endo-BCN-PEG3-NHS ester

Overview

Peelable heat sealing foil which is suitable for low temperature storage, high temperature uses and PCR.

• Heat sealing offers a 100% effective method of plate sealing, for complete seal integrity, as well as being quick and cost effective
• Our PeelASeal Foil is a laminate seal compatible with polypropylene plates
• It can be removed from polypropylene plates by peeling, even with a plate which has been removed directly from -80 °C storage
• PeelASeal Foil forms a complete seal to a plate enabling very low temperature uses, including very low temperature storage, and high temperature uses, such as PCR (when used with a pressurized heated lid)
• The seal demonstrates moderate solvent resistance and can be utilized for short term compound storage at room temperature
• The seal is available as sheets, for use with manual and semi-automated sealers, such as our HeatASeal 500 Sealing Machine
• Also available in multiple roll formats compatible with specified automated heat sealers, such as our Wasp or Chameleon XT

Peelable heat sealing foil which is suitable for low temperature storage, high temperature uses and PCR.

Introduction

Intended Usage:
For cultivating fastidious bacteria.

Principle:
Tryptone, peptone, and yeast extract multivalent powder provides a nitrogen source, vitamins, and growth factors; sodium chloride to maintain osmotic balance; glucose carbon source; dipotassium hydrogen phosphate as a buffering agent.

Formulation（per liter）:
Tryptose 20.0g
Glucose 2.0g
Dipotassium hydrogen phosphate 2.5g
Sodium chloride 5.0g
Final pH 7.3±0.2

How to use：

Suspend 29.5g in 1L of purified water. Heat with frequent agitation to dissolve the powder.
Sterilize at 121℃ for 15 minutes

Storage:

Keep the container tightly closed. Store in a cool, dry place, away from bright light. The storage period is 3 years.

Specification: 500g/bottle

Related products

500g

Description 

Q-PAGE™ Bis-Tris Precast Gel is a high-performance and easy to use precast polyacrylamide gel for electrophoresis in Bis-Tris buffer system (MOPS or MES). The optimized gel formula allows Q-PAGE™ Bis-Tris Precast Gel to show improved resolution, accurate results, and an extended shelf-life over conventional Laemmli Tris-HCl gels. 

Q-PAGE™ Bis-Tris Precast Gels are available in gradient (4 to 12%) and fixed (8% and 12%) concentrations of polyacrylamide in 12-and 15-well formats. Two available cassette sizes, Mini (10 x 8.3 cm) and Midi (10 x 10 cm), are compatible with most popular protein electrophoresis systems. Q-PAGE™ Mini (QP2XXX) Gels are suitable for Bio-Rad® and other systems. Q-PAGE™ Midi (QP3XXX) Gels are suitable for Invitrogen® XCell SureLock® Mini-Cell, Invitrogen® Mini Gel Tank, Hoefer SE260, and other systems.

Key Features

• User-friendly gel cassette:
  • Numbered and framed wells for sample loading
  • With cassette opener for easy use
• Enhanced gel performance:
  • Enhanced band sharpness
  • Better resolution of small proteins
  • Stable for shipping at ambient temperature
• Easy compatibility: 
  • Available as homogeneous and adjusted gradient gels for a wide range of protein separation.
  • Compatible with most popular protein electrophoresis systems 

Storage and stability

Store Q-PAGE™ Precast Gels at 4°C for periods up to 12 months.

Do not freeze Q-PAGE™ Precast Gels Remove tape and comb before electrophoresis. 

Keep Q-PAGE™ Precast Gels flat during storage.

Q-PAGE™ Bis-Tris Precast Gel is a high-performance and easy to use precast polyacrylamide gel for electrophoresis in Bis-Tris buffer system (MOPS or MES). The optimized gel formula allows Q-PAGE™ Bis-Tris Precast Gel to show improved resolution, accurate results, and an extended shelf-life over conventional Laemmli Tris-HCl gels.

Q-PAGE™ Bis-Tris Precast Gels are available in gradient (4 to 12%) and fixed (8% and 12%) concentrations of polyacrylamide in 12-and 15-well formats. Two available cassette sizes, Mini (10 x 8.3 cm) and Midi (10 x 10 cm), are compatible with most popular protein electrophoresis systems. Q-PAGE™ Mini (QP2XXX) Gels are suitable for Bio-Rad® and other systems. Q-PAGE™ Midi (QP3XXX) Gels are suitable for Invitrogen® XCell SureLock® Mini-Cell, Invitrogen® Mini Gel Tank, Hoefer SE260, and other systems.