Ideal magnet for all of your low volume needs. From Low elution 96-well PCR applications to 384-well, the X396 has you covered. No need to purchase two separate plates anymore. 96-well volumes as low as 5 µL are achieved from 96-well, PCR plates on the inside of the magnet, while the outside of each magnet will pull beads to well sides in 384-well plates.
Detail
Ideal magnet for all of your low volume needs. From Low elution 96-well PCR applications to 384-well, the X396 has you covered. No need to purchase two separate plates anymore. 96-well volumes as low as 5 µL are achieved from 96-well, PCR plates on the inside of the magnet, while the outside of each magnet will pull beads to well sides in 384-well plates.
ANSI/ SBS Footprint (127.75mm x 85.50mm) to fit into any automated liquid handling robot on bottom. ANSI/SBS footprint on top to accept all common microplates.
Integrated Cushion base for maximum recovery. Helps aid in set-up, robot positioning inconsistencies, and labware consumable inconsistencies
Features include solid aluminum alloy construction and hard coat anodized finish for years of trouble-free use, and compatible with any magnetic beads
Microcystin are a class of hepatotoxins produced by blue-green algae such as Microcystis aeruginosa. Microcystin-LR is the most common of the over 50 different congeners. Cyanobacteria can produce microcystin in large quantities during an algae bloom which then pose a major threat.
This kit can be used for Congener-Independent quantitative test of Microcystin in liquid samples such as drinking, ambient and waste water and algal cultures.
Additional Quality Control, Calibration Verification, and Spiking Solution materials can be obtained separately in optional Supplemental Pack for Method 546 (catalog # EL2024-Q).
Microcystin-LR
Informational sign postings about HABs at recreational waters: < 6 μg/L
Recreational public health advisory: 6 μg/L
Elevated recreational public health advisory (e.g. no contact): 20 μg/L
EPA 10-day drinking water health advisories:
Do Not Drink – 0.3 μg/L for bottle fed infants and preschool children, pregnant and nursing woman, elderly immunocompromised and liver conditions.
Do Not Drink – 1.6 μg/L for school-age children to adults.
Do not Use – 20 μg/L
Document
Format: 96-well microtiter plate (12 test strips of 8 wells) Standards: 0 | 0.15 | 0.4 | 1 | 2 | 5 ppb Incubation Time: 75 Minutes Compatible for use with US EPA Method 546
RNA/microRNA/DNA/Proteins are preserved for more than 2 years at room temperature in Norgen’s Urine Preservative
Compatible with most DNA, Total RNA, microRNA and protein isolation methods
Preservative is available in a single dose liquid format (ampule)
Preservative is also available in a dried format in tubes – Urine Collection and Preservation Tubes
Urine Collection and Preservation Devices are available in 4 convenient sizes: 5 cc tubes, 15 cc tubes, 50 cc tubes, and 120 cc cups
Norgen’s Urine Preservative is designed for the rapid preservation of DNA, RNA, microRNA and proteins from fresh urine samples. In addition, the Urine Preservative eliminates the need to immediately process or freeze samples and allows the samples to be shipped to centralized testing facilities at ambient temperatures. The components of the Urine Preservative allow samples to be stored for over 2 years at room temperature with no detected degradation of urine DNA, RNA or proteins.
Norgen’s Urine Preservative is available in 2 convenient formats:
1. Urine Preservative Single Dose Ampules With this product Norgen’s Urine Preservative is supplied in a liquid format in single dose ampules. The user simply collects 5 – 50 mL of urine into a urine collection container and adds the contents of the Urine Preservative Single Dose (Cat# 18126). The urine and preservative are then mixed, and the urine nucleic acids and proteins are preserved at room temperature.
2. Urine Collection and Preservation Tubes Norgen’s Urine Preservative is also available in a dried format in Norgen’s Urine Collection and Preservation Tubes. The user simply collects urine into the tubes and mixes gently until the orange preservative pellet in the tube has dissolved. Norgen’s Urine Collection and Preservation Tubes are available in 3 convenient sizes:
Select Urine Tested with the Norgen Urine Collection and Preservation Tubes
Human Mouse Lynx Wolf Urine collected from snow
Available Sizes and Formats
Urine Collection and Preservation Tubes (5 cc) – Urine inputs from 1 – 5 mL
Storage Conditions and Product Stability All tubes should be kept tightly sealed and stored at room temperature (15 – 25°C) for up to 2 years without any reduction in performance.
Kit Components
Cat. 18118 (50 tubes)
Cat. 18122 (50 tubes)
Cat. 18113 (50 tubes)
Cat. 18126 (50 tubes)
Cat. 18129 (1 cup)
Urine Collection and Preservation Tubes (5 cc)
50
–
–
–
–
Urine Collection and Preservation Tubes (15 cc)
–
50
–
–
–
Urine Collection and Preservation Tubes (50 cc)
–
–
50
–
–
Urine Preservative Single Dose
–
–
–
50
–
Urine Collection and Preservation Cup (120 cc)
–
–
–
–
1
ID Labels
50
–
–
50
–
Product Insert
1
1
1
1
1
Document
Norgen’s Urine Preservative is designed for the rapid preservation of DNA, RNA, microRNA and proteins from fresh urine samples. In addition, the Urine Preservative eliminates the need to immediately process or freeze samples and allows the samples to be shipped to centralized testing facilities at ambient temperatures. The components of the Urine Preservative allow samples to be stored for over 2 years at room temperature with no detected degradation of urine DNA, RNA or proteins.
Norgen’s Urine Preservative is available in 2 convenient formats:
The RNA Clean Beads use paramagnetic bead technology for high-throughput purification of RNA or cDNA from in vitro applications such as transcription, antisense RNA (aRNA) amplification and RNA and cDNA probe synthesis. The resulting purified product can be used in the following applications: PCR and RT-PCR, probes for microarray or macroarray, RNase protection assays, transfection for RNAi experiments and cDNA synthesis and labeling.
Details
Specifications
Features
Specifications
Main Functions
Recovery of RNA from RNA reaction solution by magnetic bead method (Replace Beckmen RNAClean XP)
Applications
Advanced applications, such as sequencing, genechip, fluorescence quantification, etc.
Purification technology
Magnetic beads technology
Process method
Manual or automatic
Sample type
RNA products, restriction endonuclease systems, or other enzymatic reaction solutions
Sample amount
20-100µl
Recovery
90%
Elution volume
≥20μl
Operation time
≤50 minutes
Principle
RNA Clean utilizes an optimized buffer to selectively bind RNA or cDNA to paramagnetic beads. Excess oligonucleotides, nucleotides, salts, and enzymes can be removed using a simple washing procedure.
Advantages
High recovery – recovery of RNA up to 90%
High throughput – using magnetic beads purification technology
Store at 4℃ upon arrival, for up to 12 months. For best results shake the reagent well until all of the beads are completely in suspension and aliquot RNAClean Beads into RNase free containers. Do not pour remaining reagent back into the storage container. Mix RNAClean Beads well before use. The reagent should appear homogenous and consistent in color.
DO NOT FREEZE.
Document
The RNA Clean Beads use paramagnetic bead technology for high-throughput purification of RNA or cDNA from in vitro applications such as transcription, antisense RNA (aRNA) amplification and RNA and cDNA probe synthesis. The resulting purified product can be used in the following applications: PCR and RT-PCR, probes for microarray or macroarray, RNase protection assays, transfection for RNAi experiments and cDNA synthesis and labeling.
