Introduction

This product provides a fast and easy way to purify DNA from plant and fungal tissue. Up to 3g of tissue can be processed. Easy-to-use Plant procedures provide pure total DNA (genomic, mitochondrial, and chloroplast) for reliable PCR and southern blot in less than 1 hour.

Details

Specifications

Principle

This product is based on silica Column purification. Plant material is first mechanically disrupted and then lysed by addition of lysis buffer and incubation. RNase A in the lysis buffer digests the RNA in the sample. After lysis, proteins and polysaccharides are salt-precipitated. Binding buffer and ethanol are added to the cleared lysate to promote binding of the DNA to the HiPure membrane. The sample is then applied to a column and then centrifuged.DNA binds to the membrane, while contaminants such as proteins and polysaccharides are efficiently removed by 2 wash steps. Pure DNA is eluted in a small volume of low-salt buffer or water.

Advantages

• Broad spectrum – suitable for extracting DNA from various plant samples
• Fast – several samples can be extracted in 30 minutes by silica technology
• High purity – high quality DNA, completely remove inhibitors
• High yield – silica technology can achieve the highest yield

Kit Contents

Storage and Stability

RNase A should be stored at 2-8°C upon arrival. However, short-term storage (up to 12 weeks) at room temperature (15-25°C) does not affect its performance. The remaining kit components can be stored dry at room temperature (15-25°C) and are stable for at least 18 months under these conditions. The entire kit can be stored at 2-8°C, but in this case buffers should be redissolved before use. Make sure that all buffers are at room temperature when used.

Purchase Guide

This product provides a fast and easy way to purify DNA from plant and fungal tissue. Up to 3g of tissue can be processed. Easy-to-use Plant procedures provide pure total DNA (genomic, mitochondrial, and chloroplast) for reliable PCR and southern blot in less than 1 hour.

Product Description

Rapid Isothermal Nucleic Acid Amplification Kit For Lab Use

Product Detail

Kit Storage and term of Validity

Storage term: stored at ≤-20℃,keep away from light, avoid heavy weight and repeated freezing and thawing.

Term of Validity: 14 months

Isothermal nucleic acid Principle Summary

This kit is based on a rapid nucleic acid amplification technology at room temperature and constant temperature: at room temperature and constant temperature (generally 39℃~42℃), reverse transcriptase uses specific primers and template RNA to synthesize cDNA strands, and binds the auxiliary protein and single strand With the help of the protein, the recombinase and the primer form a complex;perform a homology search and bind the target homology domain,at this time a D-loop region is formed at the homology position and strand exchange begins; accompanied by the recombinase from the complex Upon dissociation,the polymerase also binds to the 3′ end of the primer, initiating chain extension. At the same time, relying on the function of exonuclease, adding specific molecular probes designed according to the template, and using fluorescence monitoring equipment can realize real-time monitoring of the amplification process of the target fragment.

Isothermal nucleic acid Product Features

1/ High sensitivity and specificity, short reaction time.

2/ The reagent form is freeze-dried, stable and easy to operate.

3/ The reaction can be operated by metal bath and water bath pot without purchasing expensive PCR apparatus.

Technical Parameters:

Isothermal nucleic acid Applications

Suitable for RNA isothermal rapid amplification kit(Fluorescent type)

Primer: Require pair of nucleotide primers with the length of 25-35 bp.

RNA fluorescent kit reaction temperature is 39 to 42℃ and time is 5-20 minutes.

Notes

1/ Please avoid nucleic acid contamination and set blank control during reaction due to the high sensitivity of the kit.

2/ Please take out the required quantity of MIRA reaction units for the experiment, and put the rest under storage conditions when performing the experiment.

Safety Features

1. User-Friendly Design: The chamber lid and tabletop are covered with heat-insulating resin materials, providing both protection against burns and an aesthetically pleasing appearance. The upward-opening flip-top door saves space, while the rounded corners prevent injury. The specially designed steam discharge and collection system minimizes steam burn risks and enhances operational convenience.

2. Interlock Mechanism and Safety Protection: The safety interlock system is designed to be more sensitive and secure. The chamber lid cannot be opened if there is pressure or steam inside the chamber. The lid can only be opened when the pressure gauge reads “0” MPa. The sterilizer will not start heating if the chamber lid is not properly locked. These features enhance the overall safety of the machine.

3. Over-temperature and Heating Protection: The system continuously monitors the temperature inside the sterilization chamber. If the temperature becomes too high or heating is abnormal, power will be automatically cut off to prevent overheating.

4. Automatic Fault Detection System: The machine performs an automatic self-check when powered on. If a fault occurs during operation, an audible alarm will sound, and a fault code will be displayed.

5. Lid Closure Check System: The system automatically detects whether the chamber lid is securely locked. If the lid is not properly locked, the sterilizer will not start.

6. Leakage, Over-current, and Short-Circuit Protection: If there is leakage in the heating elements or other components, or if over-current or short-circuit conditions occur, the system will automatically cut off power to prevent user injury.

7. Water Shortage and Independent Dry-Burning Protection: Equipped with a low water level sensor and independent dry-burning protection device, the system can monitor the water level in the chamber in real-time to prevent dry burning and avoid false readings. If the low water level sensor fails, the overheat and dry-burning protection system will automatically activate, cut off power to the heating ring, and sound an alarm to ensure safety.

8. Dual Pressure Protection: The system includes both a mechanical safety valve and an electronic over-pressure protection system. If pressure becomes abnormal, the system will relieve pressure and cut off power while sounding an alarm.

9. Back end Safety Testing: The system can be periodically tested for safety and protective measures.

10. Over-pressure Testing: Regular testing ensures that the instrument’s over-pressure protection system can automatically cut off power or that the safety valve can open to relieve pressure.

11. Performance Testing: The instrument’s safety performance has been tested by national authorized inspection agencies, and a test report is available.

Technical Parameters

Note: The upper limits for cooling lock door temperature and exhaust temperature are related to the boiling point.

Other Optional Accessories

1. Dot Matrix Printer: Capable of printing temperature, time, F0 value, and pressure data. USB data export and curve plotting.

2. Stainless Steel Basket with Base.

3. Pressure Sensor

4. Stainless Steel Bucket

5. Item Thermometer

6. 3Q Validation Adapter

Features and functions:

1. Large-diameter sterilization chamber：The 40 cm large-diameter sterilization chamber provides an exceptionally spacious environment to meet a wide range of sterilization needs.

2. Sterilization temperature：105-138℃.

3. Exhaust control ：After sterilization is complete, the exhaust valve can automatically open to release the exhaust at a pre-set temperature.

4. Verification interface: Provides temperature and pressure inspection ports for easy calibration.

5. Saturated steam monitoring：The system automatically monitors the expulsion of cold air to ensure a pure steam sterilization environment, guaranteeing optimal sterilization effectiveness.

6. Pressure performance：The chamber is designed to withstand a pressure of up to 0.35 MPa, and each unit is tested with a water pressure of up to 0.44 MPa. Advanced pressure protection ensures the safety load of the equipment.

7. Intelligent control system:The microcomputer chip-based intelligent control system monitors the temperature and pressure inside the sterilization chamber in real-time. The chamber lid can only be opened under safe temperature and pressure conditions. The system also provides fully automatic control of the sterilization process and allows for convenient maintenance, inspection, calibration, recording, and future upgrades.

8. Six preset programs:Includes six fixed programs for liquid sterilization and holding, solid sterilization and drying, agar melting and holding, and waste sterilization.

9. Memory storage system:Users can set their own parameters, create multiple programs, and access them at any time. The system allows for operation permissions to be set at three levels—user, administrator, and engineer—to facilitate effective use and management of the sterilizer.

10. Door-opening temperature: Each program can be set with a specific cooling lock door-opening temperature based on the thermal inertia of the sterilized items. This prevents users from opening the door when the items (especially liquid sterilized items) are still in an unsafe condition, thus avoiding burns.

11. Drying function: Thorough drying that meets CE standards, with a cooling lock mechanism.

12. One-touch inquiry function: Allows checking of current time, total number of sterilization cycles, fault occurrence time, and codes.

13. Scheduled start function: Allows you to set a start time so that the sterilizer automatically starts at the scheduled time.

Model:
HB65/ HB90/ HB110