DBCO-PEG9-amine is a PEG linker which contains DBCO and amine moieties. The DBCO group is commonly used in copper-free Click Chemistry reactions. The amine group is reactive with carboxylic acids, activated NHS esters, carbonyls (ketone, aldehyde) etc. The hydrophilic PEG spacer increases the water solubility of the compound. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.
DBCO-PEG9-amine is a PEG linker which contains DBCO and amine moieties. The DBCO group is commonly used in copper-free Click Chemistry reactions. The amine group is reactive with carboxylic acids, activated NHS esters, carbonyls (ketone, aldehyde) etc. The hydrophilic PEG spacer increases the water solubility of the compound. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.
Sample type purification kit guide
The 16S V2-V3 Library Preparation Kit for Illumina consists of the reagents and components required for library preparation of the 16S V2-V3 amplicon libraries to be used for next-generation sequencing on Illumina platforms. All molecular reagents including primers, enzyme mixes, indexes, and buffers are provided. Instructions for PCR clean up with the AMPure XP Magnetic Beads (supplied by customer) are also included for rapid purification of nucleic acid products generated at two steps of the workflow. The library prep workflow could be used for purified DNA inputs from different sources including stool, soil, water, saliva, plant, urine, skin swab, vaginal swab, cheek swab, nasal swab, plasma/serum, tongue swab, gum swab, and others.
The 16S V2-V3 Library Preparation Kit for Illumina has a streamlined procedure that reduces the handling time such that the library prep procedure can be completed in approximately 4 hours (see diagram below). Input DNA is first subjected to targeted PCR to amplify the V2-V3 region of the DNA encoding 16S rRNA. The post-PCR reaction is then cleaned up using AMPure XP beads. Dual index primers are then added using a limited-cycle PCR. The indexed amplicons flanked by 5′ and 3′ barcoded adaptors are then cleaned using AMPure XP beads. The libraries are then ready for quantification, pooling and sequencing.
Figure 1 / 3
Click for expanded view
| Minimum amount of starting material: | 2.5 µL of DNA (5 ng/µL) |
| Time to complete library preparation: | 4 hours |
Storage Conditions and Product Stability
Norgen’s 16S V2-V3 Library Prep Kit for Illumina is shipped as one kit box (for the 24 prep kit) or two sub-component kits (for the 96 prep kit). All kits should be stored at -20°C upon arrival.
All kit components should remain stable for at least 1 year when stored at the specified storage conditions.
| Step | Component | Cat. 70300 (24 preps) | Cat. 70310, 70320, 70330, 70340 (96 preps) |
|---|---|---|---|
| Amplicon PCR (PCR 1) | MGX Master Mix | 330 µL | 1,320 µL |
| 16S V2-V3 Primer Mix | 70 µL | 280 µL | |
| Index PCR (PCR 2) | Indexing Master Mix | 660 µL | 2 x 1,320 µL |
| N7xx Index Primer | 50 µL | 50 µL | |
| S5xx Index Primer | 70 µL | 70 µL | |
| PCR Clean-Up | Resuspension Buffer | 2 x 1,250 µL | 2 x 5,000 µL |
| Nuclease-free water | 1,250 µL | 1 x 6,000 µL |
Mycoplasma is the smallest and simplest prokaryotic organism. There is a risk of mycoplasma contamination during cell culture, and mycoplasma contamination of cells has become a common problem worldwide.
Mycoplasma contamination may seriously affect the state of cells, change the gene expression and metabolic characteristics of cells, lead to slow cell growth, abnormal differentiation and death, and seriously affect cell function.
Bacteria, yeast or mold contamination in cell culture can be seen under an optical microscope, but mycoplasma contamination is usually not visible under an optical microscope and must be detected by specific detection methods.
Common methods for detecting mycoplasma contamination include mycoplasma isolation and culture, special biochemical tests such as ELISA and luminescence, and DNA fluorescent staining detection. Among the above detection methods, most of the operation steps are relatively cumbersome, the sensitivity is not high, the mycoplasma types cannot be distinguished, special instruments are required, or the time required is long. The qPCR method is relatively simple and convenient to operate, and the results can be obtained in 2 hours.
• Provide results in less than 2 hours.
Good negative and positive controls.
• No live mycoplasma required: The MycoSEQ Mycoplasma Detection Kit does not contain any live mycoplasma and does not require the use of live mycoplasma for validation
• Can be used with gDNA, inactivated mycoplasma, or live mycoplasma
• Can be used as an alternative to the standard 28-day culture test
• Can be used in conjunction with culture-based methods to provide preliminary results while awaiting the 28-day test results
The MycoSEQ Plus Mycoplasma Detection Kit is part of an integrated workflow for adventitious drug, impurity, and contaminant detection during biopharmaceutical manufacturing. The entire workflow includes the sample preparation kit, which provides a manual sample preparation method, which together with the qPCR analysis can provide results in 2 hours. (Please note that complex matrices may require additional upfront processing steps as described in the various available protocols.)
• Mycoplasma qPCR MIX, store at -15°C to -25°C, store at 2°C to 8°C after first use, protected from light.
• Mycoplasma Positive Control, -15°C to -25°C.
• Mycoplasma Negative Control, store at -15°C to -25°C, store at 2°C to 8°C after first use.
Note: Price not include shipment & duty, contact us to get full quote.
DuckyBio’s Mycoplasma PCR Detection Kit is a TaqMan™-based quantitative PCR (qPCR) kit for detecting mycoplasma contamination in biological materials such as cultured cells. Designed and tested using criteria often applied toward rapid mycoplasma detection in biotherapeutic manufacturing cell culture lot release, the MycoSEQ Plus kit enables results that meet or exceed guidance on sensitivity and specificity expectations as described in European Pharmacopoeia (E.P. 2.6.7, 2007), US Pharmacopoeia (US63) and Japanese Pharmacopoeia. When used with a suitable sample preparation method, the MycoSEQ Plus kit can detect less than 5 CFU/mL.
K-CARREZ
SKU: 700004270
40-1000 assays per kit (depending on application)
| Content: | 40-1000 assays per kit (depending on application) |
| Shipping Temperature: | Ambient |
| Storage Temperature: | Short term stability: Ambient, Long term stability: See individual component labels |
| Stability: | > 2 years under recommended storage conditions |
| Reaction Time (min): | ~ 15 min |
| pH Range: | 7.5-8 (recommended) |
| Application examples: | Dairy samples including milk, cream, whey protein, cheese, yoghurt and infant formula. Other foodstuffs such as meat, fish may also be possible. |
The Carrez Clarification Kit provides easy and ready to use reagents for the removal of interfering compounds such as proteins and fats from samples, allowing improved handling and more accurate measurement of target analytes such as carbohydrates and alcohols.
This product is intended to be used as an accessory kit to the K-LOLAC, K-LACTUL, K-LACGAR, K-LATE, K-DLATE and K-FRHYD assay kits. It may also be suitable for other assay methods where sample clarification is required to remove fats or proteins before sample determination steps.
Note: this method is unsuitable for sample preparation prior to the determination of ascorbic acid (vitamin C), citrate and urea/ammonia.
Advantages
The Carrez Clarification Kit provides easy and ready to use reagents for the removal of interfering compounds such as proteins and fats from samples, allowing improved handling and more accurate measurement of target analytes such as carbohydrates and alcohols.
