Description

Nucleic acid testing (NAT) is the method of choice for detection and quantification of a wide range of micro organisms. Primerdesign manufactures and supplies high quality quantitative real-time PCR kits for the detection and simultaneous quantification of numerous significant pathogens . A copy number standard curve is provided for quantification and an the internal extraction template (DNA or RNA), controls for the quality of the nucleic acid extraction and eliminates false negative results.

The kit is designed with the broadest possible detection profile to ensure that all clinically relevant strains and subtypes are detected. Target sequences are selected by working with data from key opinion leaders in the field. Multiple sequence alignments and unprecedented real-time PCR expertise in design and validation ensure the best possible kit. Details of the target and priming specificity are included in the individual handbooks above.

Packaged, optimised and ready to use. Expect Better Data.

Primer and probe mix (150 reactions)
Reverse Transcription, target specific primers (RNA genome viruses only)
Copy number standard curve (sufficient for multiple standard curves)
Internal extraction control – Read through VIC channel*
Endogenous control (150 tests)
RNAse/DNAse free water
*alternative fluorophores available on request

N-(Aminooxy-PEG2)-N-bis(PEG3-propargyl) consists of two terminal propargyl groups and an aminooxy group. The propargyl groups reacts with azide-bearing compounds or biomolecules via copper catalyzed Click Chemistry. The aminooxy group is reactive towards aldehydes to form oxime bonds. If a reductant is used, it will form a hydroxylamine linkage. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries. Aminooxy compounds are very reactive and sensitive; they cannot be stored for long term. Immediate use (within 1 week) is highly recommended.

N-(Aminooxy-PEG2)-N-bis(PEG3-propargyl) consists of two terminal propargyl groups and an aminooxy group. The propargyl groups reacts with azide-bearing compounds or biomolecules via copper catalyzed Click Chemistry. The aminooxy group is reactive towards aldehydes to form oxime bonds. If a reductant is used, it will form a hydroxylamine linkage. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries. Aminooxy compounds are very reactive and sensitive; they cannot be stored for long term. Immediate use (within 1 week) is highly recommended.

Introduction

The HiPure Plasmid DNA Mega Kits combine the power of HiPure technology with the time-tested consistency of alkaline-SDS lysis of bacterial cells to deliver high-quality DNA. HiPure DNA columns facilitate the binding, washing and elution steps thus enabling multiple samples to be simultaneously processed. Plasmid DNA purified by this system is suitable for automated fluorescent DNA sequencing, restriction endonuclease digestion, transfection of mammalian cells, and other manipulations. Up to 10 mg high copy number plasmid DNA can be purified from 500 mL overnight culture.

Details

Specifications

Features	Specifications
Main Functions	Isolation up to 10mg endotoxin-free plasmid DNA from 500ml bacterial culture
Applications	Cell transfection, animal injection, etc.
Purification method	Mega spin column
Purification technology	Silica technology
Process method	Manual (centrifugation or vacuum)
Sample type	High copy plasmid vector
Sample amount	500ml LB
Yield	1~10mg
Elution volume	≥2ml
Time per run	≤70 minutes
Liquid carrying volume per column	50ml
Binding yield of column	10mg

Principle

The HiPure Plasmid procedure is based on alkaline lysis of bacterial cells followed by adsorption of DNA onto silica in the presence of high salt. The unique silica membrane used in the kit completely replaces glass or silica slurries for plasmid DNA minipreps. The procedure consists of 3 basic steps: Preparation and clearing of a bacterial lysate by alkaline method，then transfer the supernatant to column to bind DNA. After washing proteins and other impurities, nucleic acid was finally eluted with low-salt buffer (10mm Tris, pH9.0, 0.5mm EDTA).

Advantages

• High purity – purified plasmid can be directly used in sequencing, enzyme digestion and PCR, etc.
• Fast – silica gel column purification is much faster than ion exchange
• High yield – up to 10mg plasmid can be binded in one column
• Low endotoxin – the obtainedplasmid can be directly used for cell transfection and animal injection, etc.

Kit Contents

Contents	P111602	P111603
Purification Times	10 Preps	50 Preps
RNase A	60 mg	2 x 150 mg
Buffer E1	220 ml	2 x 550 ml
Buffer E2	220 ml	2 x 550 ml
Buffer E3	220 ml	2 x 550 ml
Buffer E4	220 ml	2 x 550 ml
Buffer E5	120 ml	550 ml
Buffer PW2	25 ml	2 x 100 ml
Elution Buffer	30 ml	120 ml
HiPure EF Maxi Columns	10	50
Lysate Clear Maxi Syringe	10	50
50 ml Collection Tubes	20	100

Storage and Stability

The kit components can be stored dry at room temperature (15-25°C) and are stable for at least 18 months under these conditions. If any precipitates form in the buffers, warm at 37℃ to dissolve.

Purchase Guide

Name	CAT NO	Features	Sampleamount	Elutionvolume	Yield
HiPure Plasmid Mini Kit	P1001	Classic, Regular application	1-5ml LB	30-50μl	5–35µg/5ml
HiPure Plasmid Mini Kit II	P1002	Classic, Regular application	5-15ml LB	75-100μl	20-80µg/15ml
HiPure Plasmid Plus 96 Kit	P1006	Classic, Regular application	1-1.5ml LB	70-150μl	1-15μg/1ml
HiPure Fastfilter Plasmid Midi Kit	P1013	Fast	30-50ml LB	0.3-0.8ml	50–250µg/50ml
HiPure Fastfilter Plasmid Maxi Kit	P1014	Fast	100-200ml LB	0.5-1.5ml	0.4–1mg/200ml
Low endotoxin/Endotoxin-free Plasmid
HiPure Plasmid EF Maxi Kit	P1156	Classic method, General for all kinds of vectors	100-200ml LB	≥0.7ml	200–1500µg
HiPure Plasmid EF Mini Kit	P1154	Recommend for low copy vector, Thoroughly remove RNA	5-15ml LB	≥60μl	10–80µg
HiPure Plasmid EF 96 Kit	P1157	Recommend for low copy vector, Thoroughly remove RNA	1-5ml LBx96	≥75μl	30µg
HiPure Plasmid EF Midi Kit	P1231	Recommend for High copy vector, Low elution volume, High concentration	25-50ml LB	≥100μl	10-500μg
HiPure Plasmid EF Mega Kit	P1116	Recommend for High copy vector(>3μg/ml)	500ml LB	≥2ml	1-10mg

For any technical problems or customized products, please contact us.

F&Q about Endotoxin-free Plasmid Extraction Kit — P1156 ←click here

The HiPure Plasmid DNA Mega Kits combine the power of HiPure technology with the time-tested consistency of alkaline-SDS lysis of bacterial cells to deliver high-quality DNA. HiPure DNA columns facilitate the binding, washing and elution steps thus enabling multiple samples to be simultaneously processed. Plasmid DNA purified by this system is suitable for automated fluorescent DNA sequencing, restriction endonuclease digestion, transfection of mammalian cells, and other manipulations. Up to 10 mg high copy number plasmid DNA can be purified from 500 mL overnight culture.