Overview

Transparent perforated gas permeable film which is peelable, pierceable and suitable for cell culture.

• Our QuickSeal Gas Perm self-adhesive seal is made from an EVA medical tape and is designed for use in cell culture, due to its porous nature
• The seal is compatible with polypropylene, polystyrene, polyethylene and COC
• It can be removed by peeling, or it can be pierced with a pipette tip manually, or using a liquid handling robot.
• QuickSeal Gas Perm can be utilized for effective overnight incubations, during which it demonstrates significant reductions in evaporation compared to lids
• For all adhesive seals, the best sealing results are achieved using our Hand Roller or KAPS 500 Auto Sealer

Transparent perforated gas permeable film which is peelable, pierceable and suitable for cell culture.

Introduction

Free-circulating nucleic acids, such as tumor-specific extracellular DNA fragments and mRNAs in the blood or fetal nucleic acids in maternal blood, are present in serum or plasma usually as short fragments, <1000bp (DNA). HiPure Circulating DNA Midi Kit enables efficient purification of these circulating nucleic acids from human plasma, serum, or urine. The extracted products can be used for clinical in vitro detection.

Details

Specifications

Features	Specifications
Main Functions	Isolation circulating DNA from 1-5ml plasma, serum, body fluids using vacuum protocol
Applications	qPCR, liquid or solid chip analysis, hybridization and SNP detection, etc.
Purification method	Mini spin column
Purification technology	Silica technology
Process method	Manual (vacuum)
Sample type	Serum, plasma and other cell-free fluid samples
Sample amount	1-5ml
Elution volume	≥50μl
Time per run	≤60 minutes
Liquid carrying volume per column	4ml
Binding yield of column	1mg

Principle

This product is based on silica Column purification. The sample is lysed and digested with lysate and protease, DNA is released into the lysate. Transfer to an adsorption column. Nucleic acid is adsorbed on the membrane, while protein is not adsorbed and is removed with filtration. After washing proteins and other impurities, Nucleic acid was finally eluted with low-salt buffer.

Advantages

• High yield – most optimal process, free DNA (>50bp) can be obtained to the maximum extent
• High concentration – low elution volume, ensuring high nucleic acid concentration
• High purity – low alcohol binding method, completely removing inhibitor and protein pollution
• High recovery – DNA can be recovered at thelevel of PG by silica gel column purification

Kit Contents

Contents	IVD3182
Purification Times	50
Buffer ACL	250 ml
Buffer ACB*	300 ml
Buffer DCW1*	22 ml
Buffer DCW2*	10 ml
Proteinase K	540 mg
Protease Dissolve Buffer	30 ml
Carrier RNA	110 μg
Nuclease Free Water	20 ml
HiPure CFDNA Mini Columns	50
2 ml Collection Tubes	100
Extender Tube	50
Vac-Connector	50

Storage and Stability

Proteinase K, Carrier RNA should be stored at 2-8°C upon arrival. However, short-term storage (up to 12 weeks) at room temperature (15-25°C) does not affect their performance. The remaining kit components can be stored dry at room temperature (15-25°C) and are stable for at least 18 months under these conditions. The entire kit can be stored at 2-8°C, but in this case buffers should be redissolved before use. Make sure that all buffers are at room temperature when used.

Experiment Data

Free-circulating nucleic acids, such as tumor-specific extracellular DNA fragments and mRNAs in the blood or fetal nucleic acids in maternal blood, are present in serum or plasma usually as short fragments,

Overview

• Detection kits for Legionella sp.
• CE-IVDD marked in accordance with the European Commission Directive 98/79/EC.
• Research version available

Legionella sp. TaqMan PCR Kit Dx, 24 reactions

• Ready to use format, including Master Mix for the target and PCR control to monitor for PCR inhibition and validate the quality
• Specific Primer and Probe mix for the pathogen/virus/viroid of interest
• Primer and Probe mix
• Positive and negative control to confirm the integrity of the kit reagents

Details

Supporting Data

Figure 1 / 3

Previous

Next

Click for expanded view

Storage Conditions

The Legionella sp. TaqMan PCR Kit Dx is shipped on dry ice. The components of the kit should be frozen upon arrival. If one or more of the components is not frozen when the kit is received, or if any of the components have been compromised during shipment, please contact Norgen Biotek for assistance. All kit components should be stored at -20°C upon arrival. Repeated thawing and freezing (> 3 x) of the Master Mix and Positive Control should be avoided, as this may affect the performance of the assay. If the reagents are to be used only intermittently, they should be frozen in aliquots.

Component	Cat. DxTM64400 (24 rxns)
MDx TaqMan 2X PCR Master Mix	550 μL
Legionella sp. Primer & Probe Mix Dx	2 x 70 μL
Legionella sp. Positive Control Dx – 200,000 copies/μL	50 μL
Nuclease-Free Water	2 x 1.25 mL
Product Insert	1