[TP1000] ExcelTaq™ Taq DNA Polymerase, 5 U/μl, 500 U

Description

Specifications

Clone	IHC583
Source	Mouse Monoclonal
Positive Control	Breast Carcinoma, Urothelial Carcinoma
Dilution Range	1:200

Permagen’s 0.2 mL PCR / 1.5 mL Microcentrifuge tube separation rack is designed for labs with both PCR strip and 1.5 mL separation protocols. On the top, hold up to two of either 8 or 12 strips, or up to 24 individual tubes. Flip over and hold up to twelve 1.5 mL Microcentrifuge Tubes

Features include solid aluminum alloy design with hard coat finish for years of trouble-free use, rubber feet on both sides to help prevent slipping on work bench, less tippy than common plastic products, and fast separations using any magnetic beads

SKU #

MSR1224B

Features

• Aluminum alloy design for years of trouble-free use
• Fast magnetic bead separations
• Held to tighter tolerances for more consistent results
• Pulls beads to side of wells for easy tip tracking down opposite side
• Rubber feet to help prevent slippage
• Stable design
• Angled tube holes which allow the tubes to come close to magnets

Compatibility

• Most 1.5 mL Microcentrifuge tubes
• Some 2.0 mL Microcentrifuge tubes
• 8-strip PCR tubes
• 12-strip PCR tubes
• Individual PCR tubes 
• Any Magnetic Beads

Volumes

Minimum Volume 0.2 mL PCR Tube – 10 µL

Maximum Volume 0.2 mL PCR Tube – 0.2 mL

____________________________________________

Minimum Volume 1.5 mL Microcentrifuge Tube – .5 mL

Maximum Volume 1.5 mL Microcentrifuge Tube – 1.5 mL

Overview

• All-in-one solution for inclusion body protein isolation and purification
• Fast and convenient spin column protocol
• Complete kit with Cell Lysis Reagent, Inclusion Body Solubilization Reagent, buffers and spin columns to purify proteins
• Purification is based on spin column chromatography that uses Norgen’s resin separation matrix

These kits provide everything required to isolate and purify inclusion body proteins from induced bacterial cultures. First a proprietary Cell Lysis Reagent is used to selectively lyse the cells and release inclusion bodies in their solid form. Next, inclusion bodies are dissolved and their contents released using the provided IB Solubilization Reagent. Inclusion body proteins are then further purified using spin columns for rapid and convenient buffer exchange and desalting. This kit provides a convenient way to screen recombinants prior to scaling up.

ProteoSpin™ Inclusion Body Protein Isolation Micro Kit

The process is efficient and streamlined and can process up to 12 samples in only 60 minutes. Each spin column is able to recover up to 50 µg of acidic or basic proteins. Purified recombinant proteins are then ready for SDS-PAGE, 2D gels, Western blots, Mass Spectrometry analysis, and other applications.

ProteoSpin™ Inclusion Body Protein Isolation Maxi Kit

The procedure is efficient and streamlined and can process up to 4 samples in approximately 2 hours. Each spin column is able to recover up to 12 mg of acidic or basic proteins from 100 mL of induced bacterial culture. Purified recombinant proteins are then ready for SDS-PAGE, 2D gels, Western blots, Mass Spectrometry analysis, and other applications.

About Inclusion Bodies

Bacteria are widely used for the expression of different proteins. However, 70-80% of the proteins expressed in bacteria by recombinant techniques are typically contained in insoluble inclusion bodies (i.e., protein aggregates). The protein of interest found in these subcellular structures is often inactive, due to incorrect folding. The production rate of recombinant proteins stored in inclusion bodies is invariably higher than those synthesized as soluble proteins. The reason behind this is thought to be the resistance of insoluble proteins to proteolysis by cellular enzymes. In addition, separation of insoluble recombinant proteins in inclusion bodies is considerably easier than that of soluble proteins. These factors have been the major influences favoring scale-up of high-value proteins using bacterial fermentation for example. Procedures for the purification of the expressed proteins from inclusion bodies are often labour-intensive, time-consuming and not cost-effective. This kit provides the essential reagents for cell disruption, inclusion body solubilization and purification using spin column chromatography – all optimized to work together thereby simplifying the process and saving a tremendous amount of time and cost.

Details

Supporting Data

Figure 1 / 5

Previous

Next

Click for expanded view

Kit Specifications
Maximum Culture Volume	1.5 mL
Yield from 1.5 mL	Up to 50 μg
Minimum Elution Volume	30 μL
Time to Process 12 Samples	60 minutes

Storage Conditions

The Cell Lysis Reagent and IB Solubilization Reagent should be stored at 4°C upon receipt of this kit. All other solutions should be kept tightly sealed and stored at room temperature. This kit is stable for 2 years after the date of shipment. Once opened, the solutions should be stored at 4°C when not in use except for the pH Binding Buffers (Acidic and Basic). Some precipitation will occur with 4°C storage. This precipitation should be dissolved with slight heating to room temperature before using.

Component	Cat. 10300 (Micro – 25 preps)	Cat. 17700 (Maxi – 4 preps)
Wash Solution C	30 mL	130 mL
Wash Solution N	30 mL	130 mL
Binding BUffer A	4 mL	20 mL
Binding Buffer N	4 mL	20 mL
Elution Buffer C	8 mL	2 x 30 mL
Protein Neutralizer	4 mL	4 mL
Cell Lysis Reagent	15 mL	110 mL
IB Solubilization Reagent	2 mL	50 mL
Syringes, 1cc, slip tip	25	–
Needles (Bev, 20G x 1 inch)	25	–
Syringes, 10 mL, Luer-Lok™ Tip	–	4
Needles (18G x 1.5 inch)	–	4
Micro Spin Columns	25	–
Maxi Spin Columns (filled with SiC) inserted into 50 mL collection tubes	–	4
Collection Tubes	25	–
Elution Tubes (1.7 mL)	25	–
Elution Tubes (50 mL)	–	4
Product Insert	1	1