Introduction

This product provides fast and easy methods for purification of total DNA for reliable PCR and Southern blotting. Total DNA (e.g., genomic, viral, mitochondrial) can be purified from whole blood, tissue and culture cells.

Details

Specifications

Features	Specifications
Main Functions	Isolation total DNA from 10ml blood and 1g tissue using Maxi column
Applications	PCR, southern bolt and virus detection, etc
Purification method	Maxi spin column
Purification technology	Silica technology
Process method	Manual (centrifugation or vacuum)
Sample type	Tissue, cell, blood, saliva, swab, blood spot, semen and other clinical samples
Sample amount	3-10ml
Elution volume	≥700μl
Time per run	≤90 minutes
Liquid carrying volume per column	4ml
Binding yield of column	5mg

Principle

This product is based on silica column purification. The sample is lysed and digested with lysate and protease, DNA is released into the lysate. Transfer to an adsorption column. Nucleic acid is adsorbed on the membrane, while protein is not adsorbed and is removed with filtration. After washing proteins and other impurities, Nucleic acid was finally eluted with low-salt buffer (10mm Tris, pH9.0, 0.5mm EDTA).

Advantages

• High quality DNA – meet a variety of downstream applications, including PCR, qPCR, enzyme digestion, hybridization, etc.
• Fast – without separation of leukocytes, organic extraction or ethanol precipitation
• Simple – all nucleic acids can be obtained by direct digestion
• Pertinence – specially designed for isolating DNA from 3-10ml blood and related body fluids
• Wide applicability – handle a variety of liquid samples
• Economy – excellent cost effectiveness performance

Kit Contents

Contents	D311502	D311503
Purification Times	10	50
HiPure gDNA Maxi Columns	10	50
50ml Collection Tubes	20	100
Buffer ATL	120 ml	550 ml
Buffer AL	120 ml	2 x 300 ml
Buffer GW1*	53 ml	220 ml
Buffer GW2*	25 ml	110 ml
RNase A	40 mg	180 ml
Proteinase K	120 mg	540 mg
Protease Dissolve Buffer	12 ml	50 ml
Buffer AE	30 ml	120 ml

Storage and Stability

Proteinase K, RNase A should be stored at 2-8°C upon arrival. However, short-term storage (up to 12 weeks) at room temperature (15-25°C) does not affect their performance. The remaining kit components can be stored at room temperature (15-25°C) and are stable for at least 18 months under these conditions.

Purchase Guide

Name	CAT NO	Sample amount	Leukocyte protocol*	Colum type	Elutio volume	Average yield	Time per run
HiPure Blood DNA Mini Kit	D3111	10-200μl	1ml	2ml column	≥20μl	5-9μg/200μl	≤30 minutes
HiPure Tissue&Blood DNA Midi Kit	D3113	0.2-2ml	10ml	1.5ml column	≥300μl	20-40μg/1m	≤80 minutes
HiPure Tissue&Blood DNA Maxi Kit	D3115	3 -10ml	10ml	15ml column	≥700μl	20-40μg/1m	≤90 minutes
HiPure Tissue&Blood DNA 96 Kit	D3117	1-200μl	1ml	96 well plate		3-8μg/200μl

*Note：Leukocyte protocol can be used when large volume whole blood samples need to be processed. Whole blood was treated with red blood cell lysate, and white blood cells were obtained by centrifugation before extraction

Select the right purification kit to get impactful results：

Ⅰ. Purchase guide of Magen kits based on sample

Ⅱ. Cross purchase guide for Magen kits vs Other brands

For any customized product or OEM service, please contact us.

This product provides fast and easy methods for purification of total DNA for reliable PCR and Southern blotting. Total DNA (e.g., genomic, viral, mitochondrial) can be purified from whole blood, tissue and culture cells.

Details

Introduction

The HiPure Plasmid EF Mini Kit combine the power of HiPure technology with Magen’s innovative endotoxin removal technology to deliver high-quality plasmid DNA with low endotoxin levels foruse in eukaryotic transfection, and in vitro experiments. The HiPure plasmid endo-free system uses a specially formulated buffer that prevents endotoxin molecules from binding to the surface of the HiPure matrix. Endotoxin contamination lowers transfection efficiencies for endotoxin sensitive celllines. For gene therapy, endotoxin contamination should be of major concernsince endotoxins have the potential to cause fever, endotoxin shock syndrome, and interfere with in vitro transfection into immune cells.

Details

Specifications

Features	Specifications
Main Functions	Isolation up to 80µg endotoxin-free plasmid DNA from 5-15ml bacterial culture. Recommend for low copy vector, Thoroughly remove RNA
Applications	Cell transfection, animal injection, etc.
Purification method	Mini spin column
Purification technology	Silica technology
Process method	Manual (centrifugation or vacuum)
Sample type	Low copy plasmid vector
Sample amount	5-15ml LB
Yield	10-70μg
Elution volume	≥75μl
Time per run	≤40 minutes
Liquid carrying volume per column	800μl
Binding yield of column	70μg

Principle

The HiPure Plasmid procedure is based on alkaline lysis of bacterial cells followed by adsorption of DNA onto silica in the presence of high salt. The unique silica membrane used in the kit completely replaces glass or silica slurries for plasmid DNA minipreps. The procedure consists of 3 basic steps: Preparation and clearing of a bacterial lysate by alkaline method，then transfer the supernatant to column to bind DNA. After washing proteins and other impurities, nucleic acid was finally eluted with low-salt buffer (10mm Tris, pH9.0, 0.5mm EDTA).

Advantages

• High purity – purified plasmid can be directly used in sequencing, enzyme digestion and PCR, etc.
• Fast – silica gel column purification is much faster than ion exchange
• High yield – up to 70μg plasmid can be binded in one column
• Low endotoxin content – the obtained plasmid can be directly used in cell transfection and animal injection

Kit Contents

Contents	P115402	P115403
Purification Times	50 Preps	250 Preps
RNase A	5 mg	20 mg
Buffer P1	30 ml	140 ml
Buffer P2	30 ml	140 ml
Buffer LEN3	15 ml	70 ml
Buffer LN4	50 ml	250 ml
Buffer LN5	30 ml	140 ml
Buffer PW1	30 ml	140 ml
Buffer PW2	12 ml	50 ml
Elution Buffer	15 ml	30 ml
HiPure DNA Mini Columns III	50	250
2 ml Collection Tubes	50	250

Storage and Stability

The kit components can be stored dry at room temperature (15–25°C) and are stable for at least 18 months under these conditions. If any precipitates form in the buffers, warm at 37℃ to dissolve. After addition of RNase A，Buffer P1 is stable for 6 months when stored at 2–8°C.

Purchase Guide

Name	CAT NO	Features	Sampleamount	Elutionvolume	Yield
HiPure Plasmid Mini Kit	P1001	Classic, Regular application	1-5ml LB	30-50μl	5–35µg/5ml
HiPure Plasmid Mini Kit II	P1002	Classic, Regular application	5-15ml LB	75-100μl	20-80µg/15ml
HiPure Plasmid Plus 96 Kit	P1006	Classic, Regular application	1-1.5ml LB	70-150μl	1-15μg/1ml
HiPure Fastfilter Plasmid Midi Kit	P1013	Fast	30-50ml LB	0.3-0.8ml	50–250µg/50ml
HiPure Fastfilter Plasmid Maxi Kit	P1014	Fast	100-200ml LB	0.5-1.5ml	0.4–1mg/200ml
Low endotoxin/Endotoxin-free Plasmid
HiPure Plasmid EF Maxi Kit	P1156	Classic method, General for all kinds of vectors	100-200ml LB	≥0.7ml	200–1500µg
HiPure Plasmid EF Mini Kit	P1154	Recommend for low copy vector, Thoroughly remove RNA	5-15ml LB	≥60μl	10–80µg
HiPure Plasmid EF 96 Kit	P1157	Recommend for low copy vector, Thoroughly remove RNA	1-5ml LBx96	≥75μl	30µg
HiPure Plasmid EF Midi Kit	P1231	Recommend for High copy vector, Low elution volume, High concentration	25-50ml LB	≥100μl	10-500μg
HiPure Plasmid EF Mega Kit	P1116	Recommend for High copy vector(>3μg/ml)	500ml LB	≥2ml	1-10mg

For any technical problems or customized products, please contact us.

F&Q about Endotoxin-free Plasmid Extraction Kit — P1156 ←click here

The HiPure Plasmid EF Mini Kit combine the power of HiPure technology with Magen’s innovative endotoxin removal technology to deliver high-quality plasmid DNA with low endotoxin levels foruse in eukaryotic transfection, and in vitro experiments. The HiPure plasmid endo-free system uses a specially formulated buffer that prevents endotoxin molecules from binding to the surface of the HiPure matrix. Endotoxin contamination lowers transfection efficiencies for endotoxin sensitive celllines. For gene therapy, endotoxin contamination should be of major concernsince endotoxins have the potential to cause fever, endotoxin shock syndrome, and interfere with in vitro transfection into immune cells.

Description

Our SNPsig® kits use our own proprietary genotyping method to enable the identification of SARS-CoV-2 variants of concern. These products can be used on any real-time PCR machine using familiar protocols, whilst resulting in exceptional genotyping data.

Positive control templates for wild-type and variants are supplied in every kit to make data interpretation simple.

Our SNPsig® technology provides an alternative to sequencing as well as S gene target failure (SGTF) that enables scientists to analyse and monitor these specific genomic mutations.  Our kits can provide a pivotal role in screening for SARS-CoV-2 variants for the purpose of genomic surveillance and studies.

For the detection of the SARS-CoV-2 (20H/501Y.V2 South Africa)
Rapid detection of specific detection profiles
High priming efficiency
Sensitive to < 100 copies of target Positive copy number standard curve for quantification Accurate controls to confirm findings 96 reactions, includes master mix