Introduction

HiPure PCR Pure Micro Kit uses proprietary chemistry and HiPure technology to recover DNA fragments between 60bp-20kbp with yields exceeding 80%. DNA is suitable for ligations, PCR, sequencing, restriction digestion, or various labeling reactions. In addition, this kit can be also used to recover DNA directly from enzymatic reactions such as PCR and enzyme digestion reactions.

Details

Specifications

Features	Specifications
Main Functions	Recover DNA fragments between 60bp-20kbp from PCR products and enzymatic reaction solution
Applications	PCR, sequencing, labeling reactions, ligations and restriction digestion, etc.
Purification method	Mini spin column
Purification technology	Silica technology
Process method	Manual (centrifugation or vacuum)
Sample type	PCR products, enzymatic reaction solution
Sample amount	10-200μl
Recovery	≥80%
Elution volume	≥7μl
Time per run	≤10 minutes
Liquid carrying volume per column	800µl
Binding yield of column	10µg

Principle

The HiPure system uses a simple bind-wash-elute procedure. Gel slices are dissolved in a buffer containing a pH indicator, allowing easy determination of the optimal pH for DNA binding, and the mixture is applied to the column. Nucleic acids adsorb to the silica-gel membrane in the high-salt conditions provided by the buffer. Impurities are washed away and pure DNA is eluted with a small volume of low-salt buffer provided or water, ready to use in subsequent applications.

Advantages

• High recovery efficiency – ≥80% DNA recovery
• Fast – isolation can be completed in 10 minutes by column gel method

Kit Contents

Contents	D212002	D212003
Purification Times	100 Preps	250 Preps
Buffer DP	60 ml	120 ml
Buffer DW2	20 ml	50 ml
Elution Buffer	15 ml	30 ml
HiPure DNA Micro Columns	100	250
2 ml Collection Tubes	100	250

Storage and Stability

The Kit should be stored dry at room temperature (15-25°C) and are stable for at least 18 months under these conditions. If any precipitates form in the buffers, warm at 37℃ to dissolve.

HiPure PCR Pure Micro Kit uses proprietary chemistry and HiPure technology to recover DNA fragments between 60bp-20kbp with yields exceeding 80%. DNA is suitable for ligations, PCR, sequencing, restriction digestion, or various labeling reactions. In addition, this kit can be also used to recover DNA directly from enzymatic reactions such as PCR and enzyme digestion reactions.

Overview

• Detection kits for CMV
• Available in TaqMan format for analysis

Human Cytomegalovirus (HCMV) or Human betaherpesvirus 5 (HHV-5) is a member of the Family Orthoherpesviridae. HCMV belongs to the betaherpesvirinae subfamily, while other herpesviruses fall into the subfamilies of Alphaherpesvirinae (including HSV 1 and 2 and varicella) or Gammaherpesvirinae (including Epstein-Barr virus). All herpes viruses share a characteristic ability to remain latent within the body over long periods of time. While CMV can be found in numerous body fluids including urine, saliva, breast milk, blood, tears, semen, and vaginal fluids, urine samples are generally used for congenital HCMV infection screening due to high viruria observed in infected infants.

CMV TaqMan PCR Kit, 100 reactions

• Ready to use format, including Master Mix for the target and PCR control to monitor for PCR inhibition and validate the quality
• Specific Primer and Probe mix for the pathogen/virus/viroid of interest
• Primer and Probe mix
• Positive and negative control to confirm the integrity of the kit reagents

CMV TaqMan PCR Probe/Primer Set and Controls, 100 reactions

• Specific Primer/Probe mix and Positive Control for the pathogen/virus/viroid of interest
• Nuclease-free water
• Can be used together with Norgen’s PCR Master Mix (#28007) or customer supplied master mix

For research use only and NOT intended for in vitro diagnostics.

Details

Supporting Data

Figure 1 / 3

Previous

Next

Click for expanded view

Storage Conditions and Product Stability
All kit components can be stored for 2 years after the date of production without showing any reduction in performance.

All kit components should be stored at -20°C upon arrival.

Component	Cat. TM36350 (100 preps)	Cat. TM36310 (100 preps)
MDx TaqMan 2X PCR Master Mix	2 x 700 μL	–
CMV Primer & Probe Mix	280 μL	280 μL
CMV Positive Control	150 μL	150 μL
Nuclease-Free Water (Negative Control)	1.25 mL	1.25 mL
Product Insert	1	1

Introduction

Magnetic bead nucleic acid purification technology uses nano or micron superparamagnetic material as the matrix, generally black ferric oxide or yellowish brown ferricoxide as the magnetic material. The surface of bead is coated with appropriate functional groups, which can adsorb nucleic acid. Magnetic beads commonly used for nucleic acids, containing carboxyl groups, hydroxyl groups, or silicon groups. Silicon-based magnetic beads are the most common, and its principle of adsorbing nucleic acid is consistent with the classical glass milk purification technology or glass fiber filter membrane purification method. Magpure particle is a kind of polydisperse fast speed silica magnetic beads. The core is ferricoxide, accounting for 50%, and the surface coating is silica, accounting for 50%. The product can be used for plasmid extraction, gel DNA recovery, product purification, genomic DNA and RNA extraction, and viral nucleic acid extraction.

Details

Specifications

Features	Specifications
Concentration	100 mg/ml
Appearance	Suspension of black particles
Surface functional group	Si-OH, Silanol
Dispersibility	Polydisperse Amorphous
Particle size	1.5-5 μm
Preservation conditions	Room Temperature, valid for up to 2 years.It is recommended to store in 2-8°C to prevent microbial growth.
Magnetic response speed	15-30 seconds
Settling velocity	>5 minutes
High salt mediated binding	>2M guanidine isothiocyanate, DNA recovery up to 80%
Alcohol mediated binding	2M guanidine hydrochloride / isopropanol (30%), and the recovery of DNA / RNA was as high as 85%
PEG8000 mediated binding	The recovery of DNA/RNA was up to 85%
DNase/RNase	Not detected
DNA residue	<1 ppm
Recommended application	Plasmid extraction, gel DNA recovery, genomic DNA extraction and RNA extraction.

Principle

Highsalt mediated binding: in the solution containing 2-4M guanidine isothiocyanate, Magpure particles can selectively recover DNA molecules, and impurities such as protein polysaccharides are not adsorbed.

Alcohol mediated binding: in the solution containing guanidine salt and alcohol (>25%), Magpure particles can selectively recover DNA/RNA molecules, and proteins and other impurities are not adsorbed.

After biological samples are treated with digestive solution or lysis Buffer, DNA/RNA is released from cells, organelles and protein complexes (ribosomes and nucleosomes) into reagents. After Magpure particles and binding solution are added, DNA/RNA is adsorbed to the surface of Magpure particles to form DNA/RNA bead complex. Under the action of the magnetic field, the magnetic beads are separated and collected, and the impurities such as protein are removed with the waste liquid. After two or three steps of further cleaning, the DNA/RNA magnetic bead complex is resuspended in sterilized water or TE buffer, and the DNA/RNA falls off from the surface of the magnetic beads, so as to achieve the purpose of purification.

Ordering information

CAT.No.	Product Name	Package
C14100	MagPure Particles	100 ml
C14101	MagPure Particles	400 ml
C14102	MagPure Particles	3 x 400 ml
C14103	MagPure Particles	10 x 400 ml

Purchase Guide

Features	MagPure Particles	MagPure Particles N	MagPure Particles G	MagPure Particles F	MagBind Particles
Cat.No.	C1410	C1411	C1412	C1414	C1413
Concentration	100mg/ml	70mg/ml	40mg/ml	50mg/ml	10mg/ml
Form	Amorphous and Porous	Amorphous and Porous	Porous	Amorphous	Nonporous
Surface function	Si-OH, Silica Beads	Si-OH, Silica Beads	Si-OH, Silica Beads	Si-OH, Silica Beads	COOH, Carboxyl Beads
Dispersion	Polydisperse	Polydisperse	Monodisperse	Monodisperse	Monodisperse
Particle Size	1.5-5μm	0.2-2μm	1-1.5μm	0.2-1.5μm	0.8-1μm
Color	Black	Yellowish Brown	Dark Brown	Dark Brown	Yellowish Brown
Magnetic response	15-30s	~60s	~30s	20s	120s
Settling Time (1ml)	>5min	>10min	>3min	>3min	>2h
Usage (0.2ml Sample)	20μl	20μl	20-30μl	20-30μl	20-30μl
DNA Recover Rate (only 4M GITC)	>80%	>80%	>80%	>80%	0
DNA Recover Rate (10% PEG8000/NaCl)	>85%	>85%	>85%	>85%	>90%
Recommended Use	gDNA/RNA Isolation from Blood, Tissue, Plant, Swab, Spots, Stool, Soil and etc.Viral DNA/RNA IsolationAgarose Gel DNA Purification	DNA/RNA Isolation from low nucleic acid content samplesPlasmid IsolationDNA/RNA Clean Up	Circulating DNA IsolationViral Nucleic acid IsolationgDNA Isolation FFPE DNA/RNA Isolation	Plasmid extractiongel DNA recoverygenomicDNA/RNA extraction viral nucleic acid extractionCirculating DNA extraction	DNA/RNA Clean Up and concentrationDNA/RNA Isolation from low nucleic acid content samplesResearch immuno assays

• The MagPure magnetic-particle technology combines the speed and efficiency of silica-based DNA purification with the convenient handling of magnetic particles. DNA binds to the silica surface of the magnetic particles in the presence of a chaotropic salt. DNA bound to the particles is then efficiently washed, considerably improving the purity of DNA. High-quality DNA is eluted. The automated purification procedure completely removes enzymes, nucleotides, and other contaminants and inhibitors. Purified DNA is suitable for direct use in downstream applications, such as sequencing and microarray analysis.

Magnetic bead nucleic acid purification technology uses nano or micron superparamagnetic material as the matrix, generally black ferric oxide or yellowish brown ferricoxide as the magnetic material. The surface of bead is coated with appropriate functional groups, which can adsorb nucleic acid. Magnetic beads commonly used for nucleic acids, containing carboxyl groups, hydroxyl groups, or silicon groups. Silicon-based magnetic beads are the most common, and its principle of adsorbing nucleic acid is consistent with the classical glass milk purification technology or glass fiber filter membrane purification method. Magpure particle is a kind of polydisperse fast speed silica magnetic beads. The core is ferricoxide, accounting for 50%, and the surface coating is silica, accounting for 50%. The product can be used for plasmid extraction, gel DNA recovery, product purification, genomic DNA and RNA extraction, and viral nucleic acid extraction.