary (CHO) cell line rapid, specifc. The PCR-based assay is sensitive and specific for DNA from the CHO cell line and not subject to detection of human or environmental DNA that might be introduced during sample handling. The kit was developed to meet the sensitivity requirements defined by WHO (10 ng CHO DNA per therapeutic dose).
Our Blyscan™ Glycosaminoglycan Kit has been a ‘go-to’ Solution for reliable sGAG and Proteoglycan Analysis for many years! Blyscan utilises a dye-binding approach to quantitatively measure sulfated glycosaminoglycans (sGAG) and proteoglycans in cells, tissues and fluids from a wide range of in-vivo and in-vitro sources.
Colorimetric Detection (656nm) (Endpoint)
Understanding Glycosaminoglycans (GAGs) and Proteoglycans
Glycosaminoglycans (GAGs) are a type of negatively charged polysaccharide that play crucial roles in various biological processes. They are composed of repeated disaccharide units, typically of N-acetylated or N-sulfated hexosamine paired with a uronic acid (GlcA or IdoA) or galactose. Sulfate groups can also be added to give sulfated GAGs an overall negative charge that influences cell interactions and also enable binding by our Blyscan dye reagent.
Common examples of GAGs include Chondroitin Sulfate, Dermatan Sulfate, Heparin, Heparan Sulfate, and Keratan Sulfate. Note that Hyaluronic Acid is a non-sulfated GAG and cannot be detected by the Blyscan assay. If you need to measure hyaluronic acid instead, we recommend using our Purple-Jelley kit!
The Role of Glycosaminoglycans in Tissues
GAGs and proteoglycans have essential functions in tissues and organisms, providing biophysical support through scaffolding and maintaining cartilage hydration. They also play a vital role in biochemical processes such as cell adhesion and signalling.
What is the origin of the Blyscan assay name?
Blyscan is an Old English word meaning ‘to shine’ and from which the word ‘blush’, (blushing), may have been derived. This was an appropriate choice as the Blyscan Assay contains a blue dye which ‘blushes’ bright pink when it binds to sulphated glycosaminoglycans!
How does the Blyscan assay work?
Step 1. Blyscan dye reagent contains DMMB dye in an optimised buffer. Addition of Dye reagent to samples containing sGAG results in the formation of a dye/sGAG complex due to a charge interaction between dye and GAG sulfate groups.
Step 2. Over a 30 minute incubation Dye-labelled sGAGs precipitate out of solution and are collected by centrifugation. Following removal of unbound dye, the remaining bound dye is released from the complex by addition of dye dissociation reagent. Released dye is quantified spectrophotometrically.
Step 3. The sGAG content of unknown samples may be quantified by comparison against a calibration curve prepared using a standard of purified Chondroitin-4-sulfate supplied with the kit.
A list of suggested sample types can be found under the ‘Assay Specification‘ tab.
The Blyscan Dye reagent is formulated to miminise binding to other charged sample components such as nucleic acids, a problem with some older dye-based sGAG assays.
Assay range
2.5 – 50µg/ml
Limit of Detection
2.5µg/ml
Detection Method
Colorimetric Detection (656nm) (Endpoint)
Measurements per kit
110 in total (allows a maximum of 48 samples to be run in duplicate alongside a standard curve).
In-vivo: Liquid samples, including fluids such as urine, amniotic or synovial fluid.
In-vitro: Solid samples, such as deposited ECM on 2D/3D culture surfaces.by enzymatic treatment
In-vivo: Liquid samples, Culture media during 2D/3D cell culture.
The assay requires that sulfated polysaccahrides or sGAGs are in a soluble form. A preliminary enzymatic extraction step is required for solid samples (enzyme not supplied with kit).
The assay is not suitable for use with samples containing alginates or that comprise degraded sulfated disaccharide fragments.
Precautions
This kit is designed for research use only. Not for use in diagnostic procedures. Kit requires access to a centrifuge, as well as a spectrophotometer/colorimeter capable of absorbance detection at 656nm. Specific sample preparation protocols may require customer to provide further reagents, consult assay manual for further information.
Blyscan sGAG kit contents:
1. Blyscan Dye Reagent (1x110ml)
2.sGAG Reference Standard (1x5ml, 100µg/ml Bovine tracheal chondroitin 4-sulfate)
3. Dissociation Reagent (1x110ml)
4. Sodium Nitrite (1x15ml)
5. Acetic Acid (1x15ml)
6. Ammonium Sulfamate (1x15ml)
7. 1.5ml micro-centrifuge tubes for dye-labelling reaction.
8. Assay kit manual
NB: Additional reagents may be required for sample preparation prior to assay. Consult manual or contact us for further details.
Document
Our Blyscan™ Glycosaminoglycan Kit has been a ‘go-to’ Solution for reliable sGAG and Proteoglycan Analysis for many years! Blyscan utilises a dye-binding approach to quantitatively measure sulfated glycosaminoglycans (sGAG) and proteoglycans in cells, tissues and fluids from a wide range of in-vivo and in-vitro sources. Colorimetric Detection (656nm) (Endpoin
