XTL-20 series metallographic microscopes are equipped with infinity plan achromatic stress-free metallographic objective lens and Wide-angle eyepiece, with the characteristics of beautiful appearance, clear imaging, broad vision, convenient operation and so on, etc. It can be widely used in biology, medicine, industry, agriculture and other fields, and is an ideal instrument for medical, teaching, scientific research and other units
Model:
XTL-20
Brand:
Yingtai
Detail
*Optical system:equipped with infinity plan achromatic stress-free metallographic objective lens,built-in polarizing ober-vation device
*Observationhead device:The lens barrel can be rotated 360 degrees,and the interpupillary distance adjustment range is 50-75MM
The Aflatoxin M1 plate kit is a competitive enzyme-labeled immunoassay. The Aflatoxin M1 sample extract and calibrators are pipetted into the test wells followed by the Aflatoxin M1 antibody into the test wells to initiate the reaction. During the 30 minutes incubation period, Aflatoxin M1 from the sample and Aflatoxin M1 antigen compete for binding to the Aflatoxin M1 antibody. The Aflatoxin M1 antibody is captured on the walls of the test well. Following this 30-minute incubation, the contents of the wells are removed and the wells are washed to remove any unbound Aflatoxin M1 and free Aflatoxin M1 antibody. After wash, 1X HRP-conjugated Antibody#2 is added for 30 minutes incubation. The wells are washed afterwards, and a clear substrate is then added to the wells and any bound enzyme conjugate causes the conversion to a blue color. Following a 15-minute incubation, the reaction is stopped and the amount of color in each well is read. The color of the unknown samples is compared to the color of the calibrators and the Aflatoxin M1 concentration of the samples is derived.
Short term stability: 2-8oC, Long term stability: See individual component labels
Stability:
> 2 years under recommended storage conditions
Analyte:
myo-Inositol
Assay Format:
Spectrophotometer
Detection Method:
Absorbance
Wavelength (nm):
492
Signal Response:
Increase
Linear Range:
2 to 35 µg of myo-inositol per assay
Limit of Detection:
0.8 mg/L
Reaction Time (min):
~ 30 min
Application examples:
Animal feeds, food and other materials.
Method recognition:
Novel method
The myo-Inositol Assay Kit is a reliable and accurate enzymatic UV-method for the specific measurement and analysis of myo-inositol in animal feeds, foods and various other materials.
Phytic acid content of samples with very low levels of free myo-inositol can also be determined using K-INOSL. This can be achieved by measuring the amount of myo-inositol released after de-phosphorylation of phytic acid with the enzymes phytase and alkaline phosphatase, as used with the Megazyme Phytic Acid/Total Phosphorus Assay Kit (K-PHYT).
Not suitable for the determination of myo-inositol in baby formula.
Note for Content: The number of manual tests per kit can be doubled if all volumes are halved. This can be readily accommodated using the MegaQuantTM Wave Spectrophotometer (D-MQWAVE).
All reagents stable for > 2 years after preparation
Only enzymatic kit available
Rapid reaction
Mega-Calc™ software tool is available from our website for hassle-free raw data processing
Standard included
Document
The myo-Inositol Assay Kit is a reliable and accurate enzymatic UV-method for the specific measurement and analysis of myo-inositol in animal feeds, foods and various other materials.
Short term stability: 2-8oC, Long term stability: See individual component labels
Stability:
> 2 years under recommended storage conditions
Analyte:
Fructan
Assay Format:
Spectrophotometer
Detection Method:
Absorbance
Wavelength (nm):
410
Signal Response:
Increase
Linear Range:
2.3 to 55 µg of D-fructose or D-glucose per assay
Limit of Detection:
0.16 g/100 g
Total Assay Time:
~ 90 min
Application examples:
Flours, infant formula, animal feed, pet foods, plant materials (e.g. onion), food products and other materials
Method recognition:
AACC Method 32-32.01, AOAC Method 999.03, AOAC Method 2016.14, AOAC Method 2018.07 and CODEX Method Type III
The Fructan Assay Kit is suitable for the specific measurement of fructan in plant extracts, animal feed and food products containing starch, sucrose and other sugars. It is used in three validated methods for the determination of fructan: AOAC method 999.03 (foods), AOAC method 2018.07 (Animal Feed) and AOAC method 2016.14 (infant formula and adult nutritionals).
New, improved procedure.
In the most recent development, a recombinant endo-levanase has been incorporated into the fructanase mixture, extending the use of the method to the measurement of levan-type fructans as are present in grasses such as timothy, cocksfoot, ryegrass and red fescue.
The method described in this booklet employs ultra-pure, recombinant enzymes and specifically measures fructans including inulin-type fructans from chicory, dahlia, jerusalem artichoke; highly branched fructans from onion and wheat stems and leaves; and levan-type fructans from pasture grasses such as timothy grass. The enzymes employed are completely devoid of contaminating enzymes active on β-glucan or gluco-oligosaccharides.
All kit reagents stable for > 2 years after preparation
Unaffected by high sucrose / reducing sugar concentrations
Fructan kits are only available from Megazyme
Simple format
Mega-Calc™ software tool is available from our website for hassle-free raw data processing
Standard included
Document
The Fructan Assay Kit is suitable for the specific measurement of fructan in plant extracts, animal feed and food products containing starch, sucrose and other sugars. It is used in three validated methods for the determination of fructan: AOAC method 999.03 (foods), AOAC method 2018.07 (Animal Feed) and AOAC method 2016.14 (infant formula and adult nutritionals).