m-PEG8-DBCO is a monodisperse PEG reagents which can enable copper-free Click Chemistry through the reaction of DBCO with azide. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.
m-PEG8-DBCO is a monodisperse PEG reagents which can enable copper-free Click Chemistry through the reaction of DBCO with azide. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.
m-PEG8-DBCO is a monodisperse PEG reagents which can enable copper-free Click Chemistry through the reaction of DBCO with azide. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.
2,5-Dioxopyrrolidin-1-yl 2-(prop-2-yn-1-yloxy)acetate is a Click Chemistry reagent with a propargyl group and an NHS ester group. The propargyl group can react with biomolecules containing azide group via copper catalyzed Click Chemistry reaction. The NHS ester is an amine reactive group which can be used for derivatizing peptides, antibodies, amine coated surfaces, etc. Reagent grade, for research use only.
2,5-Dioxopyrrolidin-1-yl 2-(prop-2-yn-1-yloxy)acetate is a Click Chemistry reagent with a propargyl group and an NHS ester group. The propargyl group can react with biomolecules containing azide group via copper catalyzed Click Chemistry reaction. The NHS ester is an amine reactive group which can be used for derivatizing peptides, antibodies, amine coated surfaces, etc. Reagent grade, for research use only.
Ideal magnet for all of your low volume needs. From Low elution 96-well PCR applications to 384-well, the X396 has you covered. No need to purchase two separate plates anymore. 96-well volumes as low as 4 µL are achieved from 96-well, PCR plates on the inside of the magnet, while the outside of each magnet will pull beads to well sides in 384-well plates.
ANSI/ SBS Footprint (127.75mm x 85.50mm) to fit into any automated liquid handling robot on bottom. ANSI/SBS footprint on top to accept all common microplates.
Integrated Cushion base for maximum recovery. Helps aid in set-up, robot positioning inconsistencies, and labware consumable inconsistencies
Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads
A040523
A040523KT (Kit for 0.2 ml tubes)
384-Well PCR
Maximum – 39 µL
Minimum – 5 µL
__________
96-Well PCR
Maximum – 60 µL (0.2 mL for some beads)
Minimum – 4 µL
Ideal magnet for all of your low volume needs. From Low elution 96-well PCR applications to 384-well, the X396 has you covered. No need to purchase two separate plates anymore. 96-well volumes as low as 4 µL are achieved from 96-well, PCR plates on the inside of the magnet, while the outside of each magnet will pull beads to well sides in 384-well plates.
Norgen’s FFPE RNA Purification Kits provide a rapid method for the isolation and purification of total RNA (including microRNA) from formalin-fixed paraffin-embedded (FFPE) tissue samples in as little as 1 hour. Using formalin to fix tissues leads to crosslinking of the RNA and proteins, and the process of embedding the tissue samples can also lead to fragmentation of the RNA over time. Norgen’s FFPE RNA Purification Kits provide conditions that allow for the partial reversing of the formalin modifications, resulting in a high quality and yield of RNA. These kits are able to purify all sizes of RNA, from large mRNA and ribosomal RNA down to microRNA (miRNA) and small interfering RNA (siRNA), depending on the age of the FFPE tissue as fragmentation of the RNA is known to occur over time. The RNA is preferentially purified from other cellular components without the use of phenol or chloroform.
FFPE RNA Purification Kit (Spin Column)
Maximum loading volume of 650 μL per column, and a maximum binding capacity of 50 μg per column.
FFPE RNA Purification 96-Well Kit (High Throughput)
Purification is based on 96-well column chromatography using Norgen’s proprietary resin as the separation matrix. Purification can be performed using either a vacuum manifold or centrifugation. Maximum loading volume of 400 μL per well, and a maximum binding capacity of 50 μg per well.
Figure 1 / 5
Click for expanded view
| Kit Specifications | |
| Maximum Binding Capacity Per Well | 50 μg |
| Maximum Loading Volume Per Well | 400 μL |
| Size of RNA Purified | All sizes, including small RNA (< 200 nt) |
| Maximum Amount of Starting Material: | 5 slices of < 20 µm thick paraffin 25 mg of unsectioned block |
Storage Conditions and Product Stability
All solutions should be kept tightly sealed and stored at room temperature. The DNAse I should be stored at -20°C upon arrival. The Proteinase K should be stored at -20°C upon arrival and after reconstitution. This kit is stable for 1 year after the date of shipment.
| Component | Cat. 25300 (50 preps) | Cat. 25400 (2 x 96 preps) |
|---|---|---|
| Digestion Buffer A | 25 mL | 2 x 25 mL |
| Buffer RL | 30 mL | 2 x 30 mL |
| Enzyme Incubation Buffer | 6 mL | 2 x 6 mL |
| Wash Solution A | 38 mL | 2 x 38 mL |
| Elution Solution A | 6 mL | 2 x 20 mL |
| Proteinase K | 12 mg | 2 x 20 mg |
| DNase I | 1 vial | 2 x 500μL |
| Micro Spin Columns | 50 | – |
| 96-Well Incubation Plate | – | 2 |
| 96-Well Plate | – | 2 |
| Adhesive Tape | – | 8 |
| Collection Tubes | 50 | – |
| 96-Well Collection Plate | – | 2 |
| Elution Tubes (1.7 mL) | 50 | – |
| 96-Well Elution Plate | – | 2 |
| Product Insert | 1 | 1 |