Introduction

This product is suitable for rapid extraction of total DNA from tissue, cells, blood, saliva, swabs, blood spots, semen and other clinical samples. DNA can be used directly for PCR, quantitative PCR, Southern Blot, test of virus DNA and so on.

Details

Specifications

Features	Specifications
Main Functions	Isolation total DNA from tissue / blood / body fluid / swab /dry blood spots
Applications	PCR, qPCR, southern bolt and virus detection, etc.
Purification method	Mini spin column
Purification technology	Silica technology
Process method	Manual (centrifugation or vacuum)
Sample type	Tissue, cell, blood, saliva, swab, blood spot, semen and other clinical samples
Sample amount	Solid tissue : 1-10mg, Anticoagulant blood : 200µl
Yield	1 – 15µg
Elution volume	≥20μl
Time per run	30 – 60 minutes
Liquid carrying volume per column	750µl
Binding yield of column	100µg

Principle

This product is based on silica Column purification. The sample is lysed and digested with lysate and protease, DNA is released into the lysate. Transfer to an adsorption column. Nucleic acid is adsorbed on the membrane, while protein is not adsorbed and is removed with filtration. After washing proteins and other impurities, nucleic acid was finally eluted with low-salt buffer (10mm Tris, pH9.0, 0.5mm EDTA).

Advantages

• High quality DNA – meet a variety of downstream applications, including PCR, qPCR, enzyme digestion, hybridization, etc.
• Fast – without separation of leukocytes, organic extraction or ethanol precipitation
• Simple – all nucleic acids can be obtained by direct digestion
• Wide applicability – It can handle various liquid samples, animal tissues and cultured cells

Kit Contents

Contents	IVD3018
Purification Times	100
HiPure DNA Mini Columns I	100
2ml Collection Tubes	2 x 100
Buffer ATL	60 ml
Buffer AL	60 ml
Buffer GW1	44 ml
Buffer GW2	50 ml
Proteinase K	60 mg
Protease Dissolve Buffer	5 ml
Buffer AE	15 ml

Storage and Stability

Proteinase K should be stored at 2–8°C upon arrival. However, short-term storage (up to 12 weeks) at room temperature (15–25°C) does not affect their performance. The remaining kit components can be stored at room temperature (15–25°C) and are stable for at least 18 months under these conditions. The entire kit can be stored at 2–8°C, but in this case buffers should be redissolved before use. Make sure that all buffers are at room temperature when used.

Experiment Data

This product is suitable for rapid extraction of total DNA from tissue, cells, blood, saliva, swabs, blood spots, semen and other clinical samples. DNA can be used directly for PCR, quantitative PCR, Southern Blot, test of virus DNA and so on.

Overview

• Fast and easy high throughput processing using either a vacuum manifold or centrifugation
• Process all soil types including clay, loam, sandy soils and high humic content soils such as peat, compost and manure
• Remove organic substances using the OSR Solution
• Remove all humic acid from DNA samples using the Humic Acid Removal plate
• Isolate high quality total DNA from all soil types – ready for any downstream PCR, qPCR
• ​Excellent DNA for metagenomic studies
• No phenol or chloroform extractions

This kit provides a fast, reliable and simple procedure for high throughput isolation of DNA from all types of soil samples including common soil samples and difficult soil samples with high humic acid content such as compost and manure. A combination of chemical and physical homogenization effectively lyses all microorganisms in the soil sample, and the kit removes all traces of humic acid using the provided Organic Substance Removal (OSR) Solution and Humic Acid Removal plate (HAR). Total genomic DNA can be isolated and purified from all the various microorganisms found in soil, such as bacteria, fungi and algae. The purified DNA is of the highest quality and is fully compatible with downstream PCR and qPCR  applications and more for any metagenomic study, as all humic acid substances and PCR inhibitors are removed during the isolation.

Details

Supporting Data

Figure 1 / 2

Previous

Next

Click for expanded view

Kit Specifications
Binding Capacity Per Well	50 μg
Maximum Loading Volume Per Well	500 μL
Size of DNA Purified	All sizes
Maximum Amount of Starting Material	250 mg
Time to Complete 96 Purifications	50 minutes

Storage Conditions and Product Stability
All solutions should be kept tightly sealed and stored at room temperature. This kit is stable for 1 year after the date of shipment.

Component	Cat. 26560 (192 preps)
Lysis Buffer G	2 x 100 mL
Lysis Additive A	25 mL
Binding Buffer I	25 mL
OSR Solution	12 mL
Wash Solution A	2 x 38 mL
Elution Buffer B	30 mL
Bead Tubes	200
HAR Plate	2
96-Well Filter Plate	2
Adhesive Tape	4
96-Well Collection Plate	4
96-Well Elution Plate	2
Product Insert	1

Introduction

This product supplies a simple and rapid extraction of total RNA from plant and fungal samples. The kit is based on super paramagnetic particles purification technology, no phenol-chloroform extraction or alcohol precipitation. The whole extraction process takes only 60 minutes. Purified RNA is ready for downstream applications such as RT-PCR, virus RNA testing and so on. MagPure RNA Kits buffers can be used for both manual extraction process and automatic nucleic acid extraction machines. This Kits is suitable for extracting RNA from ≤5×10⁶ cultured cells, 20mg tissue and <50mg plant samples.

Details

Specifications

Features	Specifications
Main Functions	Isolation total RNA from 50mg plant using magnetic particles
Applications	RT-PCR, cDNA synthesis, second generation sequencing
Purification method	Polydisperse magnetic beads
Purification technology	Magnetic beads technology
Process method	Manual or automatic
Sample type	Plant and fungus samples
Sample amount	≤50mg
Yield	2-100μg
Time per run	≤60 minutes

Principle

This product is based on the purification method of high binding magnetic particles. The sample is lysed and digested under the action of lysate and Protease. After adding magnetic particles and binding solution, RNA will be adsorbed on the surface of magnetic particles, and impurities such as proteins will be removed without adsorption. The adsorbed particles were washed with washing solution to remove proteins and impurities, washed with ethanol to remove salts, and finally RNA was eluted by Elution Buffer.

Advantages

• High quality – high purity total RNA can be directly used in various sensitive downstream applications
• Safe – no phenol chloroform extraction required
• Fast – several samples can be extracted in 60 minutes by column method
• Universal – two lysates suitable for most plant or fungal tissue samples

Kit Contents

Contents	R664101	R664102	R664103
Purification Times	48 Preps	96 Preps	480 Preps
MagPure RNA Particles	1.7 ml	3.5 ml	18 ml
DNase I	600 μl	2 x 600 μl	10 x 600 μl
DNase Buffer	30 ml	40 ml	200 ml
Buffer PRC1	40 ml	70 ml	350 ml
Buffer RL	40 ml	70 ml	350 ml
Buffer MCB*	18 ml	30 ml	150 ml
Buffer MW1*	22 ml	44 ml	220 ml
Buffer MW2*	20 ml	50 ml	2 x 100 ml
RNase Free Water	10 ml	15 ml	120 ml

Storage and Stability

MagPure RNA Particles should be stored at 2–8°C upon arrival. DNase I should be stored at -20°C. However, short-term storage (DNase I up to 1 weeks, MagPure RNA Particles up to 8 weeks) at room temperature (15–25°C) does not affect their performance. The remaining kit components can be stored at room temperature (15–25°C) and are stable for at least 18 months under theseconditions.

This product supplies a simple and rapid extraction of total RNA from plant and fungal samples. The kit is based on super paramagnetic particles purification technology, no phenol-chloroform extraction or alcohol precipitation. The whole extraction process takes only 60 minutes. Purified RNA is ready for downstream applications such as RT-PCR, virus RNA testing and so on. MagPure RNA Kits buffers can be used for both manual extraction process and automatic nucleic acid extraction machines. This Kits is suitable for extracting RNA from ≤5×106 cultured cells, 20mg tissue and