Large Capacity Refrigerated Centrifuge

Overview

• High yield and high purity DNA ready for any application
• Available in a variety of formats to properly suit your needs
• Compatible with blood collected on a variety of commercially available tubes

These kits allow for the isolation of DNA from the blood of various species, including humans and will recover genomic DNA, mitochondrial DNA, viral DNA and bacterial DNA. The purified DNA is of excellent quality and yield and completely compatible with any downstream application including PCR, qPCR and genotyping.

Blood DNA Isolation Mini Kit

Norgen’s Blood DNA Isolation Mini Kit is designed for the rapid preparation of DNA from up to 200 µL of whole blood using a rapid spin column protocol. Preparation time for a single sample is less than 30 minutes and each kit contains sufficient materials for 50 preparations.

Blood DNA Isolation Midi Kit

Norgen’s Blood DNA Isolation Kit is designed for the rapid spin column preparation of DNA from 0.3 to 2 mL volumes of whole blood. Preparation time for a single sample is less than 30 minutes, and each kit contains sufficient materials for 20 preparations.

Blood DNA Isolation Maxi Kit

This kit is designed for the rapid preparation of DNA from 3 mL up to 10 mL of whole blood. Preparation time for a single sample is less than 30 minutes.

Blood DNA Isolation 96-Well Kit (High Throughput)

This kit provides a rapid method for the high-throughput isolation of DNA from up to 200 µL of whole blood. Fast and easy processing using either a vacuum manifold or centrifugation.

Blood DNA Isolation Kit (Magnetic Bead System)

Norgen’s Blood DNA Isolation Kit (Magnetic Bead System) is designed for the rapid preparation of genomic DNA from up to 200 µL of whole blood from various species, including human. Purification is based on magnetic beads as the separation matrix. Norgen’s magnetic beads bind DNA under optimized salt concentrations and releases the bound DNA under low salt and slightly alkali conditions. The genomic DNA is preferentially purified from other cellular proteinaceous components. Typical yields of genomic DNA will vary depending on the cell density of the blood sample. The purified genomic DNA is fully digestible with all restriction enzymes tested, and is completely compatible with downstream applications including real-time PCR, NGS and microarray analysis.

Blood DNA Isolation 96-Well Kit (High Throughput Magnetic Bead System)

96-well format for high throughput applications. Purification with the 96-well plates can be integrated with a robotic automation system.

Details

Supporting Data

Figure 1 / 19

Previous

Next

Click for expanded view

Kit Specifications
Minimum Blood Input	20 µL
Maximum Blood Input	200 µL
Column Binding Capacity	> 50 µg
Average Yield (200 µL of blood)	4-12 µg*
Time to Complete 10 Purifications	30 minutes

*Yield will vary depending on the type of blood processed

Storage Conditions and Product Stability
All solutions should be kept tightly sealed and stored at room temperature. This kit is stable for 1 year after the date of shipment. The kit contains a ready-to-use Proteinase K, which is dissolved in a specially prepared storage buffer. The buffered Proteinase K is stable for up to 1 year after the date of shipment when stored at room temperature.

Component	Cat. 46300 (50 preps)	Cat. 46380 (100 preps)	Cat. 51400 (20 preps)	Cat. 31200 (12 preps)	Cat. 46350 (192 preps)	Cat. 59800 (50 preps)	Cat. 62600 (192 preps)
Lysis Buffer B	20 mL	2 x 20 mL	2 x 40 mL	2 x 110 mL	2 x 40 mL	20 mL	1 x 40 mL 1 x 20 mL
Solution WN	18 mL	2 x 18 mL	55 mL	55 mL	55 mL	18 mL	55 mL
Wash Solution A	18 mL	2 x 18 mL	2 x 38 mL	2 x 38 mL	2 x 38 mL	–	–
Elution Buffer B	30 mL	2 x 30 mL	30 mL	30 mL	2 x 30 mL	15 mL	1 x 30 mL 1 x 15 mL
Proteinase K in Storage Buffer	1.2 mL	2 x 1.2 mL	4.4 mL	8 mL	4.5 mL	1.2 mL	4 mL
Magnetic Bead Suspension	–	–	–	–	–	2 x 1.1 mL	8.5 mL
Maxi Spin Columns	–	–	–	12	–	–	–
Mini Spin Columns	50	100	–	–	–	–	–
Midi Spin Columns	–	–	20	–	–	–	–
96-Well Plate	–	–	–	–	2	–	2
Adhesive Tape	–	–	–	–	4	–	2
Collection Tubes	50	100	20	12	–	–	–
96-Well Collection Plate	–	–	–	–	2	–	–
Elution Tubes	50	100	20	12	–	50	–
96-Well Elution Plate	–	–	–	–	2	–	2
Product Insert	1	1	1	1	1	1	1

Overview

• Detection kits for the HPV 6/16
• Available in TaqMan format for analysis

More than 70 types of human papillomavirus (HPV) have been identified, and are generally classified as high-risk or low-risk depending on their relationship or lack of relationship with cancer and high-grade cervical intraepithelial neoplasia (CIN 2-3). HPV viruses are predominantly sexually transmitted and high-risk HPV types are a major risk factor for development of cervical cancer. HPV 16 has been considered as a high-risk cancer associated HPV type. The low-risk HPV type 6 has been associated with the presence of genital warts. There are many other low-risk HPV types that are not associated with genital warts or cervical cancer. Until now, HPV cannot be cultured in vitro, and immunological tests are inadequate to determine the presence of HPV cervical infection. On the other hand, biopsies can be analyzed by nucleic acid hybridization to directly detect the presence of HPV DNA.

HPV 6/16 TaqMan PCR Kit, 100 reactions

• Ready to use format, including Master Mix for the target and PCR control to monitor for PCR inhibition and validate the quality
• Specific Primer and Probe mix for the pathogen/virus/viroid of interest
• Primer and Probe mix
• Positive and negative control to confirm the integrity of the kit reagents

HPV 6/16 TaqMan PCR Probe/Primer Set and Controls, 100 reactions

• Specific Primer/Probe mix and Positive Control for the pathogen/virus/viroid of interest
• Nuclease-free water
• Can be used together with Norgen’s PCR Master Mix (#28007) or customer supplied master mix

For research use only and NOT intended for in vitro diagnostics.

Details

Supporting Data

Figure 1 / 5

Previous

Next

Click for expanded view

Storage Conditions and Product Stability
All kit components can be stored for 2 years after the date of production without showing any reduction in performance.

All kit components should be stored at -20°C upon arrival.

Component	TaqMan Probe Cat. TM42050 (100 preps)	TaqMan Probe/Primer and Control Set Cat. TM42010 (100 preps)
MDx TaqMan 2X PCR Master Mix	2 x 700 µL	–
HPV 6/16 Primer & Probe Mix	280 µL	280 µL
HPV 6/16 Positive Control	150 µL	150 µL
Nuclease-Free Water (Negative Control)	1.25 mL	1.25 mL
Product Insert	1	1

Description 

The ExcelTaq™ Blood Direct DNA Polymerase is designed for amplifying targeted DNA directly from whole blood, eliminating the need for a lengthy DNA isolation process. ExcelTaq™ Blood Direct DNA Polymerase is highly tolerant in the presence of PCR interfering/ inhibiting substances in blood, such as IgG, hemoglobin, and lactoferrin. ExcelTaq™ Blood Direct DNA Polymerase is compatible with most anticoagulants, such as citrate, EDTA, and heparin (Fig. 1). The ExcelTaq™ Blood Direct DNA Polymerase includes a pair of Positive Control Primers (CCR5) that are compatible with primate blood samples.

Features

• 5’→3′ DNA polymerase activity
• No detectable 3’→5′ exonuclease (proofreading) activity
• Generates PCR products with 3′-dA overhangs
• Compatible with most anticoagulants 

Applications 

• Direct amplification of DNA from blood samples
• High throughput screening without DNA purification
• Suitable for multiplex PCR

Storage

-20°C for 24 months

   4℃ for 6 months

The ExcelTaq™ Blood Direct DNA Polymerase is designed for amplifying targeted DNA directly from whole blood, eliminating the need for a lengthy DNA isolation process. ExcelTaq™ Blood Direct DNA Polymerase is highly tolerant in the presence of PCR interfering/ inhibiting substances in blood, such as IgG, hemoglobin, and lactoferrin. ExcelTaq™ Blood Direct DNA Polymerase is compatible with most anticoagulants, such as citrate, EDTA, and heparin (Fig. 1). The ExcelTaq™ Blood Direct DNA Polymerase includes a pair of Positive Control Primers (CCR5) that are compatible with primate blood samples.