Precise reproducible results
Time saving through completing multiple tests in one go
Cost saving through a reduced price compared with buying four kits separately
Exceptional value for money
Supplied lyophilised – no cold chain shipping
Nucleic acid testing (NAT) is the method of choice for detection and quantification of a wide range of micro organisms. Primerdesign manufactures and supplies high quality quantitative real-time PCR kits for the detection of numerous significant pathogens. The genesigPLEX range provides the most efficient method of detecting DNA and RNA by combining multiple assays into a single tube. This principle of multiplexing represents state of the art PCR testing and is a key feature of the high-throughput testing conducted by laboratories around the world. These assays include process controls to verify the quality of the nucleic acid extraction and eliminate false negative results.
The kit is designed with the broadest possible detection profile to ensure that all clinically relevant strains and subtypes are detected. Target sequences are selected by working with data from key opinion leaders in the field. Multiple sequence alignments and unprecedented real-time PCR expertise in design and validation ensure the best possible kit.
Details of the target and priming specificity are included in the handbook.
Packaged, optimised and ready to use. Expect Better Data.
This product is suitable for rapid extraction of DNA from plant and fungal samples. The kit is based on silica gel column purification technology. The whole extraction process only takes 60-90 minutes. DNA can be used directly for PCR, quantitative PCR, southern Blot, test of virus DNA and so on.
Details
Specifications
Features
Specifications
Main Functions
Isolation total DNA from 50mg simple plant using 96 well bind plate
Plantmaterial is first mechanically disrupted and then lysed by addition of lysis buffer and incubation. RNase A in the lysis buffer digests the RNA in the sample. After lysis, proteins and polysaccharides are salt-precipitated. Binding buffer and ethanol are added to the cleared lysate to promote binding of the DNA to the HiPure membrane. The sample is then applied to a column and then centrifuged. DNA binds to the membrane, while contaminants such as proteins and polysaccharides are efficiently removed by 2 wash steps. Pure DNA is eluted in a small volume of low-salt buffer or water.
Advantages
High quality DNA – meet a variety of downstream applications, including PCR, qPCR, enzyme digestion, blot hybridization, etc.
High throughput – 96 samples can be processed simultaneously by 96 well plate
High permeability – using composite membrane technology, no hole plugging
Kit Contents
Contents
D316702
D316703
Purification Times
4 x 96 Preps
20 x 96 Preps
RNase Solution
5 ml
22 ml
Elution Buffer
120 ml
500 ml
Buffer SPL
200 ml
2 x 500 ml
Buffer PS
100 ml
400 ml
Buffer GW1
220 ml
5 x 220 ml
Buffer GW2
100 ml
3 x 100 ml
1.6ml Collection Plate
4
20
HiPure gDNA Plate
4
20
2.2ml Collection Plate(DW Plate)
8
40
0.8ml Collection Plate(DW Plate)
4
20
Sealing Film
20
100
Storage and Stability
RNase solution should be stored at 2-8°C upon arrival. However, short-term storage (up to 24 weeks) at room temperature (15-25°C) does not affect its performance. The remaining kit components can be stored dry at room temperature (15-25°C) and are stable for at least 18 months under these conditions.
This product is suitable for rapid extraction of DNA from plant and fungal samples. The kit is based on silica gel column purification technology. The whole extraction process only takes 60-90 minutes. DNA can be used directly for PCR, quantitative PCR, southern Blot, test of virus DNA and so on.
EXTRAClean Urine Exosome Purification and RNA Isolation Kits
Product Info
Document
Product Info
Overview
Ensure optimal results for sensitive applications like NGS
Up to a tenfold increase in microRNA mapping during sequencing runs to reduce costs
Purification and enrichment of intact urinary exosomes for functional studies.
Bind and elute all RNA irrespective of size or GC content, without bias.
Isolate all sizes of RNA, including microRNA, irrespective of size or GC content, without bias.
No phenol extractions, Proteinase K treatment, nor carrier RNA required.
No time-consuming ultracentrifugation, filtration nor special syringes are required.
No precipitation reagents nor overnight incubation required.
Compatible with urine from any species.
Pure exosomes are purified and are free-from any other RNA-binding proteins.
Purification is based on EXTRAClean spin column chromatography that uses Norgen’s proprietary resin separation matrix.
Norgen’s EXTRAClean Urine Exosome Purification and RNA Isolation Mini Kit constitutes an all-in-one system for the purification of exosomes and the subsequent isolation of RNA from different urine sample volumes ranging from 250 μL to 1 mL. The purification is based on spin column chromatography that employs Norgen’s proprietary resin. The EXTRAClean columns undergo stringent processing and rigorous quality control measures to minimize contamination traces, ensuring optimal results for sensitive applications such as NGS. The kit is designed to isolate all sizes of RNA, including microRNA. The kit provides a clear advantage over other available kits in that it does not require any special instrumentation, protein precipitation reagents, extension tubes, phenol/chloroform or protease treatments. Moreover, the kit allows the user to elute into a flexible elution volume ranging from 50 μL to 100 μL. The purified RNA is free from any protein-bound circulating RNA and of the highest integrity. The purified RNA can be used in a number of downstream applications including real time PCR, reverse transcription PCR, NGS application, Northern blotting, RNase protection and primer extension, and expression array assays.
All sizes, including miRNA and small RNA (< 200 nt)
Elution Volume
50-100 μL
Time to Complete 10 Purifications
35-40 minutes
Average Yields
Variable depending on specimen
Storage Conditions and Product Stability All buffers should be kept tightly sealed and stored at room temperature. This kit is stable for 2 years after the date of shipment. It is recommended to warm Lysis Buffer A for 20 minutes at 60°C if any salt precipitation is observed.