NEST 12-Well Reservoirs, 15 mL, polypropylene, sterile, DNase, RNase, pyrogen and endotoxin free. Conforms to SBS and ANSI requirements. Low profile design. Can be stored at -80℃. 50 reservoirs.
Labware definition is available for immediate use in Opentron’s Labware Library.
Detail
NEST 12-Well Reservoirs, 15 mL, polypropylene, sterile, DNase, RNase, pyrogen and endotoxin free. Conforms to SBS and ANSI requirements. Low profile design. Can be stored at -80℃. 50 reservoirs.
Labware definition is available for immediate use in Opentron’s Labware Library.
Other Products
P1013 HiPure Fastfilter Plasmid Midi Kit
Product Info
Document
Product Info
Introduction
The HiPure Fastfilter Plasmid DNA Midi Kits combine the power of HiPure technology with the time-tested consistency of alkaline-SDS lysis of bacterial cells to deliver high-quality DNA. HiPure DNA columns facilitate the binding, washing and elution steps thus enabling multiple samples to be simultaneously processed. This system also includes aspecial filter cartridge which replaces the centrifugation step following alkaline lysis. Plasmid DNA purified by this system is suitable for automated fluorescent DNA sequencing, restriction endonuclease digestion, transfection of mammalian cells, and other manipulations. Up to 250 µg high copy number plasmid DNA or 10-75 µg low copy number plasmid DNA can be purified from 15-50 mL overnight culture.
Details
Specifications
Features
Specifications
Main Functions
Isolation up to 250μg plasmid DNA from 30-50ml bacterial culture
Applications
Enzyme digestion, sequencing, PCR and labeling, etc.
Purification method
Midi spin column
Purification technology
Silica technology
Process method
Manual (centrifugation or vacuum)
Sample type
Conventional plasmid, plasmid less than 30KB
Sample amount
30-50ml
Yield
50-250µg
Elution volume
≥300μl
Time per run
≤60 minutes
Liquid carrying volume per column
4ml
Binding yield of column
250µg
Principle
The HiPure Plasmid procedure is based on alkaline lysis of bacterial cells followed by adsorption of DNA onto silica in the presence of high salt. The unique silica membrane used in the kit completely replaces glass or silica slurries for plasmid DNA minipreps. The procedure consists of 3 basic steps: Preparationand clearing of a bacterial lysate by alkaline method,then transfer the supernatant to column to bind DNA. After washing proteins and other impurities, nucleic acid was finally eluted with low-salt buffer (10mm Tris, pH9.0, 0.5mm EDTA).
Advantages
High purity – purified plasmid can be directly used in sequencing, enzyme digestion and PCR, etc.
Fast – it takes only 15-60 minutes to complete the isolation
High yield – up to 70µg plasmid can be binded in one column
Kit Contents
Contents
P101302
P101303
Purification Times
25 Preps
100 Preps
RNase A
10 mg
40 mg
Buffer P1
80 ml
300 ml
Buffer P2
80 ml
300 ml
Buffer LEN3
40 ml
150 ml
Buffer GBT
60 ml
250 ml
Buffer PW1
60 ml
250 ml
Buffer PW2
20 ml
100 ml
Elution Buffer
30 ml
120 ml
HiPure DNA Midi Columns III
25
100
Lysate Clear Midi Syringe
25
100
15 ml Collection Tubes
50
200
Storage and Stability
The kit components can be stored dry at room temperature (15-25°C) and are stable for at least 18 months under these conditions. If any precipitates form in the buffers, warm at 37℃ to dissolve. After addition of RNase A,Buffer P1 is stable for 6 months when stored at 2-8°C.
The HiPure Fastfilter Plasmid DNA Midi Kits combine the power of HiPure technology with the time-tested consistency of alkaline-SDS lysis of bacterial cells to deliver high-quality DNA. HiPure DNA columns facilitate the binding, washing and elution steps thus enabling multiple samples to be simultaneously processed. This system also includes aspecial filter cartridge which replaces the centrifugation step following alkaline lysis. Plasmid DNA purified by this system is suitable for automated fluorescent DNA sequencing, restriction endonuclease digestion, transfection of mammalian cells, and other manipulations. Up to 250 µg high copy number plasmid DNA or 10-75 µg low copy number plasmid DNA can be purified from 15-50 mL overnight culture.
RNA/microRNA/DNA/Proteins are preserved for more than 2 years at room temperature in Norgen’s Urine Preservative
Compatible with most DNA, Total RNA, microRNA and protein isolation methods
Preservative is available in a single dose liquid format (ampule)
Preservative is also available in a dried format in tubes – Urine Collection and Preservation Tubes
Urine Collection and Preservation Devices are available in 4 convenient sizes: 5 cc tubes, 15 cc tubes, 50 cc tubes, and 120 cc cups
Norgen’s Urine Preservative is designed for the rapid preservation of DNA, RNA, microRNA and proteins from fresh urine samples. In addition, the Urine Preservative eliminates the need to immediately process or freeze samples and allows the samples to be shipped to centralized testing facilities at ambient temperatures. The components of the Urine Preservative allow samples to be stored for over 2 years at room temperature with no detected degradation of urine DNA, RNA or proteins.
Norgen’s Urine Preservative is available in 2 convenient formats:
1. Urine Preservative Single Dose Ampules With this product Norgen’s Urine Preservative is supplied in a liquid format in single dose ampules. The user simply collects 5 – 50 mL of urine into a urine collection container and adds the contents of the Urine Preservative Single Dose (Cat# 18126). The urine and preservative are then mixed, and the urine nucleic acids and proteins are preserved at room temperature.
2. Urine Collection and Preservation Tubes Norgen’s Urine Preservative is also available in a dried format in Norgen’s Urine Collection and Preservation Tubes. The user simply collects urine into the tubes and mixes gently until the orange preservative pellet in the tube has dissolved. Norgen’s Urine Collection and Preservation Tubes are available in 3 convenient sizes:
Select Urine Tested with the Norgen Urine Collection and Preservation Tubes
Human Mouse Lynx Wolf Urine collected from snow
Available Sizes and Formats
Urine Collection and Preservation Tubes (5 cc) – Urine inputs from 1 – 5 mL
Storage Conditions and Product Stability All tubes should be kept tightly sealed and stored at room temperature (15 – 25°C) for up to 2 years without any reduction in performance.
Kit Components
Cat. 18118 (50 tubes)
Cat. 18122 (50 tubes)
Cat. 18113 (50 tubes)
Cat. 18126 (50 tubes)
Cat. 18129 (1 cup)
Urine Collection and Preservation Tubes (5 cc)
50
–
–
–
–
Urine Collection and Preservation Tubes (15 cc)
–
50
–
–
–
Urine Collection and Preservation Tubes (50 cc)
–
–
50
–
–
Urine Preservative Single Dose
–
–
–
50
–
Urine Collection and Preservation Cup (120 cc)
–
–
–
–
1
ID Labels
50
–
–
50
–
Product Insert
1
1
1
1
1
Document
Norgen’s Urine Preservative is designed for the rapid preservation of DNA, RNA, microRNA and proteins from fresh urine samples. In addition, the Urine Preservative eliminates the need to immediately process or freeze samples and allows the samples to be shipped to centralized testing facilities at ambient temperatures. The components of the Urine Preservative allow samples to be stored for over 2 years at room temperature with no detected degradation of urine DNA, RNA or proteins.
Norgen’s Urine Preservative is available in 2 convenient formats:
[DL4000] ExcelDye™ 6X DNA Loading Dye, Tri-color, 5 ml x 2
Product Info
Document
Product Info
Description
The ExcelDye™ 6× DNA Loading Dye (Tri-Color) is pre-mixed buffer for tracking the DNA sample during the electrophoresis on agarose or polyacrylamide gels. It contains three dyes (Xylene cyanol FF, Bromophenol blue, Orange G) for tracking the DNA migration. The Xylene cyanol FF, Bromophenol blue and Orange G migrate at approximately 800 bp, 150 bp and 30 bp on a standard 2% TAE agarose gel respectively (4,000 bp, 500 bp and 50 bp on 1% TAE agarose gel respectively). The included glycerol keeps the DNA at the bottom of the well and the presence of EDTA chelates divalent metal ions to prevent the process of metal-dependent nuclease.
Composition
0.03% Xylene cyanol FF
0.03% Bromophenol blue
0.15% Orange G
10 mM Tris-HCl (pH 8.0)
60% glycerol
60 mM EDTA
Storage
4°C for 12 months -20°C for 36 months
Document
The ExcelDye™ 6× DNA Loading Dye (Tri-Color) is pre-mixed buffer for tracking the DNA sample during the electrophoresis on agarose or polyacrylamide gels. It contains three dyes (Xylene cyanol FF, Bromophenol blue, Orange G) for tracking the DNA migration. The Xylene cyanol FF, Bromophenol blue and Orange G migrate at approximately 800 bp, 150 bp and 30 bp on a standard 2% TAE agarose gel respectively (4,000 bp, 500 bp and 50 bp on 1% TAE agarose gel respectively). The included glycerol keeps the DNA at the bottom of the well and the presence of EDTA chelates divalent metal ions to prevent the process of metal-dependent nuclease.