RPA Isothermal Amplification Kit freeze-dried powder

Overview

• Detection kits for Legionella sp.
• Available for TaqMan format for analysis

Norgen’s Legionella sp. TaqMan PCR Kit is designed for the detection of Legionella sp. specific DNA in a real-time PCR based on the use of TaqMan technology. This kit is designed for research use only and not for use in diagnostic procedures. The detection of Legionella sp. specific DNA is based on TaqMan PCR providing a simple, reliable and rapid result for the detection of Legionella sp. infection. Norgen’s Legionella sp. TaqMan PCR Kit includes a PCR control to monitor for PCR inhibition, and to validate the quality of the sample and the detection result. The Legionella sp. TaqMan PCR Kit comprises Master Mix for the target and PCR control detection, Primer & Probe Mix, as well as a positive control and a negative control (nuclease-free water) to confirm the integrity of the kit reagents.

Legionella sp. TaqMan PCR Kit, 100 reactions

• Ready to use format, including Master Mix for the target and PCR control to monitor for PCR inhibition and validate the quality
• Specific Primer and Probe mix for the pathogen/virus/viroid of interest
• Primer and Probe mix
• Positive and negative control to confirm the integrity of the kit reagents

Legionella sp. TaqMan PCR Probe/Primer Set and Controls, 100 reactions

• Specific Primer/Probe mix and Positive Control for the pathogen/virus/viroid of interest
• Nuclease-free water
• Can be used together with Norgen’s PCR Master Mix (#28007) or customer supplied master mix

For research use only and NOT intended for in vitro diagnostics.

Details

Supporting Data

Figure 1 / 3

Previous

Next

Click for expanded view

Storage Conditions and Product Stability
All kit components can be stored for 2 years after the date of production without showing any reduction in performance.

All kit components should be stored at -20°C upon arrival. Repeated thawing and freezing (> 2 x) of the Master Mix and Positive Control should be avoided, as this may affect the performance of the assay. If the reagents are to be used only intermittently, they should be frozen in aliquots.

Component	Cat. TM64450 (100 rxns)	Cat. TM64410 (100 rxns)
MDx TaqMan 2X PCR Master Mix	2 x 700 mμL	–
Legionella sp. Primer & Probe Mix	280 μL	3 x 70 μL
Legionella sp. Positive Control	150 μL	3 x 50 μL
Nuclease-Free Water (Negative Control)	1.25 mL	1.25 mL
Product Insert	1	1

Overview

• Detection kits for the HPV 6/16
• Available in TaqMan format for analysis

More than 70 types of human papillomavirus (HPV) have been identified, and are generally classified as high-risk or low-risk depending on their relationship or lack of relationship with cancer and high-grade cervical intraepithelial neoplasia (CIN 2-3). HPV viruses are predominantly sexually transmitted and high-risk HPV types are a major risk factor for development of cervical cancer. HPV 16 has been considered as a high-risk cancer associated HPV type. The low-risk HPV type 6 has been associated with the presence of genital warts. There are many other low-risk HPV types that are not associated with genital warts or cervical cancer. Until now, HPV cannot be cultured in vitro, and immunological tests are inadequate to determine the presence of HPV cervical infection. On the other hand, biopsies can be analyzed by nucleic acid hybridization to directly detect the presence of HPV DNA.

HPV 6/16 TaqMan PCR Kit, 100 reactions

• Ready to use format, including Master Mix for the target and PCR control to monitor for PCR inhibition and validate the quality
• Specific Primer and Probe mix for the pathogen/virus/viroid of interest
• Primer and Probe mix
• Positive and negative control to confirm the integrity of the kit reagents

HPV 6/16 TaqMan PCR Probe/Primer Set and Controls, 100 reactions

• Specific Primer/Probe mix and Positive Control for the pathogen/virus/viroid of interest
• Nuclease-free water
• Can be used together with Norgen’s PCR Master Mix (#28007) or customer supplied master mix

For research use only and NOT intended for in vitro diagnostics.

Details

Supporting Data

Figure 1 / 5

Previous

Next

Click for expanded view

Storage Conditions and Product Stability
All kit components can be stored for 2 years after the date of production without showing any reduction in performance.

All kit components should be stored at -20°C upon arrival.

Component	TaqMan Probe Cat. TM42050 (100 preps)	TaqMan Probe/Primer and Control Set Cat. TM42010 (100 preps)
MDx TaqMan 2X PCR Master Mix	2 x 700 µL	–
HPV 6/16 Primer & Probe Mix	280 µL	280 µL
HPV 6/16 Positive Control	150 µL	150 µL
Nuclease-Free Water (Negative Control)	1.25 mL	1.25 mL
Product Insert	1	1

The Permagen Xle400 low elution post magnet plate was designed for use in automation applications where volumes as low as 5 µL are required. This product was designed with our already popular product (LE400 above) in mind. We have enhanced and taken this product to the next level adding automation features such as integrated cushion base and corner brackets to keep the microplate in the proper location

SBS SLAS Footprint (127.75mm x 85.50mm) to fit into any automated liquid handling robot

Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads

SKU #

A072524

Features

• SBS/ SLAS footprint
• Solid Aluminum alloy design
• Precision manufactured for more consistent results
• Fast magnetic bead separations
• Integrated bracket to help keep microplate in place and flat
• Integrated cushion base plate for precise pipetting
• Made in USA 
• For Research use only

Compatibility

• Full- skirt PCR plates such as Bio-Rad® Hard-shell PCR (recommended)
• Semi- skirt PCR plates (manual use) 
• Non-skirted PCR plates (manual use)
• Any magnetic beads
• Any common liquid handlers i.e. Tecan®, Opentrons®, Hamilton®, Agilent®, Beckman®, etc.

Volumes

Maximum  – 150 µL

Minimum  – 5 µL 

The Permagen Xle400 low elution post magnet plate was designed for use in automation applications where volumes as low as 5 µL are required. This product was designed with our already popular product (LE400 above) in mind. We have enhanced and taken this product to the next level adding automation features such as integrated cushion base and corner brackets to keep the microplate in the proper location