Ideal magnet for all of your low volume needs. From Low elution 96-well PCR applications to 384-well, the X396 has you covered. No need to purchase two separate plates anymore. 96-well volumes as low as 4 µL are achieved from 96-well, PCR plates on the inside of the magnet, while the outside of each magnet will pull beads to well sides in 384-well plates.
Detail
Ideal magnet for all of your low volume needs. From Low elution 96-well PCR applications to 384-well, the X396 has you covered. No need to purchase two separate plates anymore. 96-well volumes as low as 4 µL are achieved from 96-well, PCR plates on the inside of the magnet, while the outside of each magnet will pull beads to well sides in 384-well plates.
ANSI/ SBS Footprint (127.75mm x 85.50mm) to fit into any automated liquid handling robot on bottom. ANSI/SBS footprint on top to accept all common microplates.
Integrated Cushion base for maximum recovery. Helps aid in set-up, robot positioning inconsistencies, and labware consumable inconsistencies
Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads
Short term stability: 2-8oC, Long term stability: See individual component labels
Stability:
> 2 years under recommended storage conditions
Analyte:
Lactose
Assay Format:
Spectrophotometer
Detection Method:
Absorbance
Wavelength (nm):
340
Signal Response:
Increase
Linear Range:
1 to 50 µg of lactose (or 0.50 to 25 µg of D-glucose)
Limit of Detection:
1.62 mg/L
Reaction Time (min):
~ 10 min
Method recognition:
AOAC Method 2020.08
The K-LOLAC test kit offers a rapid, novel, sequential measurement of free-glucose and lactose in conventional, low-lactose and lactose-free dairy products. This sequential assay format reduces the manual input required by an analyst when compared to traditional lactose assay formats and therefore improves both accuracy and efficiency. When used in combination with the Megazyme Creep Calculator provided, the β-galactosidase employed in this kit allows for the selective measurement of lactose in the presence of galacto-oligosaccharides (GOS) which are commonly found in lactose-free dairy products. This constitutes a significant improvement over existing commercially available lactose assay kits which typically overestimate lactose content in lactose-free samples due to the unselective hydrolysis of GOS by β-galactosidase. Lastly, the sensitivity of the K-LOLAC assay kit has been doubled through the use of a cascade biochemical pathway, helping to significantly reduce the LOD and LOQ for the assay.
HiPure Bacterial RNA Kit uses silica gel column purification to simplify the extraction. The whole process does not require phenol chloroform extraction and time-consuming alcohol precipitation. The kit is suitable for efficiently extracting RNA from various bacterial samples. The purified RNA can be directly used for RT-PCR, Northern hybridization, etc. The kit has included lysozyme and glass beads, which can be used to treat gram-negative bacteria which is easy to be lysed, as well as gram-positive bacteria which is hard to be lysed, including enterococcus faecalis, staphylococcus, etc.
Details
Specifications
Features
Specifications
Main Functions
Isolation total RNA from bacteria culture
Applications
RT-PCR, Northern blot, poly-A + purification, nucleic acid protection and in vitro translation
Purification method
Mini spin column
Purification technology
Silica technology
Process method
Manual (centrifugation or vacuum)
Sample type
Bacteria culture
Sample amount
Bacteria: <10^9
Elution volume
≥30μl
Time per run
≤40 minutes
Liquid carrying volume per column
800µl
Binding yield of column
100µg
Principle
Hipure silica gel column is based on glass fiber filter membrane with high binding force. Under the condition of high concentration of ionizing agent (such as guanidine hydrochloride or guanidine isothiocyanate), the filter membrane can adsorb nucleic acid through hydrogen bond and electrostatic, while protein and other impurities are not adsorbed and removed. The filter membrane adsorbed with nucleic acid is washed to remove the residual protein and salt. Finally, the nucleic acid adsorbed on the filter membrane can be washed out with low salt buffer (such as buffer TE) or water. The obtained nucleic acid has high purity and can be directly used in various downstream experiments.
Advantages
Fast – several samples can be extracted in 30 minutes
High purity – the purified RNA can be directly used in various downstream applications
High recovery – RNA can be recovered at the level of PG
Good repeatability – silica gel column purification technology can obtain ideal results every time
Broad spectrum – it can deal with various bacteria, including Gram-positive bacteria that are difficult to be lysed
Sufficient components – the kit contains carried lysozyme and glass beads
Kit Contents
Contents
R418101
R418102
R418103
Purification Times
10 Preps
50 Preps
250 Preps
gDNA Filter Mini Columns
10
50
250
HiPure RNA Mini Columns
10
50
250
2ml Collection Tubes
20
100
500
Glass Beads (0.1-0.6mm)
10 g
30 g
150 g
Plastic spoon
2
4
10
Lysozyme
20 mg
90 mg
400 mg
Protease Dissolve Buffer
1.8 ml
1.8 ml
10 ml
Buffer TE
1.8 ml
1.8 ml
5 ml
Buffer STL
5 ml
20 ml
90 ml
Buffer RLC
10 ml
30 ml
150 ml
Buffer RW1
10 ml
50 ml
250 ml
Buffer RW2*
5 ml
20 ml
2 x 50 ml
RNase Free Water
1.8 ml
10 ml
30 ml
Storage and Stability
The kit components can be stored at room temperature (15–25°C) and are stable for at least 18 months under these conditions. Due to the lack of antibacterial agents, RNase Free Water may be contaminated by bacterial or fungal when placed or operated at room temperature. It is recommended to pack and store at 2-8°C to reduce contamination.
Document
HiPure Bacterial RNA Kit uses silica gel column purification to simplify the extraction. The whole process does not require phenol chloroform extraction and time-consuming alcohol precipitation. The kit is suitable for efficiently extracting RNA from various bacterial samples. The purified RNA can be directly used for RT-PCR, Northern hybridization, etc. The kit has included lysozyme and glass beads, which can be used to treat gram-negative bacteria which is easy to be lysed, as well as gram-positive bacteria which is hard to be lysed, including enterococcus faecalis, staphylococcus, etc.
Isolate high quality DNA from a broad variety of phage strains
High yields of total DNA
Fast and easy processing using a rapid spin-column format
No phenol or chloroform extractions or cesium chloride banding required
High yields of DNA recovered3-15 µg DNA from 106-1010 pfu/ mL of enriched phages
This kit provides a rapid spin column method for the purification of total DNA from a broad spectrum of bacteriophages propagated in bacteria grown in liquid cultures. The DNA is isolated without the use of phenol, chloroform or cesium chloride banding procedures. The spin-column based procedure is rapid and can be completed in less than 45 minutes. The kit is highly efficient for processing small volumes of phage supernatant (500 µL – 1 mL) and with the optional DNase and Proteinase K treatments phage DNA yields are maximized while host DNA contamination is minimized. Purified total phage DNA is of the highest integrity, and can be used in a number of downstream applications including PCR, qPCR, Restriction Fragment Length Polymorphism (RFLP), sequencing, cloning, Southern Blot and more.
3-15 µg DNA from 106-1010 pfu/mL of enriched phages
Time to Complete 10 Purifications
45 minutes
* Average yields will vary depending upon a number conditions used and developmental stage.
Storage Conditions and Product Stability All solutions should be kept tightly sealed and stored at room temperature. This kit is stable for 1 year after the date of shipment.
