Opentrons Thermocycler GEN2 Seals are adhesive-backed Ethylene Propylene Diene Monomer (EPDM) seals designed for use with the fully-automated Thermocycler Module GEN2. They come in a package of 10 seals. These seals need to be applied to the hood of the Thermocycler and can be reused up to 20 times. Opentrons Thermocycler GEN2 Seals need to be sterilized before each use.
Note, if you have a Thermocycler Module GEN1, please use the Thermocycler GEN1 Seals.
Opentrons Thermocycler GEN2 Seals are adhesive-backed Ethylene Propylene Diene Monomer (EPDM) seals designed for use with the fully-automated Thermocycler Module GEN2. They come in a package of 10 seals. These seals need to be applied to the hood of the Thermocycler and can be reused up to 20 times. Opentrons Thermocycler GEN2 Seals need to be sterilized before each use.
Note, if you have a Thermocycler Module GEN1, please use the Thermocycler GEN1 Seals.
DBCO-PEG4-PABA is an analog of DBCO-Acid with PEG linker and a 4-Aminobenzoic acid (PABA) group. The DBCO groups is commonly used for copper-free Click Chemistry reactions due to its strain promoted high energy. The hydrophilic PEG chain allows for increased water solubility. Reagent grade, for research use only.
DBCO-PEG4-PABA is an analog of DBCO-Acid with PEG linker and a 4-Aminobenzoic acid (PABA) group. The DBCO groups is commonly used for copper-free Click Chemistry reactions due to its strain promoted high energy. The hydrophilic PEG chain allows for increased water solubility. Reagent grade, for research use only.
Norgen’s Saliva/Swab RNA Purification Kits provide a rapid method for the purification of total RNA from non-preserved saliva and nasal/throat swabs, and from preserved saliva collected on Norgen’s Saliva RNA Collection and Preservation Devices (Cat. RU53800) or preserved swabs collected in Norgen’s Total Nucleic Acid Preservative Tubes (Cat. 69200). Purification is based on using Norgen’s proprietary resin separation matrix. RNA is preferentially purified from other cellular components such as proteins, without the use of phenol or chloroform. The kit allows the purification of total RNA, including viral and bacterial RNA, irrespective of size or GC content. The purified RNA is eluted in an Elution Solution that is compatible with all downstream applications including PCR, qPCR, methylation-sensitive PCR and Southern Blot analysis, microarrays, and NGS.
This kit offers a range of elution volumes, with a minimum elution volume of 75 μL and a maximum elution volume of 100 μL. Complete 10 purifications in as little as 15 minutes.
High throughput 96-well plate format for rapid purifications with very consistent well-to-well RNA isolation. Purified RNA is suitable for a variety of downstream applications , including Small RNA Sequencing. Find out more information about Norgen’s NGS Services.
Figure 1 / 8
Click for expanded view
| Kit Specifications | |
| Sample Volume Range | 250 μL |
| Size of RNA Purified | All sizes, including small RNA(<200 nt) |
| Minimum Elution Volume | 50 μL |
| Maximum Elution Volume | 100 μL |
| Time to Complete 10 Purifications | 15 – 20 minutes |
| Average Yield | ≥ 1 μg **Varies from sample to sample |
Storage Conditions and Product Stability
All solutions should be kept tightly sealed and stored at room temperature. This kit is stable for 2 years after the date of shipment.
| Kit Component | Cat. 69100 (50 preps) | Cat. 69300 (192 preps) |
|---|---|---|
| Lysis Buffer A | 30 mL | 100 mL |
| Solution WN | 18 mL | 55 mL |
| Wash Solution A | 18 mL | 2 x 38 mL |
| Elution Solution A | 6 mL | 20 mL |
| Mini Spin Columns | 50 | – |
| Collection Tubes | 50 | – |
| Elution Tubes (1.7 mL) | 50 | – |
| 96-Well Isolation Plate | – | 2 |
| 96-Well Collection Plate | – | 2 |
| 96-Well Elution Plate | – | 2 |
| Adhesive Tape | – | 4 |
| Product Insert | 1 | 1 |
Ideal magnet for all of your low volume needs. From Low elution 96-well PCR applications to 384-well, the X396 has you covered. No need to purchase two separate plates anymore. 96-well volumes as low as 5 µL are achieved from 96-well, PCR plates on the inside of the magnet, while the outside of each magnet will pull beads to well sides in 384-well plates.
ANSI/ SBS Footprint (127.75mm x 85.50mm) to fit into any automated liquid handling robot on bottom. ANSI/SBS footprint on top to accept all common microplates.
Integrated Cushion base for maximum recovery. Helps aid in set-up, robot positioning inconsistencies, and labware consumable inconsistencies
Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads
A040523
384-Well PCR
Maximum – 39 µL
Minimum – 5 µL
__________
96-Well PCR
Maximum – 60 µL (0.2 mL for some beads)
Minimum – 4 µL
Ideal magnet for all of your low volume needs. From Low elution 96-well PCR applications to 384-well, the X396 has you covered. No need to purchase two separate plates anymore. 96-well volumes as low as 5 µL are achieved from 96-well, PCR plates on the inside of the magnet, while the outside of each magnet will pull beads to well sides in 384-well plates.
