IL-6 / Interleukin-6 Control

Permagen’s 15 mL / 50 mL Adapter Plate was designed with automation in mind. The SBS/ SLAS footprint (127.75mm x 85.50mm) will act as an insert on your automated liquid handler allowing any of our Centrifuge Tube racks to essentially become ready for automation

Allows the transfer from large volumes into microplates etc. where magnetic separation cannot be achieved

Features include solid aluminum alloy design with hard coat finish for years of trouble-free use, and simple integration

SKU #

MSR1550ADP

Features

• Aluminum alloy design for years of trouble-free use
• Held to tighter tolerances for more consistent results
• SBS/ SLAS footprint (127.75 x 85.5mm) 
• Will fit into any standard robot with enough room to fit a Centrifuge tube into

Compatibility

Works with any of our six position Centrifuge Tube Racks

Permagen’s 15 mL / 50 mL Adapter Plate was designed with automation in mind. The SBS/ SLAS footprint (127.75mm x 85.50mm) will act as an insert on your automated liquid handler allowing any of our Centrifuge Tube racks to essentially become ready for automation

Overview

• Detection kits for the HPV (High Risk)
• Available in TaqMan format for analysis

More than 70 types of human papillomavirus (HPV) have been identified, and are generally classified as high-risk or low-risk depending on their relationship or lack of relationship with cancer and high-grade cervical intraepithelial neoplasia (CIN 2-3). HPV viruses are predominantly sexually transmitted and high-risk HPV types are a major risk factor for development of cervical cancer. Low-risk HPV types 6 and 11 have been associated with the presence of genital warts. There are many other low-risk HPV types that are not associated with genital warts or cervical cancer. Until now, HPV cannot be cultured in vitro, and immunological tests are inadequate to determine the presence of HPV cervical infection. On the other hand, biopsies can be analyzed by nucleic acid hybridization to directly detect the presence of HPV DNA. HPV 16 and HPV 18 have been considered as high-risk cancer associated HPV types.

HPV (High Risk) TaqMan PCR Kit, 100 reactions

• Ready to use format, including Master Mix for the target and PCR control to monitor for PCR inhibition and validate the quality
• Specific Primer and Probe mix for the pathogen/virus/viroid of interest
• Primer and Probe mix
• Positive and negative control to confirm the integrity of the kit reagents

HPV (High Risk) TaqMan PCR Probe/Primer Set and Controls, 100 reactions

• Specific Primer/Probe mix and Positive Control for the pathogen/virus/viroid of interest
• Nuclease-free water
• Can be used together with Norgen’s PCR Master Mix (#28007) or customer supplied master mix

For research use only and NOT intended for in vitro diagnostics.

Details

Supporting Data

Figure 1 / 5

Previous

Next

Click for expanded view

Storage Conditions and Product Stability
All kit components can be stored for 2 years after the date of production without showing any reduction in performance.

All kit components should be stored at -20°C upon arrival.

Component	Cat. TM32250 (100 preps)	Cat. TM32210 (100 preps)
MDx TaqMan 2X PCR Master Mix	2 x 700 μL	–
HPV (High Risk) Primer & Probe Mix	280 μL	280 μL
HPV (High Risk) Positive Control	150 μL	150 μL
Nuclease-Free Water (Negative Control)	1.25 mL	1.25 mL
Product Insert	1	1

Overview

• ASTM Type I Water
• Produced by reverse osmosis, ion-exchange, electro-deionization, ultrafiltration, UV treatment (UVC & 185 nm), 0.1 μm membrane filtration
• Nuclease-free, protease-free, endotoxin-free
• Suitable for molecular biology applications (qPCR, NGS etc.)
• Suitable for cell culture applications
• Produced in an ISO certified GMP laboratory
• Water system is routinely monitored for compliance with QC standards

The Norgen water purification system has been designed in conjunction with experts from Millipore Sigma. The Ultrapure NFW is purified in a two-stage process. The first stage, to produce type II water, includes pre-treatment with activated charcoal and polyphosphate, this water then undergoes reverse osmosis, electro-deionization and ion exchange to remove contaminants as well as UV treatment for disinfection. The Pure water then flows to a second system in a clean room with an additional 4 layers of purification. After passing through an additional ion exchange column, the water is then subjected to Ultrafiltration to remove particulates, bacteria, & ionic contaminants down to trace level, the water is then treated with UV light (182 nm wavelength) to break down organic matter. Lastly a second Ultrafilter for the production of pyrogen-, nuclease- and bacteria-free water at 18.2 MΩ. This water is of utmost purity and suitable for direct use in molecular biology applications such as qPCR and NGS, as well as cell culture and other applications.

Product Specifications
pH	n/a (highly pure water does not contain enough ions for an exact pH determination.)
Recommended Storage	Room Temperature
Grade	Ultrapure (ASTM Type I)
Biological Activity	DNase-, RNase-, Protease-, Endotoxin- Free
TOCs	< 50 ppb
Resistivity	> 18 MΩ-cm
Treatment	Not DEPC-Treated
Quantity	100 mL, 500 mL, 1000 mL
Purification Methods	Activated charcoal, polyphosphate, reverse osmosis, electro-deionization, ion exchange, UV, ultrafiltration
Shipping Conditions	Room Temperature

Details

Applications
For use in any molecular biology application

Storage Conditions
Norgen’s Nuclease-Free Water should be stored at room temperature. Storage at +4°C or -20°C is optional.

Precautions and Disclaimers
This product is designed for research purposes only.  It is not intended for human or diagnostic use.