Introduction

This product provides high quality purification of total DNA from whole blood, plasma, serum, buffy coat, or other body fluids, lymphocytes and cultured cells. There is no need to use toxic phenol chloroform extraction or time-consuming alcohol precipitation. The extraction process finish in 60 minutes. Purified DNA includes genomic DNA, mitochondrial DNA, viral DNA (e.g. HBV), or DNA from other parasitic microorganisms. The obtained DNA can be directly used in PCR, viral DNA detection and other experiments.

This kit can use on manual protocol or 96 channel automated extraction system.

Details

Specifications

Features	Specifications
Main Functions	Isolation total DNA from 200μl whole blood
Applications	PCR, southern bolt and virus detection, etc
Purification technology	Magnetic beads technology
Process method	Manual or automatic
Sample type	Anticoagulant blood, concentrated blood, buffy coat, lymphocytes and cultured cells
Sample amount	200μl
Elution volume	≥50μl
Time per run	≤60 minutes

Principle

This product is based on the purification method of high binding magnetic particles. The sample is lysed and digested under the action of lysate and Protease. DNA is released into the lysate. After adding magnetic particles and binding solution, DNA will be adsorbed on the surface of magnetic particles, and impurities such as proteins will be removed without adsorption. The adsorbed particles were washed with washing solution to remove proteins and impurities, washed with ethanol to remove salts, and finally DNA was eluted by Elution Buffer.

Advantages

• High binding force – suitable for handling DNA rich samples, such as whole blood, buffy coat, concentrated blood, etc.
• Fast – polydisperse magnetic beads, fast magnetic response and short extraction time
• High purity – the obtained DNA can be directly used for second-generation sequencing, PCR based detection, gene bank, etc.
• Automatic – saving time and labor and safer

Kit Contents

Contents	D631101	D631102	D631103
Purification Times	48	96	480
MagPure Particles	1.2 ml	2.5 ml	11 ml
Proteinase K	24 mg	50 mg	220 mg
Protease Dissolve Buffer	1.8 ml	5 ml	15 ml
Buffer AL	15 ml	30 ml	120 ml
Buffer GW1*	22 ml	53 ml	220 ml
Elution Buffer	15 ml	30 ml	100 ml

Storage and Stability

Proteinase K, MagPure Particles should be stored at 2-8°C upon arrival. However, short-term storage (up to 24 weeks) at room temperature (15-25°C) does not affect their performance. The remaining kit components can be stored dry at room temperature (15-25°C) and are stable for at least 18 months under these conditions. The entire kit can be stored at 2-8°C, but in this case buffers should be redissolved before use. Make sure that all buffers are at room temperature when used.

This product provides high quality purification of total DNA from whole blood, plasma, serum, buffy coat, or other body fluids, lymphocytes and cultured cells. There is no need to use toxic phenol chloroform extraction or time-consuming alcohol precipitation. The extraction process finish in 60 minutes. Purified DNA includes genomic DNA, mitochondrial DNA, viral DNA (e.g. HBV), or DNA from other parasitic microorganisms. The obtained DNA can be directly used in PCR, viral DNA detection and other experiments.

This kit can use on manual protocol or 96 channel automated extraction system.

Overview

• All-in-one solution for inclusion body protein isolation and purification
• Fast and convenient spin column protocol
• Complete kit with Cell Lysis Reagent, Inclusion Body Solubilization Reagent, buffers and spin columns to purify proteins
• Purification is based on spin column chromatography that uses Norgen’s resin separation matrix

These kits provide everything required to isolate and purify inclusion body proteins from induced bacterial cultures. First a proprietary Cell Lysis Reagent is used to selectively lyse the cells and release inclusion bodies in their solid form. Next, inclusion bodies are dissolved and their contents released using the provided IB Solubilization Reagent. Inclusion body proteins are then further purified using spin columns for rapid and convenient buffer exchange and desalting. This kit provides a convenient way to screen recombinants prior to scaling up.

ProteoSpin™ Inclusion Body Protein Isolation Micro Kit

The process is efficient and streamlined and can process up to 12 samples in only 60 minutes. Each spin column is able to recover up to 50 µg of acidic or basic proteins. Purified recombinant proteins are then ready for SDS-PAGE, 2D gels, Western blots, Mass Spectrometry analysis, and other applications.

ProteoSpin™ Inclusion Body Protein Isolation Maxi Kit

The procedure is efficient and streamlined and can process up to 4 samples in approximately 2 hours. Each spin column is able to recover up to 12 mg of acidic or basic proteins from 100 mL of induced bacterial culture. Purified recombinant proteins are then ready for SDS-PAGE, 2D gels, Western blots, Mass Spectrometry analysis, and other applications.

About Inclusion Bodies

Bacteria are widely used for the expression of different proteins. However, 70-80% of the proteins expressed in bacteria by recombinant techniques are typically contained in insoluble inclusion bodies (i.e., protein aggregates). The protein of interest found in these subcellular structures is often inactive, due to incorrect folding. The production rate of recombinant proteins stored in inclusion bodies is invariably higher than those synthesized as soluble proteins. The reason behind this is thought to be the resistance of insoluble proteins to proteolysis by cellular enzymes. In addition, separation of insoluble recombinant proteins in inclusion bodies is considerably easier than that of soluble proteins. These factors have been the major influences favoring scale-up of high-value proteins using bacterial fermentation for example. Procedures for the purification of the expressed proteins from inclusion bodies are often labour-intensive, time-consuming and not cost-effective. This kit provides the essential reagents for cell disruption, inclusion body solubilization and purification using spin column chromatography – all optimized to work together thereby simplifying the process and saving a tremendous amount of time and cost.

Details

Supporting Data

Figure 1 / 5

Previous

Next

Click for expanded view

Kit Specifications
Maximum Culture Volume	1.5 mL
Yield from 1.5 mL	Up to 50 μg
Minimum Elution Volume	30 μL
Time to Process 12 Samples	60 minutes

Storage Conditions

The Cell Lysis Reagent and IB Solubilization Reagent should be stored at 4°C upon receipt of this kit. All other solutions should be kept tightly sealed and stored at room temperature. This kit is stable for 2 years after the date of shipment. Once opened, the solutions should be stored at 4°C when not in use except for the pH Binding Buffers (Acidic and Basic). Some precipitation will occur with 4°C storage. This precipitation should be dissolved with slight heating to room temperature before using.

Component	Cat. 10300 (Micro – 25 preps)	Cat. 17700 (Maxi – 4 preps)
Wash Solution C	30 mL	130 mL
Wash Solution N	30 mL	130 mL
Binding BUffer A	4 mL	20 mL
Binding Buffer N	4 mL	20 mL
Elution Buffer C	8 mL	2 x 30 mL
Protein Neutralizer	4 mL	4 mL
Cell Lysis Reagent	15 mL	110 mL
IB Solubilization Reagent	2 mL	50 mL
Syringes, 1cc, slip tip	25	–
Needles (Bev, 20G x 1 inch)	25	–
Syringes, 10 mL, Luer-Lok™ Tip	–	4
Needles (18G x 1.5 inch)	–	4
Micro Spin Columns	25	–
Maxi Spin Columns (filled with SiC) inserted into 50 mL collection tubes	–	4
Collection Tubes	25	–
Elution Tubes (1.7 mL)	25	–
Elution Tubes (50 mL)	–	4
Product Insert	1	1